Solar energy accessories (412 results)
- +32
Swaytronic Fuse holder plug fuse, 2 - 40A- Protection from moisture and humidity
- Suitable for standard fuses from 2 - 40A (fuse is not included)
- With protective cap
- +36
Victron Battery monitor Smart Shunt 6.5-70 V DC 300A- All-in-one battery monitor
- The connection is made via a VE.Direct cable
- Power supply voltage range: 6.5 - 70 V DC
- Maximum permitted current: 300 A
- Operating temperature range: -40 +50 °C
- Dimensions: 44 x 120 x 44 mm
- +2
NewOfferVictron RJ12 6P6C UTP cable 10 m- RJ12 UTP 6P6C connection cable
- Cable length of 10 m
- Unshielded twisted pair (UTP) technology
- +5
NewWATTSTUNDE Solar module holder MOUNT 53 cm White- Aerodynamic design to reduce wind noise
- Made from weather and UV-resistant ASA plastic
- Flexible installation by gluing or screwing
- Optimum ventilation to increase module performance
- Suitable for motorhomes, campers and boats
- Flat and lightweight design for improved aerodynamics
- +45
Victron Adapter cable VE.Direct to USB interface- VE.Direct connection to USB port
- Allows more than two VE.Direct products to be connected to a single CCGX
- In the color black
- +54
Victron Battery Main switch On/Off 275A- Ideal as a disconnector between the battery and the inverter
- Nominal voltage: 48 V
- Max. Continuous current: 275A
- Max. Current 1 minute: 450A
- Peak current: 1200A
- +23
OfferHoymiles Plug connector HMS Field Connector- For cables with an outer diameter of 8 to 9.5 mm
- Applicable cables: 16/18 AWG, 1.0/1.5 mm² copper cable
- Power frequency and dielectric strength: 3000 V AC
- Rated voltage: 300 V
- Rated current: 12 A
- Protection class: IP68
- +11
OfferVictron Extension cable VE.Direct cable 1.8 m- Length: 1.8 m
- For Victron Energy components with VE.Direct communication
- +754
SaleFURBER.power Solar cable tool kit MC4 compatible- Stripping pliers for solar cables up to 6 mm²
- Crimping pliers for MC4 compatible connections
- With two solar plugs and two sockets
- Tool for mounting the MC4 connections
- Packed in a practical case
- +7
OfferVictron Lynx Distributor busbar M10- Four fused connections
- Fuse monitoring available
- Mains LED and four status LEDs
- Voltage range: 9 - 60 V DC
- Protection class: IP22
- Supported system voltages: 12, 24 or 48 V
- +25
Victron Safety equipment BatteryProtect 12/24 V, 65 A- Protects batteries from damage due to discharge
- With overvoltage and explosion protection
- Load disconnection and reconnection delay
- Automatically detects the system voltage
- Special setting for lithium-ion batteries
- Simple programming
- +50
Victron M8 ring cable lug with 30A ATO fuse, IP65- M8 ring cable lugs, 30A ATO fuse
- Protection class: IP65
- +5
Victron Battery Monitor BMV712 Smart 9-90 VDC- Battery monitor with integrated Bluetooth
- Wirelessly read data, adjust settings and perform updates via smartphone with the Victron Bluetooth App
- Measures battery voltage, current, power, amp-hours used and state of charge
- Includes 500 amp quick connect shunt
- Input voltage range: 9.5 - 95 V
- Maximum allowed current: 500 A
- +59
Victron Battery monitor SmartShunt 9-90 VDC 500 A- The SmartShunt is an all-in-one battery monitor
- Battery values can be read out with the VictronConnect app via Bluetooth
- Power supply voltage range: 6.5 - 70 VDC
- Maximum allowed current: 500 A
- Operating temperature range: -40 - 50 °C
- Resolution and accuracy: /- 0.1 A , /- 0.01 V
- +2
Victron Battery monitor SmartShunt 6.5-70 V DC 300A IP65- All-in-one battery monitor
- The connection is made via a VE.Direct cable
- Power supply voltage range: 6.5 - 70 V DC
- Maximum permitted current: 300 A
- Operating temperature range: -40 +50 °C
- Dimensions: 44 x 120 x 38 mm
- +8
OfferVictron High-current distribution bar 150A, 4 x M8- Used for high-current distribution and as connections for batteries or DC devices
- Max. Current: 150A
- Max. Voltage: 70 V DC
- Connection diameter: 4 pieces, 1/4 inch, M8
- Height: 45 mm
- Connection screw material: Corrosion-resistant steel
- +2OfferVictron Extension cable VE.Direct cable 0.3 m
- Length: 0.3 m
- For Victron Energy components with VE.Direct communication
- +28
WATTSTUNDE Adapter cable AK-MC-7909 MC4 to DC7909 male (Jackery)- MC4 connector
- Hollow connector DC7909 (8 mm)
- +37
Swaytronic Connector Anderson, Black- Anderson Plug Black Connector
- With two pins
- Application specific DC cables
- Swaytronic power stations compatible!
- Current carrying capacity: 50A
- Dimensions (L x W x H): 48 x 37 x 16 mm
- +1
OfferVictron UTP cable RJ12 6P6C 3 m- Ve.Direct cable
- For connecting MPPT solar controllers to GX devices
- Length: 3 m
- +7
Swaytronic Fuse holder distributor, 6-fold- Power distribution of the low-voltage applications
- Six individually fused fuses
- With Bus Bar
- Easy assembly
- +9
EcoFlow Smart fan Black- Fan for powerful cooling
- The 7-blade design of the fan offers excellent cooling performance with an air flow of up to 149 m³/h
- Permanently monitors the temperature of the PowerStream microinverter with an integrated sensor
- Switches on and off automatically as required
- Childproof design with contact protection
- +5
Victron Safety equipment Smart BatteryProtect 12/24 V-65A- Protection against deep discharge
- System on/off switch function
- Programmable via Bluetooth
- Operating range voltage: 6-35 V
- Maximum uninterruptible load current: 65A
- Peak current (for 30 seconds): 250A
- +4
EcoFlow Bracket for solar panels- Mountable on balconies, walls, or any flat surface
- 20°-75° adjustable angle when fixed on a flat surface to maximize solar energy collection
- +6
Swaytronic Solar MC4 parallel circuit type 2- Enables several modules to be connected in a row
- Compatible with MC4 connector system; cable diameter Ø 4 mm²
- Improves the efficiency of the solar system
- 1x parallel circuit (W), 1x parallel circuit (M)
- Easy to install
- Protection class: IP67
- +6
OfferHoymiles DTU WLite-S- Sub-1G radio solution with micro inverter
- Plug and Play
- Limited to 4 modules
- Lightweight and compact design
- Real-time microinverter data and alarm on S-Miles Toolkit
- Remote system management in the S-Miles Cloud
- +1
OfferVictron Panel and system monitoring MPPT Control Panel- Configuring and evaluating charge controllers
- Simple monitoring of performance parameters
- Display of a range of values
- Historical data available for 30 days
- Information about charging levels available
- Convenient and simple operation
- +165
SaleBigBlue Solar Y cable MC4 compatible for solar modules- 1 pair of MC4 compatible connectors ( / -)
- Cable length: 140 cm
- Conductor cross section: 2 mm2 / 12AWG
- +1
EcoFlow Charging cable for DELTA Max additional battery 5 m, black- Connects the power station to the intelligent additional battery
- Compatible with EcoFlow DELTA Max, EcoFlow DELTA 2, EcoFlow DELTA Max additional battery
- Connector type: (2 6 pin)
- Length: 5 m
- +6
Victron Interface cable MK3 USB- For configuring the following inverters: Multi, MultiGrid, MultiPlus, MultiPlus-II, Quattro with a VE.Bus communication port
- PC connection cable: USB-A
- +5
Swaytronic Bracket Anderson, installation, Black- Anderson Plug Holder with Crimp Contact
- Suitable for flush mounting
- Supplied without Anderson plug
- +1
EcoFlow Alternator charger 500 watts- 3-in-1 Capability: Functions as a fast charger, battery maintainer, and jump starter, extending the life of both your power station and your vehicle battery
- Wide Compatibility: Supports the EcoFlow DELTA Series as well as third-party power stations (see notes)
- Scalable Power: Expand existing camper or motorhome battery capacity for longer off-grid operation
- Includes XT60 output cable (charging only)
- For reverse charging and battery maintenance, use the XT150 cable with an EcoFlow DELTA Series power station
- Reverse charging and maintenance are not supported via XT60 or with third-party power stations
- +2
OfferVictron Safety equipment Battery Protect BP-220, 12/24 V, 220 A- Protects batteries from damage due to discharge
- With overvoltage and explosion protection
- Load disconnection and reconnection delay
- Automatic detection of the voltage range 12/24 V
- Special setting for lithium-ion batteries
- Simple programming and very low power consumption
- +49
OfferHoymiles Verschlusskappe PV-SVK4 for MC4 minus connector- Sealing cap to seal MC4 solar connector, tightly
- Suitable for MC4 connector (negative pole)
- +22
WATTSTUNDE Adapter cable AK-APP-XT60 Anderson Power Pole on XT60- Anderson Power Pole Plug
- XT60 connector
- Connection of EcoFlow Powerstation
- +123
OfferHoymiles Verschlusskappe PV-BVK4 for MC4 Plus connector- Sealing cap to seal MC4 solar connector, tightly
- Suitable for MC4 connector (plus pole)
