Interface cards (401 results)
- +2
Aten Connection cable UC232A1 USB to Serial RS232- Supports the RS232 serial interface
- Fully compatible with USB specifications
- Data transfer rate with up to 921.6 Kbps
- Works with cell phones, PDAs, digital cameras, modems and ISDN terminals
- +2
Delock Serial adapter 62646 USB Type-A to RS-232 with screws- Connectors: 1x USB 2.0 Type-A, 1x Serial DB9 connector with screws
- Cable length incl. connectors: approx. 1.5 m
- Data transfer rate up to 460.8 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Gold plated
- +18
Delock Host bus adapter USB3.1 Gen2 - NVME PCIe M.2 SSD- USB
- External
- Connectors: 1 x SuperSpeed USB 10 Gbps (USB 3.1 Gen 2) Type-A connector, 1 x 67 pin M.2 Key M slot
- Supports M.2 modules in 2280, 2260 and 2242 format with Key M or Key B M on PCIe (NVMe) basis
- Maximum height of components on the module: 1.5 mm, use of double-sided modules possible
- Mass (LxWxH): approx. 110 x 22 x 6 mm
- +8
Delock Serial adapter USB-A – RS-232 D-Sub 9 Pin with nuts -- Connection of serial peripherals via USB-A
- Connections: 1x USB Type-A plug - 1x serial RS-232 DB9 socket
- Chipset: FTDI FT232R
- Data transfer rate up to 921.6 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- +41
Delock Host bus adapter PCIe x16/x8/x4 – M.2, NVMe, Key M- Connectors: 1 x 67 Pin M.2 Key M Slot 1 x PCI Express x16, V4.0
- Interface: PCIe
- Supports M.2 modules in 2280, 2260, 2242 and 2230 format with Key M or Key B M on PCIe basis
- Bootable, as of UEFI version 2.3.1
- Supports NVM Express (NVMe)
- Dimensions (LxWxH) without PCIe connector: ca. 90 x 24 x 5 mm
- +10
NewICY BOX Front panel IB-HUB1419-i3- Data connection side B: Type-C USB 3.1 Gen 1, USB Type-E, Type-A USB 3.1 Gen 1 (USB3.0), SD card, Micro SD, Type-C USB 3.2 Gen 2x2
- Number of ports: 4
- Hardware interface: SATA
- +8
Delock SATA controller 4 port SATA PCI Express x1 card LED display- Connection via free PCI Express memory
- Adds four internal SATA ports to the drive
- Allows connecting SSDs, hard drives, DVD drives
- Supports Native Command Queuing, S.M.A.R.T, TRIM, DevSleep, SATA Port Multiplier
- Capable of hot plug, boot
- 5x LED display included
- +9
Delock Sound card USB-A plug - 2x3.5mm jack Plug & Play- Audio channels: Stereo
- Interface: USB
- Up to 16 Bit / 48 kHz sampling rate for recording and playback
- Plug & Play
- Housing material: ABS plastic
- Colour: black
- +11
Delock Serial adapter USB-C – RS-232 D-Sub 9 pin with nuts 1 m- Connection of serial peripherals via USB-C
- Connectors: 1x USB Type-C male - 1x serial DB9 male with nuts
- Chipset: FTDI FT232RL
- Data transfer rate up to 460.8 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length incl. connectors: ca. 1 m
- +7
Delock Serial adapter 62645 USB Type-A to RS-232 with nuts- Connectors: 1x USB 2.0 Type-A, 1x Serial DB9 connector with nuts
- Cable length incl. connectors: approx. 1.5 m
- Data transfer rate up to 460.8 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Gold plated
- +20
Moxa Series device server NPort 5110- Real COM/TTY drivers for Windows and Linux
- Standard TCP/IP interface and versatile operating modes
- Simple Windows utility to configure multiple device servers
- SNMP MIB-II for network management
- Configuration via Telnet or web browser
- +11
Moxa Series device server NPort 5110A- SNMP MIB-II for network management
- Configuration via Telnet or web browser
- Real COM/TTY drivers for Windows and Linux
- Integrated 15 KV ESD protection for all serial signals
- Standard TCP/IP interface and versatile operating modes
- +4
VerifiedDelock Adapter cable USB - Parallel Centronics
return- Zustand: Neu Packaging: Beschädigt
- USB-A to Centronics interface
- Bi-directional interface
- Cable length approx. 0.8 m
- +3
Delock Serial adapter USB - Serial- DB9 to DB25 adapter connector
- Plug with screws
- USB 2.0 to RS-232 adapter
- Adapter for DB9/DB25
- +2
Delock PCI Express card 2x USB 3.0 internal (male connector)- Connection via PCIe 2.0 x1; power supply via SATA 15-pin
- Two internal USB 3.0 19-pin male connectors (up to 5 Gbps)
- Incl. low-profile bezel for installation in narrow housings
- +5
Delock Sound card USB2.0, Virtual 7.1, 24Bit/96Khz 3.5 mm In/Out- Audio channels: 2.0
- Interface: USB 2.0
- +4
Delock PCI Express card 90500 1x Parallel (DB 25)- Connection via PCl-Express 2.0 x1
- External connections: 1x Parallel DB25 socket
- Data transfer rate up to 1.5 Mbps
- Chipset: ASIX AX99100
- Supports IEEE 1284
- Low-profile bezel included for installation in narrow housing
- +2
Delock USB Sound Box 7.1 USB- Audio channels: 7.1
- Interface: USB
- 1 x USB 2.0 Type-B female > 1 x S/PDIF optical digital input 1 x S/PDIF optical digital output 2 x 3.5 mm 3 pin stereo jack female microphone (L, R, Mono) 1 x 3.5 mm 3 pin stereo jack female headset 1 x 3.5 mm 3 pin stereo jack line-in 1 x 3.5 mm 3 pin stereo jack front speaker (L, R) 1 x 3.5 mm 3 pin stereo jack surround (L, R) 1 x 3.5 mm 3 pin stereo jack center / bass 1 x 3.5 mm 3 pin stereo jack rear speaker
- Function keys: volume mute, microphone mute, volume-down, volume-up
- 2 x ADC (analog digital converter) and 8 x DAC (digital analog converter)
- Full-duplex recording and playback
- +10
Delock PCI Express card 89557 4x Serial / RS232- Connection via PCIe 2.0 x1
- External data ports: 4x serial (RS-232 DB9 connector), 2 each on one slot bracket
- Serial-Specs: Data transfer rate up to 230.4 Kbps, FIFO 256 byte, compatible with 16C950 UART
- Low-profile bezels included for installation in narrow housings
- +22
ASUS Host bus adapter HYPER M.2 X16 CARD V2- Use up to four NVMe M.2 SSDs as a bootable NVMe RAID array
- Accepts M.2 SSDs in sizes 2242, 2260, 2280 and 22110 (supports PCIe SSDs only)
- Integrated fan and large heatsink provide cooling
- Connection via PCI-E x16 interface, data transfer rate up to 128 Gbps
- New two-phase power solution with up to 14 watts of power per SSD
- Intel VROC-ready and NVMe RAID support on AMD Ryzen Threadripper
- +4
ASUS Host bus adapter Hyper M.2 x16 Gen5 Card- Large heat sink and active fan reduce the temperatures of M.2 SSDs
- Supports up to four NVMe M.2 2242/2260/2280/22110 PCIe 5.0/4.0 M.2 drives
- Connection via PCI-E 5.0 x16 interface, data transfer rate up to 512 Gbps
- Developed for unthrottled transmission speeds
- Use up to four NVMe M.2 SSDs as a bootable NVMe RAID array
- +8
Delock Serial adapter USB-C – RS-232 D-Sub 9 pin with screws 0.25m- Connection of serial peripherals via USB-C
- Connectors: 1x USB Type-C male - 1x serial DB9 male with screws
- Chipset: FTDI FT232RL
- Data transfer rate up to 230.4 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length incl. connectors: ca. 0.25 m
- +6
Delock Host bus adapter Controller PCI-Ex4 - M.2 NVME, 1Port- PCI-Express x4
- Full-Height; Low profile
- RAID level: No
- Connectors: internal: 1 x 67 pin M.2 Key M slot 1 x PCI Express x4, V4.0 1 x 2 pin header for LED
- Interface: PCIe, Supports NVM Express (NVMe), Bootable, from UEFI version 2.3.1, OS independent, no driver installation required
- Supports M.2 modules in 2280, 2260 and 2242 format with Key M or Key B M on PCIe basis
- +4
Delock PCIe x16 – M.2, NVMe, Key M- PCI-Express x16
- Low profile
- Connectors: 1 x 67 Pin M.2 Key M Slot 1 x PCI Express x16 (4-Lane), V4.0
- Interface: PCIe, Supports M.2 modules in the format 2280, 2260, 2242 and 2230 with Key M or Key B M on PCIe basis, Bootable, starting with UEFI version 2.3.1
- Supports NVM Express (NVMe), 1 x LED indicator, holes in the PCB for cooling the SSD, bracket for closure for x16 PCI Express slots
- +11
Delock Host bus adapter 2 Port SATA PCIe Map- PCI-Express x1
- Full-Height; Low profile
- RAID level: No
- Connectors internal: 2 x SATA 6 Gb/s 7 pin connector, 1 x PCI Express x1, V3.0
- Hot swap and bootable
- +1
Adaptec RAID controller 8 Port SATA3/SAS3 Smart-RAID 3102E-8i- PCI-Express x8
- Full-Height; Low profile
- RAID level: 0/1/1 ADM (Advanced Data Mirroring)/10/10 ADM (Advanced Data Mirroring)
- In mixed mode, devices connected to the same adapter can be used in RAID and HBA mode simultaneously
- Dynamic power management of the adapter to save power up to 30%
- Support for direct-attached SAS and SATA target devices
- +2
Exsys USB interface cable EX-13009- Connections: 1x USB type A plug (upstream), 1x 3 pin terminal block (downstream)
- Standards: USB 1.1/2.0/3.1 resp. RS-485
- Transmission speed: 300 Baud to 921.6 KBaud
- Chipsatz: FTDI
- Cable lenght: 1.0 m
- +8
Delock PCI Express card FireWire- 2x FW B 1x FW A- Data transfer rates: FireWire A up to 400 MbpsFireWire B up to 800 Mbps
- FireWire A up to 400 Mbps
- FireWire B up to 800 Mbps
- Supports OHCI specification 1.1 /li>
- +1
SaleLC-Power LC-PCI-M2-NVME-ARGB- Connectors internal: 1x PCI-Express x4 (x8/x16)
- Adapter for 1x M.2 NVME SSD (PCIe 4.0 x4)
- Data transfer rate up to 64 Gb/s
- Incl. heat sink to avoid overheating
- +5
Delock Sound card 89640 PCI-Express x1 with Toslink In/Out- Connectors: 2x jack (1x line-in, 1x stereo mic-in), 2x S/PDIF TOSLINK (optical digital input and output)
- Daughter card (expansion card) connections: 4x jack: 1x Front Speaker (L/R), x Surround Speaker (L/R), 1x Center/Bass, 1x Rear
- Up to 24 bit / 192 kHz sample rate for recording and playback, signal-to-noise ratio: approx. 92 dB
- Supports 7.1 channel sound, ASIO and WASAPI
- Low-profile bezels included for PCs with narrow cases
- +3
Broadcom RAID controller MegaRAID 9540-8i- PCI-Express x8
- Full-Height; Low profile
- RAID level: 0/00/1/10
- Connect up to 63 SAS/SATA devices and 4 NVMe devices
- Balance protection and performance for critical applications with RAID 0, 00, 1, 10
- Support critical, high-bandwidth applications with PCIe 4.0 connectivity, Advanced security through hardware secure boot
- +53
Delock Serial adapter USB-A connector - Serial socket- This USB 2.0 Type-A to serial adapter from Delock provides an RS-232 port for measuring devices, POS systems, printers, etc
- Connectors: 1 x USB 2.0 Type-A male, 1 x Serial RS-232 DB9 male with screws
- Chipset: FTDI FT232R
- Data transfer rate up to 921.6 Kbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- +6
Delock Converter 61635 SATA - IDE- 40-pin IDE to SATA
- Supports ATA 100 and ATA 133
- No driver required
- Converter
- +8
Delock Host bus adapter PCI-Ex16v4 - M.2 Key-B, M.2 Key-M, mSATA- PCI-Express x16; SATA
- Low profile
- RAID level: No
- +1
Delock Host bus adapter PCI-Express x16 - 4 x NVMe M.2 Key M 110 mm- PCI-Express x16
- Full-Height; Low profile
- RAID level: No
- Connectors: internal: 4 x 67 Pin M.2 Key M Slot , 1 x PCI Express x16, V4.0
- Interface: PCIe, supports M.2 modules in 22110, 2280 and 2260 format with Key M or Key B M on PCIe (NVMe) basis
- Maximum height of components on the module: 1.5 mm, use of double-sided modules possible, supports NVM Express (NVMe)
- +9
Delock Serial adapter 64055 USB Type-A to RS-422/485 DB9- 1x USB 2.0 type A connector
- 1x Serial RS-422/485 DB9 connector
- Terminal block: 1 x serial RS-422/485 DB9 female, 1 x RS-422/485 terminal block 5 pin
- Data transfer rates up to 921.6 Kbps
- With overvoltage protection 600 W and extended temperature range
- Cable length: approx 1.5m
- +3
Delock Serial adapter 64073 USB-A - RS-232- Connectors: 1x USB 2.0 Type-A male, 1x RS-232 (DB9) male
- Three LEDs show current transmit and receive status as well as USB power supply
- Data transfer rate up to 1 Mbps
- Integrated driver software for quick installation
- Cable length: approx. 2 m (incl. connectors)
- +7
Exsys USB interface cable EX-13003- Connections: 1x USB-C plug + A adapter (upstream), 2x 9 pin terminal block (downstream)
- Standards: USB 1.1/2.0/3.2 resp. RS-232 V.24, RS-422/485 and TTL
- Transmission speed: 300 Baud to 921.6 KBaud
- Chipsatz: FTDI
- Cable lenght: 1.0 m
- +5
Delock Host bus adapter Controller PCI-Express-X4 - U.2, 2.5"- PCI-Express x4
- Full-Height
- RAID level: No
- Connectors: internal: 1 x U.2 SFF-8639 female 1 x PCI Express x4, V4.0 1 x 2 pin LED header
- For 2.5″ NVMe SSD
- Supports NVM Express (NVMe)
- +7
ICY BOX Front panel IB-HUB1417-i3 USB 3.0 Type-C/Type-A Hub 3.5"- 3.5" front panel with USB 3.0 Type-C and Type-A hub with card reader
- 1x USB Type-C and 2x USB Type-A with a transfer rate of up to 5 Gbit/s
- SD and microSD dual card reader (UHS-I) up to 100 MB/s
- Supports multi-LUN, HC- and XC-I standards up to 2TB
- Frame made of solid metal
- Fits a standard 3.5" (8.89 cm) mounting bay
- +1
Exsys Range extender EX-47961 PC-to-PC via RS-232- Connection of two PCs via RS-232 interface
- Data transmission via a Cat.5 or Cat.6 cable (up to 50 m)
- Transmitter: RS-232 socket (9-pin, D-Sub) to RJ45 socket
- Receiver: RJ45 jack to RS-232 jack (9-pin, D-Sub)
- Full duplex data communication, transfer rate up to 230.4 kBaud
- Suitable for all operating systems, no power supply needed
- +3
Exsys USB interface cable EX-1309-T- Interface RS-232 V.24, RS-422 and RS-485 via 5 pin terminal block
- Connection and power supply via USB 2.0 Type-A
- I/O addresses and interrupt are assigned by the operating system
- Optionally also supports power via DB 9 pin connector
- +2
Speedlink Sound card Vigo USB- For connecting microphone and headset via USB port
- Balanced stereo sound on any PC or notebook computer
- Compact design and light weight - ideal for notebooks
- Easy installation without additional drivers
- +11
Delock SATA controller PCI-Ex4 - 5x SATA3 internal- PCI-Express x4
- Full-Height; Low profile
- RAID level: No
- +4
Delock PCI Express card 89297- Internal connectors: 1x PCIe 2.0 x1, 1x SATA power connector
- External ports: 4x USB 3.0 type A
- Data transfer rate up to 5 Gbs
- Backward compatible with USB 2.0 and USB 1.1
- +8
Delock Adapter USB 2.0 - Serial RS-232- Connectors: 1 x USB 2.0 Type-A connector and 1xx Serial RS-232 DB9 connector
- Data transfer rate up to 921.6 Kbps
- Compatible with USB 3.0, USB 2.0 and USB 1.1 full speed 12 Mbps
- Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- Cable length incl. connectors: approx. 130 cm
- +6
Delock Host bus adapter PCI Express x1 to M.2 Key M Adapter- PCI-Express x1
- M.2
- RAID level: No
- Supports NVM Express (NVMe)
- Bootable
- Plug & Play
- +10
Delock Converter 61987 IDE - SATA- Enables connection of 2.5 IDE devices to SATA interfaces
- Supports Ultra DMA mode 16.7, 25, 33, 48, 66, 100, 133 and 150 MB/s
- Compatible with Serial ATA Specification 1.0
- Supports S.M.A.R.T., AAM, APM as well as SATA Hot-Plug
- Supports PIO mode 0 to 4