On-road vehicles (206 results)
New
Tamiya Touring car Mercedes Benz CLK AMG, TT-02, Kit, 1:10- Robust TT-02 chassis with all-wheel drive
- Detailed Lexan body (unpainted)
- Spoiler and exterior mirrors made of separate plastic parts
- Independent suspension with friction shock absorber
- Slick tires on 16-spoke rims
- Includes 540 torque tuned brushed motor
Tamiya Pan Car Porsche 956 RWD, 1:10, kit- Direct drive with ball differential on the rear rigid axle
- Tamiya Sport Tuned Motor
- Rigid rear axle with 3-point suspension
- Tamiya Group-C Vintage Chassis
- Adjustable ground clearance
- Unpainted body with stickers enclosed
New
Tamiya Touring car Porsche 911 GT3 (992), TT-02, Kit with ESC, 1:10- Rugged TT-02 chassis with all-wheel drive
- Detailed Lexan body (unpainted)
- Spoiler and exterior mirrors made of separate plastic parts
- Independent suspension with friction shock absorber
- Prepared for optional LED lighting (5 mm light buckets)
- Includes 540 brushed motor and controller
Tamiya Touring car Opel Kadett GT/E MB-01 Kit, 1:10- MB-01 chassis, can be built as FWD or RWD model
- Detailed Lexan body (unpainted)
- Can be optionally equipped with LED headlights
- Independent suspension with friction shock absorber
- Classic rims with 25/59 mm tread tires
- Including 540 brushed motor
Tamiya Chassis Kit TT-02 SA, 4WD, 1:10, Kit- Scale: 1:10
- "SA-Line" Partially pre-assembled - ideal for beginners
- 27/67 mm slick tires, already glued to the rims
- Independent suspension with friction shock absorber
- 540 brushed motor included
Traxxas 4TEC 2.0 Drift Ford Mustang, green ARTR, 1:10- Officially licensed Mustang bodywork
- Electronic speed control XL-5 and Titan Drift 21T engine
- Digital High-Torque 2075 Servo
- Rear limited slip differential with 48 dp gearing
- Completely ball-bearing mounted with seal
- Three customizable drift profiles with app control: TSM Drift, TSM, Gyro
Tamiya Pan Car 1990 Mercedes-Benz C11, RWD, 1:10, Kit- Pan Car Chassis with Space Frame and FRP Plate
- 2WD rear-wheel drive with ball differential
- 3-point suspension
- CVA oil pressure shock absorber
- Unpainted 1990 Mercedes-Benz C 11 body made of Lexan
- 540 brushed motor included
Arrma Muscle Car Felony 6S BLX ARTR- Scale: 1:7
- Stunning resto-mod muscle car styling
- 3mm thick aluminum chassis
- Aerodynamic design
- Grip tires with stylish 5-spoke rims
- Spektrum DX3 remote control and Spektrum SR6110AT receiver with Active Vehicle Control
OfferSale
Kobotix Real Racer FPV Red, RTR, 1:28- Proportional control with 30 m radio range
- FPV camera with 1280 x 720 pixel resolution and 30 FPS
- Real-time video transmission via Wi-Fi to a smartphone (Android or iOS)
- 4WD all-wheel drive and drive stabilization via gyro
- LiPo battery for riding times of up to 25 minutes
- Includes FPV headset for smartphones
Tamiya Touring car 1973 Alpine A110 M-06, 1:10, Kit- Based on the M-06 chassis with rear-wheel drive and low center of gravity
- Double wishbone suspension
- Authentic wheels with 60D radial tires
- Unpainted 1973 Alpine A110 body made of Lexan with additional parts made of ABS
- Stickers including Jägermeister logos are included in delivery
- 540 brushed motor included
Kyosho Standard production car Fazer MK2 1957 Chevy Bel Air Coupe 1:10, ARTR- 1957 Chevy Bel Air Coupe in scale 1:10
- 550 G14L brushed motor and 60A regulator
- Fazer MK2 FZ02L chassis with all-wheel drive and low center of gravity
- Oil pressure shock absorbers, ball bearings and differentials front/rear
- Syncro KT-231P 2.4 GHz remote control included
- Suitable for Stickpack / Hardcase 6 cells NiMH 7.2 V or 2S LiPo 7.4 V batteries
Kyosho Touring car Fazer MK2 Mercdes Benz 300 SEL 6.3 ARTR, 1:10- True to original 1971 Mercedes-Benz 300 SEL 6.3 body with many add-on parts
- 550 G14L brushed motor and 60A regulator
- Fazer MK2 FZ02L chassis with all-wheel drive and low center of gravity
- Oil pressure shock absorbers, ball bearings and differentials front/rear
- Vintage Touring Car (VTC) tires on Rostyle rims
- Syncro KT-231P+ 2.4 GHz remote control included
Arrma Race truck Infraction BLX 3S, Gold 1:8, ARTR- Powerful 3660 3900Kv brushless motor with Spektrum company 100A regulator
- Top speeds of over 100 km/h possible with high-speed sprocket (included)
- Installed spectrum electronics with smart technology and AVC traction control
- Allroad dBoots Hoons Elevens tires for balanced grip on all surfaces
- Adjustable oil pressure shock absorbers
- Includes Spektrum DX3 Smart DSMR transmitter with SR6200A receiver
HPI Drift RS4 Sport 3 BMW M3 DriftWorks 4WD, 1:10, RTR- Four wheel drive with Firebolt 15T brushed motor
- BMW E30 M3 Drifworks body & Work Emotion XC8 wheels
- Equipped with ball bearing and oil pressure shock absorber
- One piece tub chassis
- TF-50 2.4 GHz FHSS RC system
- 7.2 V 2000 mAh NiMH battery and USB charger included
Tamiya Touring car Citroen DS MB-01 Kit, 1:10- MB-01 chassis, can be built as FWD or RWD model
- Detailed Lexan body (unpainted)
- Independent suspension with friction shock absorber
- Classic rims with 25/59 mm tread tires
- Including 540 brushed motor
Tamiya Touring car Mercedes CLK-GTR TC-01 Kit, 1:10- Low TC-01 chassis with low center of gravity
- Detailed Lexan body (unpainted)
- Exterior mirrors made from separate plastic parts
- Independent suspension with horizontal oil-pressure shock absorbers
- All-wheel drive via cardan shaft and oil-filled differentials
- Transverse battery compartment (139 x 47 x 25 mm), also suitable for hardcase batteries
Tamiya Touring car Porsche 911 Carrera RSR 2.8 BT-01 Kit, 1:10- 2WD BT-01 chassis, can be set up as MR/FR
- Detailed Porsche 911 Carrera RSR 2.8 Lexan body (unpainted)
- Exterior mirrors made from separate plastic parts
- Independent suspension with friction shock absorber
- Slick tires with foam inserts (tire width: 26 mm front, 30 mm rear)
- Includes 540 brushed motor and controller
Kyosho Touring car Fazer MK2 Chevy C10 Fleetside 1966 ARTR 1:10- 1966 Chevrolet C10 Fleetside in scale 1:10
- 550 G14L brushed motor and 60A regulator
- Fazer MK2 FZ02L chassis with all-wheel drive and low center of gravity
- Oil pressure shock absorbers, ball bearings and differentials front/rear
- Syncro KT-231P+ 2.4 GHz remote control included
- Suitable for Stickpack / Hardcase 6 cells NiMH 7.2 V or 2S LiPo 7.4 V batteries
Arrma Race truck Infraction BLX 3S, Turquoise 1:8, ARTR- Powerful 3660 3900Kv brushless motor with Spektrum company 100A regulator
- Top speeds of over 100 km/h possible with high-speed sprocket (included)
- Installed Spectrum Electronics with Smart Technology and AVC Traction Control
- Allroad dBoots Hoons Elevens tires for balanced grip on all surfaces
- Adjustable oil pressure shock absorbers
- Includes Spektrum DX3 Smart DSMR transmitter with SR6200A receiver
Tamiya Touring car MB 190E 2.5 EVO II TT-01E Kit, 1:10- 4WD all-wheel drive via cardan shaft
- Detailed, unpainted polycarbonate body with add-on parts
- Mercedes-Benz star and radiator grille in chrome-plated plastic
- Independent front/rear suspension
- 6-spoke rims with 26 mm slick tires
- Includes 540 brushed motor and controller
Kyosho Mini-Z MA020 Subaru Impreza WRC 2002 White, ARTR- Mini-Z Drift in 1:27 scale
- 130cc brushed motor with high torque
- Detailed Subaru Impreza WRC 2002 bodywork
- Ladder frame chassis with vertical steel plates and multi-link rigid axle
- Ball bearing drive train
- Includes Kyosho Syncro KT-531P remote control
HPI Touring car RS4 Sport 3 BMW M3 4WD, RTR, 1:10- Scale: 1:10
- All-wheel drive with cardan shaft
- Equipped with ball bearing and oil pressure shock absorber
- Detailed BMW M3 E30 Warsteiner body
- HPI Firebolt 15 turn 540 brushed motor with SC-3SWP2 speed controller
- 2.4 GHz remote control, 7.2 V 2000 mAh NiMH stick pack battery and charger included
Tamiya Touring car Toyota Supra (JZA80) BT-01 Kit, 1:10- New BT-01 chassis, can be set up as FF/MR/FR
- Detailed Lexan body (unpainted)
- Spoiler, lamp inserts and exterior mirrors made from separate plastic parts
- Independent suspension with friction shock absorber
- 10-spoke rims with tread tires
- Including 540 brushed motor
Traxxas Rally Ford Fiesta ST VXL 4WD Green, ARTR, 1:10- Brushless drive set with 3500 kV Velineon motor and VXL3S controller
- Equipped with «heavy-duty» upgrade set as standard (reinforced steering knuckles & drive shafts)
- Independent suspension with oil pressure shock absorbers
- Ball bearing drive train
- Licensed Ford Fiesta ST body with brackets without clips
- Including TQi 2.4 GHz remote control
Kyosho Touring car Fazer MK2 Chevy Chevelle Supercharged ARTR 1:10- TORX 10E 3652 4000KV brushless motor with 60A Brainz10v2 controller
- Detailed 1970 Chevelle body with additional add-on parts (can be optionally equipped with LEDs)
- Fazer MK2 FZ02L chassis with all-wheel drive and low center of gravity
- Oil-pressure shock absorbers, ball bearings and front/rear differentials
- VTA tires on Rostyle rims
- Syncro KT-231P+ 2.4 GHz remote control
Tamiya Rally VW Golf Mk2 GTI 16V, MF-01X, Kit, 1:10- MF-01X 4WD chassis for on-road and flat off-road tracks
- All-wheel drive with cone differentials and cardan shaft
- Independent suspension with double wishbone
- VW Golf GTI Mk2 Lexan body (unpainted)
- 239 mm M-Chassis Wheelbase
- Torque Tuned 540 brush motor included
Tamiya Rally Chassis XV-02 Pro, 4WD, 1:10, Kit- Chassis Kit the scale: 1:10
- All-wheel drive with mid-engine
- 39T and 40T differentials to adjust the drive balance
- Long aluminum oil shock absorber
- Polycarbonate chassis cover and wheel arch liners
- Rally block tires and rims included
Tamiya Touring car Toyota GR Supra GT500, TT-02 1:10, Kit- Rugged TT-02 chassis with all-wheel drive
- Detailed Lexan body (unpainted)
- Spoiler and exterior mirrors made of separate ABS parts
- Independent suspension with friction shock absorber
- 27/67 mm tires on spoke rims
- 540 brushed motor included
Traxxas Rally Ford Fiesta ST BL-2S 4WD Blue, ARTR, 1:10- Brushless drive set with 3300 kV motor and BL-2 s controller
- Equipped with «heavy-duty» upgrade set as standard (reinforced steering knuckles & drive shafts)
- Independent suspension with oil pressure shock absorbers
- Ball bearing drive train
- Licensed Ford Fiesta ST body with brackets without clips
- Including TQ 2.4 GHz remote control
Kyosho Motorcycle Honda NSR500 1991 Kit, 1:8- Rear wheel is driven by a chain, like the original
- Detailed driver figure
- Unique S.D.S.S. steering system tilts the front fork from side to side, while the link mechanism in the rider figure drops his waist into the bends
- Asymmetrical swingarm with one friction shock absorber
- Including Le Mans DM20 brushed motor
- Stand for setting up
Tamiya Touring car Chassis TA08 Pro 4WD Kit, 1:10- Mid-engine layout with all-wheel drive via two belts
- Oil-filled 37T TRF420 differentials
- TRF Bigbore oil pressure shock absorber
- 44 mm universal CVD front drive shafts
- «V-Shape» carbon-reinforced chassis
- Chassis kit without wheels, body and electronics