Barcode scanner accessories (112 results)
- +11
Datalogic Back-up battery RGP-2X00- Fits Datalogic QuickScan QM2400 and QBT2400 bar code scanners
- Lithium-ion, 1400 mAh (approx. 30'000 readings per charge in continuous mode)
- +3
Datalogic Back-up battery RBP-9001- Suitable for Datalogic PowerScan PM9500, PM9100, PBT9100, PM9300, PBT9300, PM9501, PBT9501, PM9500 and PBT9500 barcode scanners
- Lithium-ion, 2150 mAh (approx. 30.000 readings per charge in continuous mode)
- Click-on/off mechanism: can be changed in 3 seconds
- +4
Datalogic Pedestal STD-QD24-BK- Suitable for QuickScan QD24xx
- Easy fixation of the scanner
- Flexible alignment thanks to gooseneck
- Can be screwed to the substrate
- +1
Zebra Technologies Bracket Electronic Trigger Handle- Uses electrical trigger via contacts on back side of TC22 / TC27
- Product in pistol form factor, ideal for scan-intensive operations
- Requires rugged boot
- Does not block access to the rear camera
- Compatible with both standard and extended capacity batteries
- Not compatible with Hand Strap
- +1
VerifiedHoneywell Power pack 46-00526
return- Zustand: Neuwertig Packaging: Geöffnet
- AC adapter for 7625, Voyager, 1300G, 1900/1902
- +2
Datalogic Charging station BC2030- Base station suitable for Datalogic QBT2430 handheld scanners
- Multi-interface: RS-232, USB and keyboard wedge
- 2.4 GHz Bluetooth transmission
- +5
SaleDatalogic Charging station Single slot for Memor 10- Charging station, 1 bay
- For Datalogic Memor 10
- Requires power supply 94ACC0197 (not included)
- +1
Delock Shuttering sleeve for ring scanner 90508- Protects from light shocks and dust
- Dimensions (LxWxH): approx. 48 x 33 x 20 mm
- Compatible with Delock ring scanner 90508
- Made from silicone
- +1
Datalogic Charging station BC9630- Base station suitable for Datalogic PM9600 handheld scanners
- Multi-interface: RS-232, USB
- 433 MHz radio transmission
- +7
Datalogic Connection cable CAB-426E2 USB- USB cable
- Suitable for various barcode scanners from Datalogic
- Gryphon Desk
- Gryphon Desk 2D Plus
- +6
Datalogic Power pack 12 Volt PG12-10P55 Kit- To charging/transfer station
- Power cable included (Euro flat plug, 1.8 m)
- +13
ProGlove Index Trigger Right Hand Size M, 10 pieces- Hand cuff for hands-free guidance of a ProGlove MARK series barcode scanner
- Variant: size M, right hand, 10 pieces
- Trigger sideways between thumb and index finger
- Comfortable reinforced seams
- Variable size adjustment
- Can also be used as an overcoat with a glove
- +2
Honeywell Power pack PS-05-1000W-C- Power supply for the scanner
- Input voltage 90-250 V
- Output voltage 5.2 V
- +2
Zebra Technologies Screen protector- Tempered glass
- Includes: Alcohol wipes, cleaning cloth, and instructions needed for screen protector installation
- +1
Honeywell Connection cable RS-232- Coiled cable, stretched 3 m
- Side A: RS-232 TTL (DB9, female)
- Side B: 10 pin modular connector (similar to RJ50)
- Secondary connection: Standard HSM DC connection (max. 5 V)
- +29
Zebra Technologies Pedestal Intellistand for DS2208/4308/8108- Table mount (screwable) for Zebra DS2208/4308/8108
- Flexible alignment thanks to gooseneck
- +3ProGlove Index Trigger Right Hand Size L, 10 pieces
- Hand cuff for hands-free guidance of a ProGlove MARK series barcode scanner
- Variant: size L, right hand, 10 pieces
- Trigger sideways between thumb and index finger
- Comfortable reinforced seams
- Variable size adjustment
- Can also be used as an overcoat with a glove
- +3
ProGlove Index Trigger Left Hand Size M, 10 pieces- Hand cuff for hands-free guidance of a ProGlove MARK series barcode scanner
- Variant: size M, left hand, 10 pieces
- Trigger sideways between thumb and index finger
- Comfortable reinforced seams
- Variable size adjustment
- Can also be used as an overcoat with a glove
- +5
Datalogic Back-up battery RBP-GM45- Replacement battery RBP-GM45
- Compatible for Gryphon 4500 series Wireless
- Removable battery
- +2
Datalogic Charging station C-6000- For Datalogic RIDA DBT6400
- Power supply included (local plug adapter required)
- +26
SaleDelock Velcro tape for ring scanner 90508- Velcro for reuse
- Dimensions (LxWxH): approx. 160 x 9 x 1 mm
- +1SaleProGlove Index Trigger Left Hand Size L, 10 pieces
- Hand cuff for hands-free guidance of a ProGlove MARK series barcode scanner
- Variant: size L, left hand, 10 pieces
- Trigger sideways between thumb and index finger
- Comfortable reinforced seams
- Variable size adjustment
- Can also be used as an overcoat with a glove
- +6ProGlove Index Trigger Right Hand Size S, 10 pieces
- Hand cuff for hands-free guidance of a ProGlove MARK series barcode scanner
- Variant: size S, right hand, 10 pieces
- Trigger sideways between thumb and index finger
- Comfortable reinforced seams
- Variable size adjustment
- Can also be used as an overcoat with a glove
- +2
Delock Glove for 90605 barcode scanner- Scanner attached to the glove by a snap-in mechanism
- Material: PU / neoprene / polymer / nylon
- Dimensions (LxWxH): approx. 175 x 100 x 25 mm
- +1
Delock Glove for 90605 barcode scanner- Scanner attached to the glove by a snap-in mechanism
- Material: PU / neoprene / polymer / nylon
- Dimensions (LxWxH): approx. 175 x 100 x 25 mm
- 0
Zebra Technologies Bracket Protective Case- Increases protection from a drop height of 1.5 m
- Compatible with devices using Standard or Extended Capacity battery
- Compatible with Hand Strap
- 0
Zebra Technologies Charging station Single Slot Cradle charge-only- Charges a battery with standard capacity from 0 to 80% in less than 1 hour and 20 minutes
- Charges the battery with extended capacity from 0 to 80% in less than 1 hour and 50 minutes
- Compatible with TC22 / TC27 devices with hand straps, trigger handle or protective cap when the washer is removed
- Contains: Washer for use with TC22 / TC27 without rugged boot
- S.O.
Datalogic Connection cable CAB-465 3.6m- USB cable 3.6m
- Suitable for various barcode scanners from Datalogic
- 0
Zebra Technologies Charging station Single Slot Cradle charge and communication- Charges a battery with standard capacity from 0 to 80% in less than 1 hour and 20 minutes
- Charges the battery with extended capacity from 0 to 80% in less than 1 hour and 50 minutes
- Compatible with TC22 / TC27 devices with hand straps, trigger handle or protective cap when the washer is removed
- Contains: Washer for use with TC22 / TC27 without rugged boot
- Ethernet connection and USB synchronisation
- 0
Datalogic Connection cable 90A052066 USB-A, Coiled, 5 m- For computer connection of Datalogic Gryphon base stations
- USB Type-A, Enhanced, Coiled cable
- Length: 5 m
- S.O.
Datalogic Connection cable 90A052208 USB-A 4.5m for GD4400- USB connection cable, 4.5 m
- For Datalogic Gryphon GD4400 series barcode scanners
- -1
Datalogic Connection cable RS232 / CAB-433- RS232 connection cable for hand scanner, 1.8 m, straight
- Fits Datalogic PowerScan M8300 and PM9500 bar code scanners
- 0
Zebra Technologies Battery Standard Battery 3800 mAh- High-quality battery cells with a long service life
- 0
Datalogic Bracket Pistol Grip for Memor 10- Pistol Grip Holder for Datalogic Memor 10 and Memor 10 HC
- Requires protective cover (Rubber Boot) 94ACC0193
- 0
Datalogic Charging station Triple slot for Memor 10- Charging station, 3 shafts
- For Datalogic Memor 10
- Requires power supply 94ACC0197 (not included)
- 0
Datalogic Service agreement SHIELD for Memor 10 3 years- For Datalogic Memor 10
- Covers normal wear and tear, labor/spare parts, return shipping and firmware updates
- Bring-in warranty; term: 3 years
- Repair time: 5 days
- 0Datalogic Service agreement COMPREHENSIVE for Memor 10 3 years
- For Datalogic Memor 10
- Covers normal wear and tear, accidental damage, labor/spare parts, round-trip shipping and firmware updates
- Bring-in warranty; term: 3 years
- Repair time: 5 days
