Controllers (167 results)
- +25
Hobbywing Programming card LED- Suitable for most Hobbywing controllers including EzRun, QuicRun, Flyfun V5, Platinum V1/V2 (check controller compatibility)
- +1
Hobbywing Brushless controller Skywalker V2 120A 3-8S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 11.1 V to 33.6 V
- Maximum continuous current: 120 A
- BEC: Integrated, Voltage: 5 V/6 V/7.4 V/8.4 V, Max. current: 20 A
- Dimensions: 83 mm x 35 mm x 22 mm, Weight: 117 g
- +7
Hobbywing Brushless controller Skywalker V2 20A 2-3S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 7.4 V to 12.6 V
- Maximum continuous current: 20 A
- BEC: Integrated, Voltage: 5 V, Max. current: 3 A
- Dimensions: 45 mm x 23 mm x 8 mm, Weight: 19 g
- +7
Hobbywing Brushless controller Skywalker V2 60A 3-6S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 11.1 V to 25.2 V
- Maximum continuous current: 60 A
- BEC: Integrated, Voltage: 5 V, Max. current: 7 A
- Dimensions: 73 mm x 30 mm x 12 mm, Weight: 68 g
- +27
Hobbywing Brushed controller Quicrun WP 1060 60A- Waterproof and dust protected
- Reliable hardware and software with overload protection
- Automatic gas calibration and parameterization via jumper
- Maximum continuous current: 60 A
- BEC: Integrated, Voltage: 6 V, Current max: 3 A
- Dimensions: 32 mm x 37 mm x 18 mm, Weight: 39 g
- +2
Hobbywing Brushless controller QuicRun WP10BL120 G2 120A, 2-4S- Suitable for brushless sensorless 3650 - 3660 motors with 4 mm connector
- Ideal for on- & off-road models in 1:10 scale
- Operating voltage from: 7.2 V up to 16.8 V, suitable for 2-4S LiPo batteries
- Maximum continuous current: 120 A
- BEC: Integrated, voltage: 6 V/7.4 V, current intensity max.: 5 A
- Dimensions: 52.8 mm x 39.8 mm x 38.2 mm, Weight: 119 g
- +7
Hobbywing Programming module Multifunction LCD Program Box Pro- High-contrast display with a screen diagonal of 2.8"
- Saving and loading controller settings
- Built-in battery tester for 1-8S batteries
- Simple operation via scroll wheel
- Supported ESCs: XERUN (from V 2.0), EZRUN (from V 2.0), Platinum, Seaking Pro
- Compatible with the HW Link V2 app (iOS and Android)
- +8
Hobbywing Brushless controller Skywalker V2 50A 3-6S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 11.1 V to 25.2 V
- Maximum continuous current: 50 A
- BEC: Integrated, Voltage: 5 V, Max. current: 6 A
- Dimensions: 73 mm x 30 mm x 12 mm, Weight: 68 g
- +1
Hobbywing Brushless controller Skywalker V2 15A 2-3S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 7.4 V to 126 V
- Maximum continuous current: 15 A
- BEC: Integrated, Voltage: 5 V, Max. current: 2 A
- Dimensions: 38 mm x 17 mm x 5 mm, Weight: 10 g
- +1
Hobbywing Brushless controller Platinum Pro V5 80A 3-8S- 16 adjustable parameters, including 4 flight modes (Fixed Wing, Helikopter External Governor, Elf Governor, Store Governor)
- Supports several data protocols e.g. Mikado VBar System, Futaba S.BUS2
- Includes data recording, can be called up on a smartphone thanks to Bluetooth
- Integrated 8A S-BEC with adjustable voltage (5 - 12 V)
- Suitable for operation with 3-8S LiPo batteries
- Dimensions: 60.5 mm x 33 mm x 17.6 mm, Weight: 77.5 g
- +3
Hobbywing Controller FlyFun V5 110A 6-14S OPTO- Solid construction with aluminum heat sink
- High efficiency ensures long flight times
- «Driving Efficiency Optimization (DEO)" Technology
- Smooth and prompt response
- 4 different brake modes including thrust reversal
- Setting options: Braking effect 8-fold, soft start (normal/soft/very soft), LiPo undervoltage protection (off/2.7-3.8 V) and timing (0 to 30°).
- +3
Hobbywing Brushless controller FlyFun 10A, 2-4S, BEC- Ideal for aircraft in the 300g class
- Permanently loadable with 10 amps
- Compatible batteries: 2-4S LiPo, 5-12 cells NiMH
- Programmable via the stick position on the transmitter and LED programming card
- BEC: Integrated, Voltage: 5 V, Max. current: 1 A
- Dimensions: 38 mm x 18 mm x 6 mm, Weight: 10 g
- +3
Hobbywing Brushless controller Xerun XR8 Plus G2S 200A, 2-6S- 5 selectable profiles for all 1/8 RC car racing
- Up to 30 different parameters adjustable
- Operating voltage from: 7.4 V to 25.2 V
- Maximum continuous current: 200 A
- BEC: Integrated, voltage: 6 V/7.4 V/8.4 V, current intensity max.: 6 A
- Dimensions: 56.1 mm x 42.1 mm x 38.5 mm, Weight: 122 g
- +3
Jeti Brushless controller MEZON 120 120A, 2-8S, S-BEC- Compatible with Duplex EX telemetry system
- Data analysis possible directly on Jeti DC/DS transmitters
- Operating voltage from: 6 V to 35 V
- Maximum continuous current: 120 A
- BEC: Integrated, Voltage: 5 V/8 V, Max. current: 8 A
- Dimensions: 109 mm x 24 mm x 36 mm, Weight: 165 g
Also available in: - +1
Jeti Brushless controller MEZON EVO 85 OPTO 85A, 2-12S- EX telemetry capable (voltage, current, capacitance, etc.)
- F3A mode for acro flight models
- Operating voltage from: 6 V to 51 V
- Maximum continuous current: 85 A
- Optocoupler: Electrically isolated from the receiver
- Dimensions: 85 mm x 28 mm x 20 mm, Weight: 83 g
- +2
Hobbywing Brushless controller Platinum Pro V5 180A HV 6-14S- 16 adjustable parameters, including 4 flight modes (Fixed Wing, Helikopter External Governor, Elf Governor, Store Governor)
- Supports several data protocols e.g. Mikado VBar System, Futaba S.BUS2
- Includes data recording, can be called up on a smartphone thanks to Bluetooth
- Integrated 10A S-BEC with adjustable voltage (5 - 12 V)
- Suitable for operation with 6-14S LiPo batteries
- Dimensions: 100.6 mm x 45.5 mm x 26.1 mm, Weight: 250.6 g
- +1
Hobbywing Controller Seaking 30A V3- Waterproof to IP67 for use in water without further precautions
- Highly efficient water cooling for very good temperature control even at highest loads
- Firmware specially tuned for RC boats
- Receiver cable can be connected to the LED Program Box
- Operational safety due to undervoltage cutoff, overheating and signal loss protection
- Dimensions: 54.5 mm x 28.3 mm x 18.7 mm, Weight: 41 g
- +3
Jeti Programming card Advance Pro ProgCard- For adjustments and setting of controllers of the "Advance Plus" and "Advance Pro" series
- +3
Castle Creations Controller Talon 35- For 2S to 6S LiPo batteries
- Programmable
- Strong BEC
- Maximum continuous current: 35 A
- BEC: Integrated, Voltage: 5.5 V, Current max: 5 A
- Dimensions: 49 mm x 22.4 mm x 8.4 mm, Weight: 27.8 g
- +1
Castle Creations Controller Talon 15- For input voltages from 2S to 4S LiPo
- Provides 5.5 V output voltage for receiver and servos
- 3 A load capacity permanently, 8 A short-term
- Programmable with Castle Link USB adapter
- BEC: Integrated, Voltage: 5.5 V, Current max: 3 A
- Dimensions: 27.9 mm x 14.7 mm x 8.1 mm, Weight: 7.2 g
- +5
Jeti Brushless controller MEZON EVO 50 BEC 50A, 2-12S- EX telemetry capable (voltage, current, capacitance, etc.)
- F3A mode for acro flight models
- Operating voltage from: 6 V to 51 V
- Maximum continuous current: 50 A
- BEC: Integrated, Voltage: 5 V/6 V/7.4 V/8.4 V, Current max: 15 A
- Dimensions: 85 mm x 28 mm x 22 mm, Weight: 109 g
- +2
SaleYGE Controller Aureus 105 V2 6-12S LiPo- Six pre-programmed operating modes for quick and easy configuration
- Compatible Motor type: Brushless
- Operating voltage from: 5.5 V to 12 V
- Maximum continuous current: 105 A continuous / 170 A peak
- BEC: Integrated, voltage: 12 V, current intensity max.: 25 A
- Dimensions: 20 mm x 78 mm x 37 mm, Weight: 146 g
- +1
SaleYGE Controller Aureus 135 V2 6-12S LiPo- Six pre-programmed operating modes for quick and easy configuration
- Compatible Motor type: Brushless
- Operating voltage from: 5.5 V to 12 V
- Maximum continuous current: 135 A continuous / 230 A peak
- BEC: Integrated, voltage: 12 V, current intensity max.: 25 A
- Dimensions: 26 mm x 82 mm x 43.5 mm, Weight: 195 g
- +3
Hobbywing Controller Seaking 180A V3 2-6S, for boats- Waterproof 180 A brushless controller for boats
- Operation with 2-6S LiPo batteries possible
- Bec: 5 A
- Waterproof IP67
- Dimensions: 72 mm (L) x 48 mm (W) x 36.6 mm (H), weight: 207 g
- Water cooling connection diameter: Inside 3 mm / Outside 5.4 mm
- +3Hobbywing Controller FlyFun V5 110A 6-14S SBEC
- Scope of application: Aircraft/Helicopters
- Compatible Motor type: Brushless
- Maximum continuous current: 110 A
- BEC: Integrated, Voltage: 5.2 V/6 V/7.4 V, Current max: 10 A
- Dimensions: 92.7 mm x 45.6 mm x 27 mm, Weight: 180 g
- +1
Jeti Brushless controller MEZON EVO 70 BEC LMR 70A, 2-12S- EX telemetry capable (voltage, current, capacitance, etc.)
- F3A mode for acro flight models
- Operating voltage from: 6 V to 51 V
- Maximum continuous current: 70 A (30 seconds)
- BEC: Integrated, Voltage: 5 V/6 V/7.4 V/8.4 V, Current max: 15 A
- Dimensions: 83 mm x 26 mm x 18 mm, Weight: 85 g
- +1
Castle Creations Adapter Link Quick Connect- No need to reconnect
- Automatic switching
- With heat shrink tubing
- +5
Hobbywing Brushless controller FlyFun 20A V5 Series- Scope of application: Aircraft/Helicopters
- Compatible Motor type: Brushless
- Maximum continuous current: 20 A
- Maximum peak current: 30 A
- BEC: 5 V @ 2.5 A
- +3
Hobbywing Controller Seaking 120A V3- Waterproof to IP67 for use in water without further precautions
- Highly efficient water cooling for very good temperature control even at highest loads
- Firmware specially tuned for RC boats
- External programming port
- Operational safety due to undervoltage cutoff, overheating and signal loss protection
- Dimensions: 68.5 mm x 39.4 mm x 32 mm, Weight: 150 g
- +2
Hobbywing Brushless controller Seaking V3, 60A, 2-3S- Waterproof design according to IP67
- Special firmware for RC boats
- Operating voltage from: 7.4 V up to 12.6 V, suitable for 2-3S LiPo batteries
- Maximum continuous current: 60 A
- BEC: Integrated, Voltage: 6 V, Current max: 3 A
- Dimensions: 68 mm x 38.5 mm x 25.6 mm, Weight: 95 g
- +2
ROXXY Brushless controller Smart Control 45 MSB Telemetry, 2-6S- Scope of application: Aircraft/Helicopters
- Compatible Motor type: Brushless
- Maximum continuous current: 45 A
- BEC: Integrated, Voltage: 5 V/8 V, Current max: 3 A
- Dimensions: 70 mm x 32 mm x 10 mm, Weight: 67 g
- +1
SaleHobbywing Controller Seaking Pro 120A- Splash-proof
- With turbo timing function and integrated BEC
- Programmable via WiFi module, app and LCD box
- Operational safety due to undervoltage cutoff, overheating and signal loss protection
- Efficient cooling system
- Dimensions: 97 mm x 38 mm x 10 mm, Weight: 88 g
- +1
SaleKonect Controller Elite 1:8 RS8 200 Amp- Numerous protective functions: Undervoltage, overheating and polarity reversal
- 33 adjustable parameters and 3 integrated modes for 1/8 competition (track and terrain)
- 48-degree super boost and turbo timing
- Powerful BEC of 8 A (12 A peak) and adjustable BEC voltage of 6 or 7.4 V
- Data recording (temperature and maximum speed) can be restored after the run via the programming box
- Remote ESC switch-off function
- +1
Hobbywing Controller Pro 25A V4 3-6s BEC 7A- Scope of application: Aircraft/Helicopters
- Compatible Motor type: Brushless
- Maximum continuous current: 25 A
- BEC: Integrated, Voltage: 6 V/7.4 V, Current max: 3 A
- Dimensions: 47 mm x 22 mm x 10 mm, Weight: 27 g
- +1
SaleYGE Brushless controller Saphir 155 V2 4-8S- Six pre-programmed operating modes for quick and easy configuration
- Compatible Motor type: Brushless
- Operating voltage from: 5.5 V to 12 V
- Maximum continuous current: 155 A continuous / 250 A peak
- BEC: Integrated, voltage: 5.5 V, current intensity max.: 25 A
- Dimensions: 26 mm x 82 mm x 43.5 mm, Weight: 195 g
- +1
Castle Creations Capacitor Cap Pack 880 µF- Smooths battery voltage
- Reduces load on the ESC
- For helis, cars and airplanes
- Quick and easy installation
- +1
Surpass Hobby Programming card for brushless controller- Suitable for Surpass Hobby brushless controller 45A SP-KS-300001-10 and 60A SP-KS-300001-11
- +1
Hobbywing Motor tester Tunalyzer- A next generation engine tester and tuning tool
- Precise test results, Consistent and reliable
- 8 different auto test parameters
- 4 different manual test parameters
- Bluetooth support for using the HW-Link app
- Operating voltage: 6 - 16.8 V (2-4S LiPo)
- +1
Spektrum Brushless controller Company 150A V2 Smart- 150A maximum current
- Intelligent all-in-one telemetry
- Fast, powerful 32-bit ARM M4 processor
- Waterproof
- Aluminum heat sink for high efficiency
- Multiple options for easy programming
- +2
Hobbywing Brushless controller QuicRun WP8BL150 G2 150A, 3-6S- Suitable for brushless sensorless motors up to 4274 sizes (max 3000KV 4S / 2400KV 6S)
- Ideal for on- & off-road models in 1:8 scale
- Operating voltage from: 11.1 V up to 25.2 V, suitable for 3-6S LiPo batteries
- Maximum continuous current: 150 A
- BEC: Integrated, voltage: 6 V/7.4 V, current intensity max.: 6 A
- Dimensions: 60 mm x 48 mm x 40.4 mm, Weight: 169.5 g
- +1
Hobbywing Controller XRotor 40A (20x20) 6S 4in1- Scope of application: Multicopter
- Compatible Motor type: Brushless
- Maximum continuous current: 160 A
- BEC: without, Voltage: 0 V, Current max: 0 A
- Dimensions: 40 mm x 33 mm x 5 mm, Weight: 12 g
- +2
ROXXY Controller BL-Control 712 BEC- Scope of application: Aircraft/Helicopters
- Maximum continuous current: 12 A
- Motor timing adjustable in 3 steps
- Motor start-up adjustable to the values normal-medium-soft
- Brake can be switched on and off by programming
- Undervoltage cut-off adjustable to the values low-medium-high
- +8
Hobbywing Brushed controller QuicRun WP1080-G2 Crawler 80A, 2-3S- «Car Mode» allows switching the direction of rotation via a separate channel
- Water protected according to IP67 standard
- Operating voltage from: 7.2 V to 12.6 V
- Maximum continuous current: 80 A
- BEC: Integrated, Voltage: 6 V/7.4 V/8.4 V, Current max: 4 A
- Dimensions: 37.2 mm x 31.9 mm x 18.4 mm, Weight: 70.2 g
- +5
Hobbywing Programming module OTA Bluetooth Compatible with HW Link App- Input voltage: 5 - 12.6 V
- Compact design, Dimensions: 30 mm(L) x 25.5 mm (W) x 8.5 mm (H), Weight: 10.2 g
- Recording of data in real time (compatible controller required)
- Firmware update directly via the "HW Link" app
- Including reset button on the bottom of the module
- Suitable for selected controllers of the series: XERUN, EZRUN, PLATINUM and SEAKING
- +6
Spektrum Programming module for Avian/Company Smart controller- For checking, setting and saving the Spektrum Smart controller parameters
- Updateable firmware via USB via PC and setting of parameters via Spektrum SmartLink App
- +3
Tamiya Controller TBLE-04S 75A Brushed / Brushless Sensored- Suitable for vehicles with brushed or brushless sensored motors
- Operation with 6 cells NiMH (7.2 V) or 2S Life (6.6 V) battery possible
- Ideal for vehicles with limited space thanks to small dimensions: 41.5 mm (L) x 33.4 mm (W) x 18 mm (H)
- Maximum continuous current: 75A, supports motors from 23T
- BEC: Integrated, Voltage: 6 V, Current max: 1.5 A
- Overload and overheating protection
