Serial RS-232/-422/-485 (133 results)

Moxa Series device server NPort 5410- Easy IP address configuration with LCD display
- 10/100 Mbps Ethernet with automatic detection
- Integrated 15 KV ESD overvoltage protection for all serial signals
- Versatile socket operation modes, including TCP server, TCP client and UDP

Delock Serial adapter USB-C – RS-232 D-Sub 9 pin with nuts 1 m- Connection of serial peripherals via USB-C
- Connectors: 1x USB Type-C male - 1x serial DB9 male with nuts
- Chipset: FTDI FT232RL
- Data transfer rate up to 460.8 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length incl. connectors: ca. 1 m

Moxa Series device server NPort 5110- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile operating modes
- Simple Windows utility to configure multiple device servers
- SNMP MIB-II for network management
- Configuration via Telnet or web browser

Moxa Series device server NPort 5210A- Fast, web-based configuration in just 3 steps
- COM port grouping function and UDP multicast applications
- Flexible TCP and UDP operating modes
- Two DC voltage inputs with connection socket and terminal block

Delock Adapter USB 2.0 - Serial RS-232- Connectors: 1 x USB 2.0 Type-A connector and 1xx Serial RS-232 DB9 connector
- Data transfer rate up to 921.6 Kbps
- Compatible with USB 3.0, USB 2.0 and USB 1.1 full speed 12 Mbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length incl. connectors: approx. 130 cm

Delock PCI Express card 90006 1x Serial / RS-232- Connection via PCI-Express 2.0 x1
- External connection: 1x serial RS-232 DB9 connector
- Data transfer rate up to 921.6 Kbps
- Supports 16C950 UART, Active State Power Management (ASPM) and Direct Memory Access (DMA)
- Low-profile bezel included for installation in narrow housings

Delock Serial adapter USB-A connector - Serial socket- This USB 2.0 Type-A to serial adapter from Delock provides an RS-232 port for measuring devices, POS systems, printers, etc
- Connectors: 1 x USB 2.0 Type-A male, 1 x Serial RS-232 DB9 male with screws
- Chipset: FTDI FT232R
- Data transfer rate up to 921.6 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND

Delock Serial adapter 64055 USB Type-A to RS-422/485 DB9- 1x USB 2.0 type A connector
- 1x Serial RS-422/485 DB9 connector
- Terminal block: 1 x serial RS-422/485 DB9 female, 1 x RS-422/485 terminal block 5 pin
- Data transfer rates up to 921.6 Kbps
- With overvoltage protection 600 W and extended temperature range
- Cable length: approx 1.5m

Moxa Series device server NPort 5110A- SNMP MIB-II for network management
- Configuration via Telnet or web browser
- Real COM/TTY drivers for Windows and Linux
- Integrated 15 KV ESD protection for all serial signals
- Standard TCP/IP interface and versatile operating modes

Delock Serial adapter USB-C – RS-232 D-Sub 9 pin with nuts 2 m- Connection of serial peripherals via USB-C
- Connectors: 1x USB Type-C male - 1x serial DB9 male with nuts
- Chipset: FTDI FT232RL
- Data transfer rate up to 460.8 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length incl. connectors: ca. 2 m

Exsys USB interface cable EX-1309-T- Interface RS-232 V.24, RS-422 and RS-485 via 5 pin terminal block
- Connection and power supply via USB 2.0 Type-A
- I/O addresses and interrupt are assigned by the operating system
- Optionally also supports power via DB 9 pin connector

Delock Serial adapter 64073 USB-A - RS-232- Connectors: 1x USB 2.0 Type-A male, 1x RS-232 (DB9) male
- Three LEDs show current transmit and receive status as well as USB power supply
- Data transfer rate up to 1 Mbps
- Integrated driver software for quick installation
- Cable length: approx. 2 m (incl. connectors)

Delock Serial adapter 62964 USB-C- Connection of serial peripherals via USB-C
- USB Type C male to RS-232 (DB9) male
- Data transfer rate up to 1 Mbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length: 1.8 m

Exsys Interface converter EX-23001- Connectors: 1x USB type A connector (upstream), 1x USB type C connector (upstream), 1x 9 pin RS-232 connector (downstream)
- Cable length: 0.5 m
- Standards: USB 1.1/2.0 or RS-232 V.24
- Data transfer rate: 75 baud to 115.2 kBaud

Exsys PCI Express card EX-44082- Connection via PCIe (version 1.0 to 3.0)
- Connectors: 2x 9-pin D-Sub RS-232 male (external), 1x 4-pin floppy male (internal) for power connection
- Supports 5V and 12V power supply on serial connector (pin 9)
- ±15kV ESD protection for RS232 I/O's (IEC1000-4-2)
- I/O address and interrupt allocations by operating system; FIFO buffer (16C550); supports RTS/CTS and XON/XOFF flow control
- Incl. low-profile bezels for installation in narrow housings

Delock PCI Express card 90500 1x Parallel (DB 25)- Connection via PCl-Express 2.0 x1
- External connections: 1x Parallel DB25 socket
- Data transfer rate up to 1.5 Mbps
- Chipset: ASIX AX99100
- Supports IEEE 1284
- Low-profile bezel included for installation in narrow housing

Exsys PCI Express card RS-232/422/485- Connection via PCI-Express (x1 to x16); power supply via SATA
- 2x 9 pin serial connector (RS-232/422/485)
- Adjustable POS (Power over System), 5 V or 12 V
- I/O address and interrupt allocation by operating system
- ATTA Auto Transmitter

Delock PCI Express card 89557 4x Serial / RS232- Connection via PCIe 2.0 x1
- External data ports: 4x serial (RS-232 DB9 connector), 2 each on one slot bracket
- Serial-Specs: Data transfer rate up to 230.4 Kbps, FIFO 256 byte, compatible with 16C950 UART
- Low-profile bezels included for installation in narrow housings

Delock Serial adapter 90414 USB-C- Connection of serial peripherals via USB-C
- USB Type C male to RS-232 (DB9) male
- Data transfer rate up to 1 Mbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length: 1.8 m
- Nine LEDs show the status of RS-232 data and USB power supply

Exsys Range extender EX-47960- Enables long distance transmission of RS-232 signals over network cables
- Two converters: 1x RS-232 socket (9-pin, D-Sub) to RJ45 socket, 1x RJ-45 socket to RS-232 plug
- Cable length up to 50 m (Cat.5/6)
- Transfer rates up to 921.6 kbps
- Full duplex data communication

Delock Serial adapter 64038 USB-C- Connection of serial peripherals via USB-C
- USB Type C male to 1x RS-232 (DB9) male
- Data transfer rate up to 460.8 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length: 15 cm
- LEDs indicate send and receive status and USB voltage

Moxa Series device server NPort 5210- Compact size for easy installation
- Versatile socket operation modes, including TCP server, client and UDP
- Simple, cross-device configuration via Windows utility
- 10/100 Mbps LAN support, SNMB MIB-II for network management
- 15 kV ESD protection for all serial signals

Moxa Series device server NPort 5610-16- 16 RS-232 serial ports with RJ45 connectors
- 10/100 Mbps LAN with Auto-MDI/MDIX
- 15 kV ESD protection for all serial signals
- Simple IP address configuration with LCD display
- Configuration modes: Web console, Telnet console, Windows utility
- Versatile socket operation modes, SNMP MIB-II for network management

Delock PCI Express card 89918 1x Serial / RS232- Connection via PCIe 1.1 x1
- External data ports: 2x serial (RS-232 DB9 connector)
- Serial-Specs: Data transfer rate up to 230.4 Kbps, 256 byte buffer per port, compatible with 16C950 UART
- Low-profile bezels included for installation in narrow housings

Delock Serial adapter USB-A to RS-232 DB9, 3m- 1x USB 2.0 type A connector
- 1x Serial RS-232 DB9 connector with screws
- Data transfer rates up to 921.6 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length: approx. 3 m

Exsys Interface converter EX-1304- Connectors: 1x USB type A connector (upstream), 1x 9 pin RS-232 connector (downstream)
- Standards: USB 1.1/2.0/3.2 Gen 1 or RS-232 V.24
- Data transfer rate: 300 baud to 921.6 kBaud

Delock PCI Express card 89948 1x serial / RS232 ASIX chipset- Connection via PCI-Express 2.0 x1
- External connection: 1x serial RS-232 DB9 connector
- Data transfer rate up to 230.4 Kbps
- Supports 16C950 UART, ASPM, DMA as well as IrDA and multi-drop mode
- Low-profile bezel included for installation in narrow housings

New
Exsys USB interface cable EX-13009- Connections: 1x USB type A plug (upstream), 1x 3 pin terminal block (downstream)
- Standards: USB 1.1/2.0/3.1 resp. RS-485
- Transmission speed: 300 Baud to 921.6 KBaud
- Chipsatz: FTDI
- Cable lenght: 1.0 m

Exsys Interface converter EX-13001- Connectors: 1x USB type A connector (upstream), 1x 9 pin RS-232 connector (downstream)
- Cable length: 1.8 m
- Standards: USB 1.1/2.0/3.2 or RS-232 V.24
- Data transfer rate: 75 baud to 115.2 kBaud

Delock PCI Express card 90007 2x Serial / RS-232- Connection via PCI Express x1, V1.1
- External data ports: 2x serial (RS-232 DB9 connector)
- Data transfer rate up to 921.6 Kbps, 256 byte buffer per port
- Chipset: WCH CH382L
- Compatible with 16C550 / 16C750 UART
- Low-profile bezels included for installation in narrow housings

Exsys PCI card 2x RS-232/422/485- Connection via PCI; power supply via SATA
- 2x 9 pin serial connector (RS-232/422/485)
- Adjustable POS (Power over System), 5 V or 12 V
- I/O address and interrupt allocation by operating system
- ATTA Auto Transmitter

Exsys Interface converter EX-1311-2- USB 1.1/2.0 type A male to RS-232 male (9-pin); 1.8 m cable length
- I/O addresses and interrupt are assigned by the operating system
- Signals RS232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- LED display for RX and TX

Moxa Series device server NPort P5150A- Fast network connection of a serial device
- Supports IEEE 802.3af PoE PD for power supply via network
- Fast, web-based configuration in three steps
- Overcurrent protection for Serial, LAN and power line
- COM port grouping and UDP mulicast applications, COM/TTY drivers (Windows/Linux)
- Screwable connections

Verified
return
Moxa Series device server NPort 5110A- Zustand: Neuwertig Packaging: Geöffnet
- SNMP MIB-II for network management
- Configuration via Telnet or web browser
- Real COM/TTY drivers for Windows and Linux
- Integrated 15 KV ESD protection for all serial signals
- Standard TCP/IP interface and versatile operating modes

Moxa Series device server NPort W2150A- Allows serial devices to be connected to local networks
- WLAN standard: 802.11a/b/g/n; baud rate: 921.6 Kbps
- Web-based configuration via LAN or WLAN; HTTPS and SSH support
- Secure data access via WEP, WPA and WPA2
- Fast, automatic fast roaming; offline port buffering; serial data logging
- Voltage supply via connection socket and terminal block

Exsys Serial adapter EX-47900- Including adapter with 9-pin to 5-pin terminal block
- Suitable for all operating systems
- Operating voltage comes from RS-232 signal
- Can be used with all OS (Linux, Mac, Windows)