Charge controllers (118 results)

Victron Charge controller SmartSolar MPPT 75/15- Ultra-fast Maximum Power Point Tracking (MPPT)
- Detection of the maximum power point even with partial shading
- Load output
- Flexible loading algorithms
- Overheating protection and load reduction at high temperatures
- Automatic battery voltage detection and intelligent battery management through load shedding

Victron Solar charge controller SmartSolar MPPT 100/50, 12-24 V 50A- Options for displaying data in real time: Color Control panel
- Several maximum performance points with partial shading
- Innovative algorithm for optimum MPP
- No cooling fan required
- Eight pre-programmed charging algorithms
- Protection class: IP43 (electronic components), IP22 (connection area)

Victron Charge controller Orion XS 12-12 V 50A- Fully configurable, including the charging current
- Detection of motor shutdown
- Intelligent charging algorithms
- Works with VictronConnect, optional remote monitoring
- Input voltage range: 8-17 V
- Output voltage setting range: 20-30 V

OfferSale
GoalZero Yeti MPPT charge optimizer 30 A- Victron Energy Smartsolar MPPT Charge Controller
- Maximum solar input power: 440 W
- High efficiency of up to 98%
- 1.8 m long EC8 for power stations
- 4.5 m HPP (High Power Port) cable for solar panels
- Suitable for Yeti 1000X, 1500X, 3000X, 6000X

Victron DC/DC voltage converter Orion-Tr 12-24 V, 5A 120 W- 12 V DC operating voltage, adjustable output voltage 20-30 V
- Can be connected in parallel with similar devices to increase performance
- Remote-controlled on/off switch
- Wide input voltage range: 8-17 V
- 120 W power at 5A continuous current
- High efficiency of 88%

Steca Solar charge controller PR 1010- State of charge determination and advanced charging technology for battery care and control
- Module and load current 10 A, system voltage 12 V (24 V)
- PWM control and independent voltage adjustment
- Over- and low-charge protection as well as reverse polarity protection of module, load and battery
- Protection class IP31, negative grounding of one or positive grounding of several terminals possible
- Input voltage always 2 V above battery voltage

Victron Charge controller SmartSolar MPPT 100/15- Ultra-fast Maximum Power Point Tracking (MPPT)
- Detection of the maximum power point even with partial shading
- Load output
- Flexible loading algorithms
- Overheating protection and load reduction at high temperatures
- Automatic battery voltage detection and intelligent battery management through load shedding

Steca SOLARIX 4040 charge controller- State of charge determination and advanced charging technology for battery care and control
- Module and load current 40 A, system voltage 12 V (24 V)
- PWM control and independent voltage adjustment
- Over- and low-charge protection as well as reverse polarity protection of module, load and battery
- Protection class IP30, negative grounding of one or positive grounding of several terminals possible
- Input voltage always 2 V above battery voltage

Victron Charge controller SmartSolar MPPT 150/35- Ultra-fast Maximum Power Point Tracking (MPPT)
- Detection of the maximum power point even with partial shading
- Load output
- Flexible loading algorithms
- Overheating protection and load reduction at high temperatures
- Automatic battery voltage detection and intelligent battery management through load shedding

Victron Charge controller SmartSolar MPPT 75/10- Ultra-fast Maximum Power Point Tracking (MPPT)
- Detection of the maximum power point even with partial shading
- Load output
- Flexible loading algorithms
- Overheating protection and load reduction at high temperatures
- Automatic battery voltage detection and intelligent battery management through load shedding

Victron Charge controller Orion-Tr 12/12-9A, 110 W- 12 V DC operating voltage, adjustable output voltage 10-15 V
- Can be connected in parallel with similar devices to increase performance
- Can be used for buffer charging of batteries
- Remote-controlled on/off switch
- Protection class: IP43
- Wide input voltage range: 8 V - 17 V

Victron Charge controller Orion-Tr 24/12-5, 60 W- With synchronous rectification, the full charging efficiency exceeds 95%
- Input voltage range: 18-35 V
- Output voltage: 12.7 V
- Continuous current at the output: 5 A
- Maximum output current: 7 A
- Dimensions (H x W x D): 53 x 51 x 27 mm

Steca Solar charge controller PR 1515- State of charge determination and advanced charging technology for battery care and control
- Module and load current 15 A, system voltage 12 V (24 V)
- PWM control and independent voltage adjustment
- Over- and low-charge protection as well as reverse polarity protection of module, load and battery
- Protection class IP31, negative grounding of one or positive grounding of several terminals possible
- Input voltage always 2 V above battery voltage

Victron Charge controller Orion-Tr 24/12-15, 180 W- With synchronous rectification, the full charging efficiency exceeds 95%
- Input voltage range: 18-35 V
- Output voltage: 12.7 V
- Continuous current at the output: 15 A
- Maximum output current: 20 A
- Dimensions (H x W x D): 73 x 94 x 45 mm

Steca SOLARIX 2525 charge controller- State of charge determination and advanced charging technology for battery care and control
- Module and load current 25 A, system voltage 12 V (24 V)
- PWM control and independent voltage adjustment
- Over- and low-charge protection as well as reverse polarity protection of module, load and battery
- Protection class IP30, negative grounding of one or positive grounding of several terminals possible
- Input voltage always 2 V above battery voltage

Victron Solar charge controller SmartSolar MPPT 150/70, 12-48 V 70A TR- Options for displaying data in real time: Color Control panel
- Several maximum performance points with partial shading
- Innovative algorithm for optimum MPP
- No cooling fan required
- Eight pre-programmed charging algorithms
- Protection class: IP43 (electronic components), IP22 (connection area)

Victron Charge controller Orion-Tr 24/12-15, 240 W- With synchronous rectification, the full charging efficiency exceeds 95%
- Input voltage range: 18-35 V
- Output voltage: 12.7 V
- Continuous current at the output: 20 A
- Maximum output current: 25 A
- Dimensions (H x W x D): 73 x 94 x 45 mm

Steca Solar charge controller PR 3030- State of charge determination and advanced charging technology for battery care and control
- Module and load current 30 A, system voltage 12 V (24 V)
- PWM control and independent voltage adjustment
- Over- and low-charge protection as well as reverse polarity protection of module, load and battery
- Protection class IP31, negative grounding of one or positive grounding of several terminals possible
- Input voltage always 2 V above battery voltage

Victron DC/DC voltage converter Orion-Tr 12-12 V, 18A 220 W- 12 V DC operating voltage, adjustable output voltage 10-15 V
- Can be connected in parallel with similar devices to increase performance
- Remote-controlled on/off switch
- Wide input voltage range: 8-17 V
- 220 W power at 18A continuous current
- High efficiency of 87%

Victron Solar charge controller SmartSolar MPPT 150/60, 12-48 V 60A MC4- Options for displaying data in real time: Color Control panel
- Several maximum performance points with partial shading
- Innovative algorithm for optimum MPP
- No cooling fan required
- Eight pre-programmed charging algorithms
- Protection class: IP43 (electronic components), IP22 (connection area)

Velleman Charge controller SOL10UC3 PWM 10 A 12 - 24 V- Solar charge controller
- Increases the life of batteries and improves their performance
- With battery charge indicator
- Suitable for gel, wet and sealed batteries
- With automatic selection of charge and discharge settings
- Protection against overload, short circuit, overdischarge, overvoltage, low voltage and polarity reversal