Solar (1137 results)
- +34
Zendure Energy store AB3000L LiFePO₄ Extension battery 2880Wh- Max. discharge capacity: 1.68 kW
- Useful capacity: 2.88 kWh
- Max. charge capacity: 1.68 kW
- Weight: 26.3 kg
- +54
FURBER.power Adapter cable FC4 to XT60 5 m- Allows connection of solar modules with MC4 connector to power stations with XT60 input
- Cable diameter: 4 mm²
- Voltage: max. 300 V
- Length: 5 m
Also available in: - +7
Zendure Energy store SolarFlow 2400 AC+- Max. discharge capacity: 2.4 kW
- Useful capacity: 2.4 kWh
- Max. charge capacity: 2.4 kW
- Weight: 27.8 kg
- -34
Technaxx Solar balcony power station 600W TX-355- Simple installation: connect, get started, save energy
- 2 x 440W bifacial solar modules (monocrystalline - half cells)
- 600 W Hoymiles micro inverter, WiFi integrated
- 2x bracket (balcony, floor, wall) + 4x hooks + 4x metal cable ties
- 5m connection cable T13 IP55
- -37
NewMarstek Marstek Energycube Venus E Max 10 kWh 10 kWh, 3.6 kW- 10 kWh LFP storage capacity
- 3.6 kW bidirectional power Can be limited to 600 W
- Emergency power switchover in less than 10 ms
- Over 10,000 charge cycles
- Expandable to 30 kWh
- IP65 Dust and Water Protection
- +42
Zendure Energy store SolarFlow 1600 AC+ 1.92 kWh LiFePO4- 1600 W bidirectional AC output power in three stages
- Basic capacity of 1.92 kWh expandable up to 11.52 kWh
- 100 percent compatible with existing rooftop PV systems
- ZENKI AI energy management to optimize efficiency
- ZenGuard protection system with dual BMS and fire extinguishing system
- Plug-and-play installation without specialist cabling required
- +312
FURBER.power Solar cable 6 mm² FC4, set, 10 m- Set of two cables, red and black
- Operating temperature: -40 °C ~ 90 °C
- Conductor cross section: 6 mm²
- Cable diameter: 6.1
- Protection class: IP67 dust and waterproof
- EN 50618 / IEC 62930: AC max. 1000 / 1000 V, DC max. 1500 V
Also available in: - +26
Zendure SolarFlow 2400 AC 17.28 kWh kit with 6x AB3000X expansion battery- Max. discharge capacity: 2.4 kW
- Useful capacity: 17.28 kWh
- Max. charge capacity: 2.4 kW
- Weight: 166.72 kg
- +384
FURBER.power Solar cable 6 mm² FC4, set, 5 m- Set of two cables, red and black
- Operating temperature: -40 °C ~ 90 °C
- Conductor cross-section: 6 mm²
- Protection class: IP67 dust and waterproof
- EN 50618 / IEC 62930: AC max. 1000 / 1000 V, DC max. 1500 V
Also available in: - +674
FURBER.power Plug and socket connector FC4, duopack- Solar plug and socket with matching tool
- For solar cable 4 mm² and 6 mm²
- Protection class: IP67 dust and waterproof
- +283
FURBER.power Solar cable 4 mm² FC4, set, 5 m- Set of two cables, red and black
- Operating temperature: -40 °C ~ 90 °C
- Conductor cross section: 4 mm²
- Cable diameter: 5.5 mm
- Protection class: IP67 dust and waterproof
- EN 50618 / IEC 62930: AC max. 1000 / 1000 V, DC max. 1500 V
Also available in: - +32
FURBER.power Adapter cable FC4 on XT60 10 m- Allows connection of solar modules with MC4 connector to power stations with XT60 input
- Cable diameter: 4 mm²
- Voltage: max. 300 V
- Length: 10 m
Also available in: - +197
FURBER.power Y-distributor FC4 1 to 2, set- For connecting 2 solar panels
- 1 plug to 2 sockets
- 1 socket to 2 plugs
- Conductor diameter: 4 mm²
- Cable diameter: 5.5 mm
- Voltage: max. 6500 V / 30 A DC
Also available in: - +189
FURBER.power Solar cable 6 mm² FC4, set, 3 m- Set of two cables, red and black
- Operating temperature: -40 °C ~ 90 °C
- Conductor cross-section: 6 mm²
- Protection class: IP67 dust and waterproof
- EN 50618 / IEC 62930: AC max. 1000 / 1000 V, DC max. 1500 V
Also available in: - +27
Jackery Solar panel SolarSaga 100 W- Power: 100 W
- Monocrystalline solar cells with 23% efficiency
- USB-A (5 V, 2.4 A) & USB-C (5 V, 3 A) charging port for mobile devices
- Foldable
- Dimensions: 1220 x 552 x 20 mm (unfolded), 610 x 552 x 35 mm (folded)
- Weight: 3.6 kg
- +3
Zendure SolarFlow 4000 Mix Pro- Max. discharge capacity: 4 kW
- Useful capacity: 8 kWh
- Max. charge capacity: 4 kW
- Weight: 90 kg
- +11
EcoFlow Solar panel NextGen 220 W- 220 W power output: This bifacial solar panel uses both the front and back to generate energy and, thanks to N-type TOPCon cells, achieves an efficiency of up to 25%
- More power thanks to a bifacial design: The back side also harnesses ambient light, enabling up to 243 W of power under BNPI test conditions
- Lightweight and portable: Weighing just 5.1 kg ± 0.3 kg, with a built-in carrying handle and a foldable design, the panel is easy to transport and can be stored to save space
- Optimal Alignment: The built-in stand is adjustable from 30° to 60°, while the solar angle guide helps ensure optimal alignment with the sun
- Just plug it in: The built-in XT60 cable allows for direct connection to compatible EcoFlow Power Stations
- For outdoor use: With an IP68 rating, the solar panel is protected against water and dust; its dimensions are 227 × 59.8 × 2.6 cm when unfolded and 60.3 × 59.8 × 3.6 cm when folded
Also available in: - +31
Solar Manager Connect 2, Energy Manager- Monitors the energy production of the solar system
- Controls connected loads depending on the availability of solar power – independent of the manufacturer
- Consumers are controlled via their IP interface, cloud connection, IP relays with potential-free contacts or switching adapter plugs
- Offers load management for charging stations, monitoring of the house connection and load shedding
- Clear app with consumption data, operating and configuration menu for the connected devices
- +13
KOOR Solar panel foldable, 90 W- Solar panel with MC4-compatible connections
- High conversion efficiency of up to 25%
- One USB-C and one USB-A port for charging mobile devices
- Folds up compactly, carrying handle simplifies transportation
- Compatible with the ACUX coolers from KOOR
- Dimensions folded: 33.7 x 54.4 cm x 0.6 cm, open: 119 x 54.4 x 0.2 cm
- +158
Zendure Extension battery AB3000X 2.88 kWh Gray- High capacity of 2880 Wh for a reliable power supply
- Long-life LiFePO4 battery technology with a high level of safety
- Robust construction thanks to unibody housing made of die-cast aluminum
- Protection class IP65 for use under various conditions
- Simple extension for the SolarFlow system
- Nominal voltage of 48 V and capacity of 60 Ah
- +9
Anker Energy store SOLIX Solarbank 4 E5000 Pro- Efficient Solar Energy Storage for Balcony Power Plants
- Integrated Solar Inverter for Direct Power Feed-in
- Reliable Power Supply for Individuals and Businesses
- Compact design for easy installation
- High-quality memory cells for a long service life
- Ideal for optimizing the use of solar power for personal consumption
- +37
Victron Charge controller SmartSolar MPPT 75/15- Ultra-fast Maximum Power Point Tracking (MPPT)
- Detection of the maximum power point even with partial shading
- Load output
- Flexible loading algorithms
- Overheating protection and load reduction at high temperatures
- Automatic battery voltage detection and intelligent battery management through load shedding
- +9
Zendure SolarFlow 2400 Pro- Max. discharge capacity: 2.4 kW
- Useful capacity: 2.4 kWh
- Max. charge capacity: 2.4 kW
- Weight: 27.8 kg
- +79
Zendure SolarFlow 2400 AC 5.76 kWh kit with 2x AB3000X expansion battery- Max. discharge capacity: 2.4 kW
- Useful capacity: 5.76 kWh
- Max. charge capacity: 2.4 kW
- Weight: 62.32 kg
- +4
EcoFlow Solar panel NextGen 160 W- Solar panel performance: 160 W
- Panel type: Portable
- Frame: Frameless
Also available in: - +61
Jackery Extension cable 5 m DC7909 incl DC8020 adapter- Robust & durable
- PVC sheath with 7 mm diameter
- Stable current transmission
- Cable length: 5 m
- Weight: 612 g
- Suitable for Powerstation Explorer 240 / 500 / 1000 / 2000Pro
- +84
Zendure SolarFlow 2400 AC inverter- Max. discharge capacity: 2.4 kW
- Useful capacity: 2.88 kWh
- Max. charge capacity: 2.4 kW
- Weight: 10.12 kg
- +11
EcoFlow Auxiliary battery DELTA 3 Max Plus 2048 Wh, silver- Capacity expansion up to 4 kWh
- 2048 Wh lithium iron phosphate battery (LFP)
- Integrated battery management system for monitoring
- Operating range from -10 to +45 degrees Celsius
- Compact design with a net weight of 16 kg
- Simple coupling via additional battery connection type 4+8
- +39
Zendure SolarFlow 2400 AC 11.52 kWh kit with 4x AB3000X expansion battery- Max. discharge capacity: 2.4 kW
- Useful capacity: 11.52 kWh
- Max. charge capacity: 2.4 kW
- Weight: 114.52 kg
- +52
Zendure SolarFlow 2400 AC 8.64 kWh kit with 3x AB3000X expansion battery- Max. discharge capacity: 2.4 kW
- Useful capacity: 8.64 kWh
- Max. charge capacity: 2.4 kW
- Weight: 88.42 kg
- +201
FURBER.power Solar cable 6 mm² FC4, set, 2 m- Set of two cables, red and black
- Operating temperature: -40 °C ~ 90 °C
- Conductor cross-section: 6 mm²
- Protection class: IP67 dust and waterproof
- EN 50618 / IEC 62930: AC max. 1000 / 1000 V, DC max. 1500 V
Also available in: - +107
FURBER.power Solar cable 6 mm² FC4, set, 20 m- Set of two cables, red and black
- Operating temperature: -40 °C ~ 90 °C
- Conductor cross section: 6 mm²
- Cable diameter: 6.1
- Protection class: IP67 dust and waterproof
- EN 50618 / IEC 62930: AC max. 1000 / 1000 V, DC max. 1500 V
Also available in: - +29
Zendure SolarFlow AB2000L expansion battery 1920Wh LiFePO4 add-on- Max. discharge capacity: 1.68 kW
- Useful capacity: 1.92 kWh
- Max. charge capacity: 1.68 kW
- Weight: 20.3 kg
- +187
SaleFURBER.power Solar cable 4 mm² FC4, set, 1 m- Set of two cables, red and black
- Operating temperature: -40 °C ~ 90 °C
- Conductor cross section: 4 mm²
- Cable diameter: 5.5 mm
- Protection class: IP67 dust and waterproof
- EN 50618 / IEC 62930: AC max. 1000 / 1000 V, DC max. 1500 V
Also available in: - +16
EcoFlow Solar panel Rigid set of 2 pcs. 450 W- Solar panel performance: 450 W
- Panel type: rigid
- Frame: Black
Also available in: - +4
NewZendure SolarFlow 3000 Mix AC+ 8 kWh- Compact, plug-and-play home energy storage system for existing solar installations
- Solid-state LiFePO4 battery with a capacity of 8,038 Wh
- 3,000 W charging and discharging power (bidirectional)
- AC-coupled configuration with up to 3,000 W of PV input
- Operating temperature range from 20 °C to 55 °C
- +84
Zendure SolarFlow 2400 AC 2.88 kWh kit with 1x AB3000X expansion battery- Max. discharge capacity: 2.4 kW
- Useful capacity: 2.88 kWh
- Max. charge capacity: 2.4 kW
- Weight: 36.22 kg
- +1274
SaleFURBER.power Solar cable 4 mm² FC4, set, 3 m- Set of two cables, red and black
- Operating temperature: -40 °C ~ 90 °C
- Conductor cross section: 4 mm²
- Cable diameter: 5.5 mm
- Protection class: IP67 dust and waterproof
- EN 50618 / IEC 62930: AC max. 1000 / 1000 V, DC max. 1500 V
Also available in: - +10
EcoFlow Energy store Stream AC Pro CH version- 1.92 kWh LFP battery for 6.000 cycles up to 70 percent capacity
- AC coupling technology in a single IP65-certified housing
- Continuous power of 1200 W (automatic increase to 2300 W)
- Up to 800 W as a grid-connected backup source
- 1050 W/10 A AC input for fast charging
- Modular design allows up to six units to be connected for a total of 11.52 kWh storage and 6.300 W input
- +2
NewGROWATT Noah2000 LiFePO4, 2048 Wh- LiFePO4 Battery Module for Balcony Power Plants
- Capacity of 2048 Wh per module
- Expandable to up to 4 battery modules for a total capacity of 8192 Wh
- High cycle stability and long service life
- Easy installation and integration
- Supports up to 4 solar panels
- +45
Swaytronic Fuse holder plug fuse, 2 - 40A- Protection from moisture and humidity
- Suitable for standard fuses from 2 - 40A (fuse is not included)
- With protective cap
- +205
SaleFURBER.power T-distributor FC4 1 to 2, set- For connecting 2 solar panels
- 1 plug to 2 sockets
- 1 socket to 2 plugs
- Cable diameter: 6 mm
- Protection class: IP67 dust and waterproof
- Voltage: max. 6500 V / 30 A DC
Also available in: - +53
Victron Battery Main switch On/Off 275A- Ideal as a disconnector between the battery and the inverter
- Nominal voltage: 48 V
- Max. Continuous current: 275A
- Max. Current 1 minute: 450A
- Peak current: 1200A
- +4
BLUETTI Solar panel PV100 Foldable 100 W- Solar panel performance: 100 W
- Panel type: Portable
- Frame: Frameless
- +2
NewAnker Solix BP2700 2680 Wh A17C53Z1-85- LiFePO4 extension battery for Solarbank 3 Pro
- Capacity of 2.68 kWh per unit
- Expandable up to 16 kWh with a maximum of 5 batteries
- Robust construction in the color grey
- Compatible with Anker Solix systems
- +12
Victron Battery monitor SmartShunt 9-90 VDC 500 A- The SmartShunt is an all-in-one battery monitor
- Battery values can be read out with the VictronConnect app via Bluetooth
- Power supply voltage range: 6.5 - 70 VDC
- Maximum allowed current: 500 A
- Operating temperature range: -40 - 50 °C
- Resolution and accuracy: /- 0.1 A , /- 0.01 V
- +2
NewSunSlice Fusion 60 Monocrystalline 60 W Black- High-performance monocrystalline 60 W solar panel
- Compact, foldable design with built-in stand
- USB-A port with up to 18 W and USB-C port with up to 45 W
- DC 5521 port for maximum power up to 60 W
- Built-in LED to indicate optimal alignment
- Compatible with power banks and power stations
- +31
Zendure SolarFlow 2400 AC 14.40 kWh kit with 5x AB3000X expansion battery- Max. discharge capacity: 2.4 kW
- Useful capacity: 14.4 kWh
- Max. charge capacity: 2.4 kW
- Weight: 140.62 kg