RC electric drives (442 results)
- +25
Hobbywing Programming card LED- Suitable for most Hobbywing controllers including EzRun, QuicRun, Flyfun V5, Platinum V1/V2 (check controller compatibility)
- +4
Hobbywing Drive set Quicrun Fusion Pro Combo, Crawler, 2300 kV, 2-3S- 2in1: motor and controller combined in one
- FOC drive, ideal for crawlers in scale 1:10
- Strong torque even at slow speed
- Operating voltage: 7.2 - 12.6 V (2-3S LiPo)
- Replaces common 550 motors (37 mm diameter, 58 mm length)
- 4 pole brushless sensored motor with 2300 kV
- +1
Hobbywing Brushless controller Skywalker V2 120A 3-8S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 11.1 V to 33.6 V
- Maximum continuous current: 120 A
- BEC: Integrated, Voltage: 5 V/6 V/7.4 V/8.4 V, Max. current: 20 A
- Dimensions: 83 mm x 35 mm x 22 mm, Weight: 117 g
- +7
Hobbywing Brushless controller Skywalker V2 20A 2-3S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 7.4 V to 12.6 V
- Maximum continuous current: 20 A
- BEC: Integrated, Voltage: 5 V, Max. current: 3 A
- Dimensions: 45 mm x 23 mm x 8 mm, Weight: 19 g
- +7
Hobbywing Brushless controller Skywalker V2 60A 3-6S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 11.1 V to 25.2 V
- Maximum continuous current: 60 A
- BEC: Integrated, Voltage: 5 V, Max. current: 7 A
- Dimensions: 73 mm x 30 mm x 12 mm, Weight: 68 g
- +28
Hobbywing Brushed controller Quicrun WP 1060 60A- Waterproof and dust protected
- Reliable hardware and software with overload protection
- Automatic gas calibration and parameterization via jumper
- Maximum continuous current: 60 A
- BEC: Integrated, Voltage: 6 V, Current max: 3 A
- Dimensions: 32 mm x 37 mm x 18 mm, Weight: 39 g
- +2
Hobbywing Brushless controller QuicRun WP10BL120 G2 120A, 2-4S- Suitable for brushless sensorless 3650 - 3660 motors with 4 mm connector
- Ideal for on- & off-road models in 1:10 scale
- Operating voltage from: 7.2 V up to 16.8 V, suitable for 2-4S LiPo batteries
- Maximum continuous current: 120 A
- BEC: Integrated, voltage: 6 V/7.4 V, current intensity max.: 5 A
- Dimensions: 52.8 mm x 39.8 mm x 38.2 mm, Weight: 119 g
- +7
Hobbywing Programming module Multifunction LCD Program Box Pro- High-contrast display with a screen diagonal of 2.8"
- Saving and loading controller settings
- Built-in battery tester for 1-8S batteries
- Simple operation via scroll wheel
- Supported ESCs: XERUN (from V 2.0), EZRUN (from V 2.0), Platinum, Seaking Pro
- Compatible with the HW Link V2 app (iOS and Android)
- +20
Velleman Brushed motor 280 6 V, 14500 rpm- Dimensions: 30.5 mm (L) x 23.8 mm (Ø)
- Shaft diameter: 2 mm
- Idle speed: 14500 rpm
- Power at maximum efficiency : 6 W
- +8
Hobbywing Brushless controller Skywalker V2 50A 3-6S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 11.1 V to 25.2 V
- Maximum continuous current: 50 A
- BEC: Integrated, Voltage: 5 V, Max. current: 6 A
- Dimensions: 73 mm x 30 mm x 12 mm, Weight: 68 g
- +1
Hobbywing Brushless controller Skywalker V2 15A 2-3S- Equipped with DEO (Driving Efficiency Optimization) technology to improve throttle response and reduce regulator temperature
- Integrated 32-bit microprocessor
- Operating voltage from: 7.4 V to 126 V
- Maximum continuous current: 15 A
- BEC: Integrated, Voltage: 5 V, Max. current: 2 A
- Dimensions: 38 mm x 17 mm x 5 mm, Weight: 10 g
- +1
Hobbywing Brushless controller Platinum Pro V5 80A 3-8S- 16 adjustable parameters, including 4 flight modes (Fixed Wing, Helikopter External Governor, Elf Governor, Store Governor)
- Supports several data protocols e.g. Mikado VBar System, Futaba S.BUS2
- Includes data recording, can be called up on a smartphone thanks to Bluetooth
- Integrated 8A S-BEC with adjustable voltage (5 - 12 V)
- Suitable for operation with 3-8S LiPo batteries
- Dimensions: 60.5 mm x 33 mm x 17.6 mm, Weight: 77.5 g
- +2
SaleKonect Brushless drive set 4274 2200Kv RS8 Elite Motor K8- Numerous protective functions: Undervoltage, overheating and polarity reversal
- 33 adjustable parameters and 3 integrated modes for 1/8 competition (track and terrain)
- 48-degree super boost and turbo timing
- Powerful 8 A BEC (12 A tip) and BEC voltage adjustable from 6 to 7.4 V
- Data recording (temperature and maximum speed) can be restored after the run via the programming box
- Remote ESC switch-off function
- +3
Hobbywing Brushless drive set WP16BL30 Combo 2435SL 6500KV G3 2S- Suitable for off-road and on-road models in 1:16 and 1:18 scale
- Designed for operation with 2S LiPo or 6-cell NiMH batteries
- Waterproof WP16BL30 regulator with 1A, 6 V Bec
- 6500kV 2436 4-pole brushless sensorless motor with 2 mm motor shaft
- Simple programming via the «Set» button on the controller or optional LED programming box
- Proportional brake with adjustable maximum braking force and automatic brake
- +1
Castle Creations Brushless drive set Mamba X 1406-5700 KV 2-3S, 1:10- Motor with 5700 KV
- Ideal for models weighing up to 2.3 kg
- Operation with 2S and 3S LiPo batteries
- Integrated BEC with 5.5 to 8 V output voltage
- Tuning options thanks to data logger and Castle Link
- +2
Hobbywing Brushless drive set WP 10BL120 G2 3660SL-3700KV Combo 1:10- Ideal for off-road and on-road models in 1:10 scale
- Suitable for operation with 2-3S LiPo batteries
- Waterproof to IP67 standard
- 3700kV 3660 4-pole brushless sensorless motor with 5 mm motor shaft
- WP 10BL120 G2 regulator with 5A Bec (6 V / 7.4 V adjustable)
- Battery plug: XT60
- +1
SaleHobbywing Brushless Sensored Motor Xerun DRX 3662SD 6500 kV- Dimensions: 63 mm (L) x 36 mm (Ø)
- Shaft diameter: 5 mm
- Idling speed per volt: 6500 kV
- Open housing design ensures the necessary heat dissipation
- Ideal for drag racing
- Dual sensor design for optimum cabling in the model
- +1
ROXXY Motor BL Outrunner 4250/05 1000 KV- High efficiency
- Smooth running due to precision ball bearings
- Mounting possible on both sides
- +3
Hobbywing Controller FlyFun V5 110A 6-14S OPTO- Solid construction with aluminum heat sink
- High efficiency ensures long flight times
- «Driving Efficiency Optimization (DEO)" Technology
- Smooth and prompt response
- 4 different brake modes including thrust reversal
- Setting options: Braking effect 8-fold, soft start (normal/soft/very soft), LiPo undervoltage protection (off/2.7-3.8 V) and timing (0 to 30°).
- +3
Hobbywing Brushless controller FlyFun 10A, 2-4S, BEC- Ideal for aircraft in the 300g class
- Permanently loadable with 10 amps
- Compatible batteries: 2-4S LiPo, 5-12 cells NiMH
- Programmable via the stick position on the transmitter and LED programming card
- BEC: Integrated, Voltage: 5 V, Max. current: 1 A
- Dimensions: 38 mm x 18 mm x 6 mm, Weight: 10 g
- +3
Hobbywing Brushless controller Xerun XR8 Plus G2S 200A, 2-6S- 5 selectable profiles for all 1/8 RC car racing
- Up to 30 different parameters adjustable
- Operating voltage from: 7.4 V to 25.2 V
- Maximum continuous current: 200 A
- BEC: Integrated, voltage: 6 V/7.4 V/8.4 V, current intensity max.: 6 A
- Dimensions: 56.1 mm x 42.1 mm x 38.5 mm, Weight: 122 g
- +2
Hobbywing Brushless Sensored Motor Xerun V10 G4R 17.5T 3150kV- Dimensions: 51.3 mm (L) x 35.8 mm (Ø)
- Shaft diameter: 3.17 mm
- Idling speed per volt: 3150 kV
- Quiet motor with long service life
- Weight- and cooling-optimized housing
- Finely adjustable mechanical timing
Also available in: - +3
Jeti Brushless controller MEZON 120 120A, 2-8S, S-BEC- Compatible with Duplex EX telemetry system
- Data analysis possible directly on Jeti DC/DS transmitters
- Operating voltage from: 6 V to 35 V
- Maximum continuous current: 120 A
- BEC: Integrated, Voltage: 5 V/8 V, Max. current: 8 A
- Dimensions: 109 mm x 24 mm x 36 mm, Weight: 165 g
Also available in: - +1
Jeti Brushless controller MEZON EVO 85 OPTO 85A, 2-12S- EX telemetry capable (voltage, current, capacitance, etc.)
- F3A mode for acro flight models
- Operating voltage from: 6 V to 51 V
- Maximum continuous current: 85 A
- Optocoupler: Electrically isolated from the receiver
- Dimensions: 85 mm x 28 mm x 20 mm, Weight: 83 g
- +1
SaleEP Brushless drive set Sport 3D 4-5S 4120-500 KV, 80 A- Propulsion set consisting of EP Premium 4120-500KV motor, Aer-80A speed controller and APC E 15x8 propeller
- Suitable for aerobatics and 3D models
- BEC: 6 A, 5.5 V
- Dimensions motor: 49.8 x 51.8 mm, shaft diameter: 6 mm, weight: 290 g
- Controller dimensions: 67 x 32 x 14 mm, weight: 65 g
- Recommended battery: 4-5S LiPo
- +1
ROXXY Motor BL Outrunner 3548/06 700 KV- High efficiency
- Smooth running due to precision ball bearings
- Mounting possible on both sides
- +2
Hobbywing Brushless controller Platinum Pro V5 180A HV 6-14S- 16 adjustable parameters, including 4 flight modes (Fixed Wing, Helikopter External Governor, Elf Governor, Store Governor)
- Supports several data protocols e.g. Mikado VBar System, Futaba S.BUS2
- Includes data recording, can be called up on a smartphone thanks to Bluetooth
- Integrated 10A S-BEC with adjustable voltage (5 - 12 V)
- Suitable for operation with 6-14S LiPo batteries
- Dimensions: 100.6 mm x 45.5 mm x 26.1 mm, Weight: 250.6 g
- +1
Hobbywing Brushless drive set AXE Plus R3 Combo 2300 kV 2-3S- Stronger performance thanks to FOC technology (Field-Oriented-Control)
- Drag brake adjustable up to 200% for unparalleled holding power on slopes
- Super BEC with max. 6 A and three voltage levels for using different servos
- The controller has a built-in Bluetooth module for wireless programming
- Optimized for sensitive power delivery
- Waterproof and dustproof to IP67 standard
- +1
Hobbywing Brushless motor Xerun 4268SD G3 On-Road 2800kV- Dimensions: 67.8 mm (L) x 42 mm (Ø)
- Shaft diameter: 5 mm
- Suitable for operation with 2-4S LiPo batteries (7.4 - 16.8 V)
- Number of poles: 4
- Low cogging torque
- Adjustable timing: 20-40
- +1
Hobbywing Brushless Sensorless Motor QuicRun 2030SL 5000kV G2- Dimensions: 31 mm (L) x 20 mm (Ø)
- Shaft diameter: 2 mm
- Idling speed per volt: 5000 kV
- Excellent protection against dust, sand etc.
- Designed for operation with 2S LiPo batteries
- Ideal for RC vehicles on a scale of 1:18 and 1:16
- +4
Hobbywing Brushless drive set WP 10BL120 G2 3660SL-3150KV Combo 1:10- Ideal for off-road and on-road models in 1:10 scale
- Suitable for operation with 2-3S LiPo batteries
- Waterproof to IP67 standard
- 3150kV 3660 4-pole brushless sensorless motor with 5 mm motor shaft
- WP 10BL120 G2 regulator with 5A Bec (6 V / 7.4 V adjustable)
- Battery plug: XT60
- +2
Hobbywing Brushless drive set AXE Plus R3 Combo 2100 kV 2-6S- More power thanks to FOC technology
- Drag brake adjustable up to 200% for unparalleled holding power on slopes
- Super BEC with max. 6 A and three voltage levels for using different servos
- Motor with minimal cogging torque and smooth starting behavior
- Optimized for sensitive power delivery
- Waterproof and dustproof to IP67 standard
- +5
Traxxas Brushed motor Titan 550 Reverse 21T, 14 V- Dimensions: 57 mm (L) x 38 mm (Ø)
- Shaft diameter: 3.18 mm
- 21T, Idling speed per volt: 1870 kV
- Operating voltage: 7.2 - 14.4 V
- Integrated fan
- Reverse direction of rotation
- +1
Hobbywing Controller Seaking 30A V3- Waterproof to IP67 for use in water without further precautions
- Highly efficient water cooling for very good temperature control even at highest loads
- Firmware specially tuned for RC boats
- Receiver cable can be connected to the LED Program Box
- Operational safety due to undervoltage cutoff, overheating and signal loss protection
- Dimensions: 54.5 mm x 28.3 mm x 18.7 mm, Weight: 41 g
- +1
Axial Brushed motor 540 20T- Dimensions: 54 mm (L) x 35.5 mm (Ø)
- Shaft diameter: 3.17 mm
- 20T Idling speed per volt: 2900 kV
- With cable and 4 mm plug
- +3
Jeti Programming card Advance Pro ProgCard- For adjustments and setting of controllers of the "Advance Plus" and "Advance Pro" series
- +2
Hobbywing Brushless motor Xerun 4268SD G3 Off-Road 2200kV- Dimensions: 67.8 mm (L) x 42 mm (Ø)
- Shaft diameter: 5 mm
- Suitable for operation with 2-6S LiPo batteries (7.4 - 25.2 V)
- Number of poles: 4
- Low cogging torque
- Adjustable timing: 20-40
- +3
Castle Creations Controller Talon 35- For 2S to 6S LiPo batteries
- Programmable
- Strong BEC
- Maximum continuous current: 35 A
- BEC: Integrated, Voltage: 5.5 V, Current max: 5 A
- Dimensions: 49 mm x 22.4 mm x 8.4 mm, Weight: 27.8 g
- +1
Hobbywing Brushless drive set AXE Plus R3 Combo 4274SD 2000 kV 2-6S- Super Internal BEC with a max. output current of 15 A
- Dual external control channels with real-time adjustment of parameters
- Built-in data logging function, easy to obtain the power operating status
- Compatibility with the AXE R2 motor
- Widely applicable 6S high-power crawler ESC
- Built-in Bluetooth for connecting to the mobile app
- +2
ROXXY Brushless motor BL Outrunner C28-34-850 KV- Dimensions: 32 mm (L) x 28 mm (Ø)
- Motor type: Brushless
- Idling speed per volt: 850 kV
- +1
Castle Creations Controller Talon 15- For input voltages from 2S to 4S LiPo
- Provides 5.5 V output voltage for receiver and servos
- 3 A load capacity permanently, 8 A short-term
- Programmable with Castle Link USB adapter
- BEC: Integrated, Voltage: 5.5 V, Current max: 3 A
- Dimensions: 27.9 mm x 14.7 mm x 8.1 mm, Weight: 7.2 g
- +6
Hobbywing Brushless drive set Quicrun Fusion SE 1800 kV, Crawler- 2in1 motor and controller combined in one
- Strong torque even at slow speed
- Waterproof and dustproof
- Gage speed: 1800 kV, max. current: 40 A
- Operating voltage: 7.2 - 12.6 V (2-3S LiPo or 6-9 cells NiMH)
- Bec: 4 A at 6 V / 7.4 V (adjustable)
- +1
SaleROXXY Motor BL Outrunner 2220/15 1780 KV- High efficiency
- Smooth running due to precision ball bearings
- Mounting possible on both sides
- +5
Jeti Brushless controller MEZON EVO 50 BEC 50A, 2-12S- EX telemetry capable (voltage, current, capacitance, etc.)
- F3A mode for acro flight models
- Operating voltage from: 6 V to 51 V
- Maximum continuous current: 50 A
- BEC: Integrated, Voltage: 5 V/6 V/7.4 V/8.4 V, Current max: 15 A
- Dimensions: 85 mm x 28 mm x 22 mm, Weight: 109 g
- +1
ROXXY Motor BL Outrunner 2216/18 2570 KV- High efficiency
- Smooth running due to precision ball bearings
- Mounting possible on both sides
