Scanner accessories (222 results)
- +2
Zebra Technologies Bracket Protective Case- Increases protection from a drop height of 1.5 m
- Compatible with devices using Standard or Extended Capacity battery
- Compatible with Hand Strap
- +6
Datalogic Back-up battery RGP-2X00- Fits Datalogic QuickScan QM2400 and QBT2400 bar code scanners
- Lithium-ion, 1400 mAh (approx. 30'000 readings per charge in continuous mode)
- +3
Datalogic Pedestal STD-QD24-BK- Suitable for QuickScan QD24xx
- Easy fixation of the scanner
- Flexible alignment thanks to gooseneck
- Can be screwed to the substrate
- +1
Zebra Technologies Charging station Single Slot Cradle charge-only- Charges a battery with standard capacity from 0 to 80% in less than 1 hour and 20 minutes
- Charges the battery with extended capacity from 0 to 80% in less than 1 hour and 50 minutes
- Compatible with TC22 / TC27 devices with hand straps, trigger handle or protective cap when the washer is removed
- Contains: Washer for use with TC22 / TC27 without rugged boot
- +7
Datalogic Back-up battery RBP-9001- Suitable for Datalogic PowerScan PM9500, PM9100, PBT9100, PM9300, PBT9300, PM9501, PBT9501, PM9500 and PBT9500 barcode scanners
- Lithium-ion, 2150 mAh (approx. 30.000 readings per charge in continuous mode)
- Click-on/off mechanism: can be changed in 3 seconds
- +4
Zebra Technologies Battery Standard Battery 3800 mAh- High-quality battery cells with a long service life
- +1
Datalogic Charging station BC2030- Base station suitable for Datalogic QBT2430 handheld scanners
- Multi-interface: RS-232, USB and keyboard wedge
- 2.4 GHz Bluetooth transmission
- +8
Zebra Technologies Bracket Electronic Trigger Handle- Uses electrical trigger via contacts on back side of TC22 / TC27
- Product in pistol form factor, ideal for scan-intensive operations
- Requires rugged boot
- Does not block access to the rear camera
- Compatible with both standard and extended capacity batteries
- Not compatible with Hand Strap
- +5
Ricoh Document sleeves PA03360-0013- Color: transparent
- Dimensions: approx. 23.1 x 36.1 x 1 cm
- Content: 5pcs
- +1
Datalogic Connection cable RS232 / CAB-433- RS232 connection cable for hand scanner, 1.8 m, straight
- Fits Datalogic PowerScan M8300 and PM9500 bar code scanners
- +2
Ricoh Wearing parts iX500 / iX500 Deluxe- Feed roller
- Brake roller
- Lifetime of up to 200,000 documents
- Fits ScanSnap iX500 and iX500 Deluxe models
- +6
Datalogic Connection cable 90A052066 USB-A, Coiled, 5 m- For computer connection of Datalogic Gryphon base stations
- USB Type-A, Enhanced, Coiled cable
- Length: 5 m
- +3
Ricoh Consumable kit for 3805-090K- Includes 1x feed roller, 3x separating rubber (pad)
- Estimated service life: Up to 90.000 scans or one year
- +1
Datalogic Charging station C-6000- For Datalogic RIDA DBT6400
- Power supply included (local plug adapter required)
- +1
Delock Shuttering sleeve for ring scanner 90508- Protects from light shocks and dust
- Dimensions (LxWxH): approx. 48 x 33 x 20 mm
- Compatible with Delock ring scanner 90508
- Made from silicone
- +5
SaleDatalogic Charging station Single slot for Memor 10- Charging station, 1 bay
- For Datalogic Memor 10
- Requires power supply 94ACC0197 (not included)
- +5
Ricoh Wearing parts FI-71XX / FI-72XX- 2x feed and 2x brake rollers
- Lifetime up to 400.000 documents or 1 year
- fi-71xx
- fi-72xx
- +1
VerifiedKodak Wearing parts Feeder i2900 / i3000 Series
return- Zustand: Neu Packaging: Beschädigt
- 2 separation rollers and 1 feeding module
- 4 Spare tire for feeder module
- 4 pre-separation pads
- 4 Spare tires for separation roller
- +3
Ricoh Ricoh Roller- Ricoh 3836-200K Roller
- Estimated service life of up to 200.000 scans
- Compatible with the Fi-8040 scanner
- +1VerifiedRicoh Ricoh Roller
return- Zustand: Neu Packaging: Geöffnet
- Ricoh 3836-200K Roller
- Estimated service life of up to 200.000 scans
- Compatible with the Fi-8040 scanner
- +3
Delock Pedestal for barcode scanners 90557 and 90562- Stand for Delock Barcode Scanner 90557 and 90562
- Gooseneck for flexible alignment
- Mounting holes for attachment to a table top
- +4
Datalogic Power pack 12 Volt PG12-10P55 Kit- To charging/transfer station
- Power cable included (Euro flat plug, 1.8 m)
- +5
Datalogic Connection cable CAB-426E2 USB- USB cable
- Suitable for various barcode scanners from Datalogic
- Gryphon Desk
- Gryphon Desk 2D Plus
- +7
Canon Wearing parts Exchange Roller Kit DR-M260/ScanFront 400- Replacement roller set
- For Canon ScanFront 400 and imageFORMULA DR-M260
- +3
Canon Wearing parts Exchange Roller Kit imageFORMULA DR-Gxxx- Replacement roller set
- For Canon imageFORMULA DR-G2090, DR-G2110, DR-G2140, DR-G1100 and DR-G1130
- +11
Zebra Technologies Screen protector- Tempered glass
- Includes: Alcohol wipes, cleaning cloth, and instructions needed for screen protector installation
- +4
ProGlove Index Trigger Right Hand Size M, 10 pieces- Hand cuff for hands-free guidance of a ProGlove MARK series barcode scanner
- Variant: size M, right hand, 10 pieces
- Trigger sideways between thumb and index finger
- Comfortable reinforced seams
- Variable size adjustment
- Can also be used as an overcoat with a glove
- +1
Honeywell Connection cable RS-232- Coiled cable, stretched 3 m
- Side A: RS-232 TTL (DB9, female)
- Side B: 10 pin modular connector (similar to RJ50)
- Secondary connection: Standard HSM DC connection (max. 5 V)
- +1
Honeywell Power pack PS-05-1000W-C- Power supply for the scanner
- Input voltage 90-250 V
- Output voltage 5.2 V
- +3
Datalogic Back-up battery RBP-GM45- Replacement battery RBP-GM45
- Compatible for Gryphon 4500 series Wireless
- Removable battery
- +4
Zebra Technologies Connection cable IF STD-DB9 Female, 2m- Cable length of two meters
- Requires the optional power supply
- +2ProGlove Index Trigger Right Hand Size S, 10 pieces
- Hand cuff for hands-free guidance of a ProGlove MARK series barcode scanner
- Variant: size S, right hand, 10 pieces
- Trigger sideways between thumb and index finger
- Comfortable reinforced seams
- Variable size adjustment
- Can also be used as an overcoat with a glove
- +38
Zebra Technologies Pedestal Intellistand for DS2208/4308/8108- Table mount (screwable) for Zebra DS2208/4308/8108
- Flexible alignment thanks to gooseneck
- +26
SaleDelock Velcro tape for ring scanner 90508- Velcro for reuse
- Dimensions (LxWxH): approx. 160 x 9 x 1 mm
- +1
ProGlove Charging station 10-Slot Charging Station Bundle EU- 10 charging bays
- Compatible with ProGlove MARK series barcode scanners
- Visual and audible feedback on charging status
- EU power supply included (Z007-000)
