Dieser Shop benötigt aktiviertes JavaScript.
Cette boutique nécessite JavaScript activé.
Questo negozio richiede JavaScript attivato.
This shop requires JavaScript to be enabled.
RCs (736 results) Realflight RC flight simulator RealFlight Evoluion With controller A refreshed and modern user interface More than a dozen of the latest and most popular ultra-micro, sport, scale, EDF and trainer aircraft from E-flite, HobbyZone and Hangar 9, plus several helicopters from Blade 100 additional aircraft Dozens of 3D and PhotoField landscapes Supported platform: Windows 10 & 11 Spektrum InterLink DX Simulator USB controller included Realflight RC flight simulator RealFlight Evoluion Software only A refreshed and modern user interface More than a dozen of the latest and most popular ultra-micro, sport, scale, EDF and trainer aircraft from E-flite, HobbyZone and Hangar 9, plus several helicopters from Blade 100 additional aircraft Dozens of 3D and PhotoField landscapes Supported platform: Windows 10 & 11 Software version without controller Spektrum Receiver AR620 Suitable for most model aircraft, including indoor sports models Antenna-less design for easier installation and full range Integrated flight log and receiver voltage monitoring via telemetry, data transmission to a Spektrum remote control system Rounded lightweight housing Large binding button eliminates the need for a binding plug Supports low latency of 11 ms and standard 22 ms pulse rates Spektrum Receiver AR8020T DSMX 8 channel Telemetry Compatible with all Spektrum DSM2 and DSMX transmitters With full-range telemetry, integrated barometer to provide altitude and vario telemetry data without additional sensors The tying button allows for easy tying and eliminates the need for a tying plug Two external antennas ensure reliable RF coverage from all angles of the aircraft Advanced programming for setting individual failsafe parameters per channel and more Operating voltage: 3.5 - 9 V New
Amewi Remote control DDF-350 2.4 GHz, 10 channel High-quality 10-channel 2.4 GHz remote control Extensive programming options and user-friendly menu navigation Ideal for RC models in various areas Ten controllable channels for maximum flexibility Supports additional modules such as lighting and sound modules Color display with high contrast Jeti Receiver Duplex R5L 2.4 GHz EX Bidirectional transmission Compatible with Duplex 2.4 EX and EX-Bus protocol Supports telemetry Low susceptibility to interference and high range Power is supplied via one of the 5 servo connections Suitable for use with a duplex TX transmitter module New
Spektrum Remote control NX10+ 2.4 GHz DSMX 10-channel, (transmitter only) Supports the download of smart transmitter files Hall effect gimbal Support for user-defined sounds and voice messages USB port for battery charging, USB data transfer and simulator control 3.7 V 6600 mAh 1S lithium-ion transmitter battery and a USB cable for convenient charging via USB Outstanding ergonomics, optimized for comfort and precise, fatigue-free control Spektrum Dongle Wireless Simulator USB DSMX Allows wireless connection of a DSMX/DSM2 transmitter to a PC or mobile device for use as a game controller Does not require additional software or drivers Works with many simulators compatible with USB game controllers, e.g. RealFlight 8.0 or higher and Drone Racing League Compatible with Windows, macOS and Android Spektrum Remote control NX8+ 20-channel DSMX (transmitter only) AS3X+ forward programming Ready-to-use compatibility with intelligent technology Backlit 3.2-inch screen with a resolution of 320 x 240 pixels, multiple color palettes to choose from and user-defined colors Wi-Fi connectivity for easy product registration and firmware updates 250 Model memory 24 programmable mixes, 8 sequencers and up to ten different flight modes Jeti Receiver Duplex REX 10 2.4 GHz EX Bidirectional transmission Compatible with Duplex 2.4 EX and EX-Bus protocol Supports telemetry PPM input/output, UDI digital output and integrated expanders for EX/EX bus devices 2 antennas, each 20 cm long Suitable for use with a Jeti DS/DC transmitter or transmitter module Jeti Receiver Duplex REX 7 2.4 GHz EX, 200 mm antennas Bidirectional transmission Compatible with Duplex 2.4 EX and EX-Bus protocol Supports telemetry PPM input/output, UDI digital output and integrated expanders for EX/EX bus devices 2 antennas, each 200 mm long Suitable for use with a Jeti DS/DC transmitter or transmitter module Traxxas Telemetry receiver Link Wireless Modul Supports setup adjustments and telemetry Self-righting function for compatible E-Maxx and Stampede models App for Android and iOS available for free Data transmission via Bluetooth LE Easy installation on the TQi transmitter Jeti Remote control DS-24II Carbon Line Ruby 24 channel, Duplex EX Illuminated 4-color display with a resolution of 480 x 480 pixels enables perfect readability in all lighting conditions Ball-bearing aluminum multimode sticks with a resolution of 4096 steps and haptic feedback for timers/alarms Extensive telemetry support (Duplex EX/EX Bus/900 MHz) - Data shown on the display in real time Customizable user interface – with model and background image and selectable color scheme Special backup receiver Rsat 900 MHz included New
Amewi Receiver X10F 10-channel, DDF-350 Number of channels: 10 Modulation: FHSS Application: Vehicles Reliable connection to the remote control Ideal for advanced model builders Precise control guaranteed New
Amewi Receiver X6DC 6-channel, DDF-350 Number of channels: 6 Modulation: DSM2/DSMX Application: Vehicles Precise control of model vehicles Stable connection to the remote control Reliable transmission technology Futaba Remote control T16IZS 18-channel 2.4 GHz FASSTest with R7208SB Supported modulations: FASSTest / T-FHSS Air / S-FHSS Mode 1 - 4 adjustable from outside 10 free mixers for completely free programming 7 wing type menus for airplanes, helicopter menu with 8 swashplate types and multicopter menu 30 internal model memories, expandable via SD card R7208SB receiver included SM Modellbau Telemetry module UniSens-E XT60 connector For measuring voltage, current, altitude, power, capacity and speed in an electric model Transferable to transmitter via telemetry - Support for Jeti Duplex, Multiplex M-Link, Graupner HoTT, Futaba, JR DMSS, FrSky and Spektrum (via Spektrum adapter) Connection for receiver signal for remote control of certain functions and GPS logger for data recording in a file Power supply by receiver Parameter settings possible via PC, UniDisplay and telemetry Can be used almost anywhere thanks to its compact size and low weight Jeti Anti-flash connector Anti Spark 5.5 mm Avoids the annoying and plug-destroying flashing when plugging the battery into the controller Support capacitors on the controller are protected ASC socket with special SMD resistors ASC socket is soldered to one of the controller cables (plus or minus, depending on personal pin assignment) Compatible with existing 5.5 mm gold plugs/sockets Jeti Remote control DC-24 II Carbon Line Orange 24-channel transmitter with extensive mixers (30 mixers freely assignable) Ball bearing billets with a resolution of 4096 steps Extensive telemetry support (Duplex EX/EX Bus/900 MHz) - View data on the display in real time or via Bluetooth on a smartphone 4" LCD display with strong backlight, can be read even in sunlight Aluminum unibody with carbon deck 6200 mAh battery – can be charged via USB-C Jeti Receiver Duplex REX 3 2.4 GHz EX, 100 mm antennas Bidirectional transmission Compatible with Duplex 2.4 EX and EX-Bus protocol Supports telemetry PPM input/output, UDI digital output and integrated expanders for EX/EX bus devices 2 antennas, each 100 mm long Suitable for use with a Jeti DS/DC transmitter or transmitter module Optipower Power supply ULTRA Guard 430 Battery & Mainboard The Ultra Guard 430 is a standby power source that replaces the BEC or flight battery in the event of a failure or breakdown Charge and balance the buffer battery in flight with up to 2C Buffer battery: 7.4 V 2S LiPo with 430 mAh capacity Operating voltage: 5 - 9 V Output current (continuous): 5 A SM Modellbau GPS sensor Logger 3 With TEK-Vario and 3-axis accelerometer up to - 16 g With up to 10 Hz recording rate (10 readings/second) and the micro-SD memory card, recordings of almost any length with high detail resolution are possible Full telemetry support from Jeti Duplex, Multiplex M-Link, Graupner HoTT, Futaba, JR DMSS, FrSky, Powerbox Core and Spektrum (via Spektrum adapter) Direct creation of the IGC file for the Online Contest (OLC) with integrated engine noise sensor for ENL measurement Connection of UniLog 1 2 and UniSens-E for data recording possible (not during Futaba, JR DMSS and FrSky operation) Parameter settings possible via PC, UniDisplay and telemetry Jeti Remote control DS-16 II Carbon Line Red Multimode 24 full-fledged control channels Extensive telemetry support (Duplex EX/EX Bus) - real-time data display and storage, graphical data analysis directly on the display possible 3 RF modules (2x 2.4 GHz, 1x 900 MHz optional) Control path resolution: 4096 steps Backlit color display Includes Jeti REX 10 receiver, Li-Ion transmitter battery, charger, carrying strap and aluminum carrying case Carson Remote control Reflex X1 2-channel 2 infinitely variable fully proportional channels Servo reverse for both channels, trim function for throttle and steering, and dual rate for both channels Connector system for Futaba and Graupner J/R Failsafe programmable Battery status indication by means of LED Mini receiver with 4 channels included (36 x 25 x 15 mm) SM Modellbau Telemetry module UniSens-E 140A 4 mm² silicone cable For measuring voltage, current, altitude, power, capacity and speed in an electric model Transferable to transmitter via telemetry - Support for Jeti Duplex, Multiplex M-Link, Graupner HoTT, Futaba, JR DMSS, FrSky and Spektrum (via Spektrum adapter) Connection for receiver signal for remote control of certain functions and GPS logger for data recording in a file Power supply by receiver Parameter settings possible via PC, UniDisplay and telemetry Can be used almost anywhere thanks to its compact size and low weight Jeti Receiver Duplex REX 6 2.4 GHz EX Bidirectional transmission Compatible with Duplex 2.4 EX and EX-Bus protocol Supports telemetry PPM input/output, UDI digital output and integrated expanders for EX/EX bus devices 2 antennas, each 10 cm long Suitable for use with a Jeti DS/DC transmitter or transmitter module Jeti Receiver Duplex REX 10 Assist 2.4 GHz EX Telemetry data and up to 16 stabilized channels for model aircraft and multicopters Supports various copter configurations, from tricopter to octocopter, LED light strips based on WS2812 chips and external camera gimbals with servos Facilitates flying in windy or difficult conditions, aerobatic maneuvers are more accurate and therefore easier to fly without the need for complex setting of mixers Up to 3 adjustable flight modes with options for horizon stabilization and flight altitude Fine adjustment of stabilization settings in flight via a separate channel Use of 3-axis gyroscopes and 3-axis accelerometers Jeti Micro switch magnetic 15A Suitable for switching the receiver power supply Maximum continuous current: 15 A Operating voltage: 4 - 8.4 V DC Light weight of 7 g Dimensions: 32 x 9 x 5 mm Jeti Remote control Duplex DS-12 Carbon Red 2023 + R9 Receiver Special Edition with carbon front panel, full metal gimbals and buttons 3.5" color display with a resolution of 320 x 240 pixels Ball-bearing billet units with a resolution of 4096 steps and wear-free Hall sensors Telemetry-capable 8 channel transmitter, expandable to 16 channels Including Rex 9 receiver and aluminum case Jeti Power supply S BEC Power supply for receiver and servos Input voltages from 2S to 10S Li-XX cells possible Adjustment of output voltage from 5 to 8 V by jumper Also suitable for servos with higher voltages Maximum current of up to 12 A - ideally suited for medium and larger models Spektrum Remote control NX7e+, 14-channel DSMX (transmitter only) 14-channel support and BNF model templates for easy setup of most BNF aircraft Spektrum AirWare programming for simple, ready-to-use programming AS3X+ forward programming 2.8-inch color display (320 x 240) Memory for 250 models Folding antenna for compact storage and transportation Futaba Receiver R3008SB Suitable for airplanes and helicopters Support for T-FHSS S.BUS support and 8 PWM channels Light weight of only 11 g Jeti Power supply MAX BEC 2 12A For powering receiver and servos using NiXX and Li-XX cells Linear voltage stabilizer with jumper adjustable output voltage: 5 V / 5.4 V / 5.7 V or 6 V Indication of the used capacity of the batteries by means of four LEDs To increase safety, the ON state is achieved with the MPX jumper removed High dielectric strength (up to 12-cell NiXX) and low current in OFF state (170 uA) Analog voltage stabilization prevents radio interference Jeti Remote control DS-24II Carbon Line Gray 24 channel, Duplex EX Illuminated 4-color display with a resolution of 480 x 480 pixels enables perfect readability in all lighting conditions Ball-bearing aluminum multimode sticks with a resolution of 4096 steps and haptic feedback for timers/alarms Extensive telemetry support (Duplex EX/EX Bus/900 MHz) - Data shown on the display in real time Customizable user interface – with model and background image and selectable color scheme Special backup receiver Rsat 900 MHz included Jeti Remote control DS-24II Gray 24 channel, Duplex EX Illuminated 4-color display with a resolution of 480 x 480 pixels enables perfect readability in all lighting conditions Ball-bearing aluminum multimode sticks with a resolution of 4096 steps and haptic feedback for timers/alarms Extensive telemetry support (Duplex EX/EX Bus/900 MHz) - Data shown on the display in real time Customizable user interface – with model and background image and selectable color scheme Special backup receiver Rsat 900 MHz included Jeti Receiver Duplex REX 7 Assist 2.4 GHz EX Telemetry data and up to 16 stabilized channels for model aircraft and multicopters Supports various copter configurations, from tricopter to octocopter, LED light strips based on WS2812 chips and external camera gimbals with servos Facilitates flying in windy or difficult conditions, aerobatic maneuvers are more accurate and therefore easier to fly without the need for complex setting of mixers Up to 3 adjustable flight modes with options for horizon stabilization and flight altitude Fine adjustment of stabilization settings in flight via a separate channel Use of 3-axis gyroscopes and 3-axis accelerometers