Dieser Shop benötigt aktiviertes JavaScript.
Decoders (44 results) ESU Digital decoder LokPilot 5 Basic, NEM652 DCC DCC decoder with 8-pin NEM652 interface 14 to 128 speed steps Supports RailComPlus Max. 0.9 A continuous current Variable adjustable PWM clock frequency from 10kHz to 50kHz All outputs are protected against overload ESU Digital decoder LokPilot 5, 8-pin NEM652 Multiprotocol Can be used on DC and AC railroads Supported data formats: DCC, MM, SX, M4 Supports RailComPlus Max. 1.5 A continuous current, variably adjustable PWM clock frequency from 10kHz to 50kHz 10 amplified function outputs with 250mA output current each 8-pin NEM652 interface ESU Digital decoder SwitchPilot 3 Servo DCC/MM Can control up to 8 servos from the RC model making range Multi-protocol capable, can be used with Märklin, Motorola and DCC-capable control centers RailCom-capable Can also be used standalone without control center, up to 16 buttons can be connected for direct control of the servos 8-fold servo decoder Directly programmable on the device with buttons and OLED display ESU Digital decoder LokSound 5 Fx, NEM 652 Multiprotocol LokSound 5 decoder can be used on analog DC and AC railroads Supported data formats: DCC, Motorola, Selectrix, M4 Can play up to 12 sound channels simultaneously Class-D audio power amplifier with up to 3W output power for 4 - 32 Ω speakers 128 Mb sound memory 8-pin interface according to NEM652 ESU Digital decoder LokSound 5, 21MTC Multiprotocol LokSound 5 decoder can be used on analog DC and AC railroads Supported data formats: DCC, Motorola, Selectrix, M4 Can play up to 12 sound channels simultaneously Class-D audio power amplifier with up to 3W output power for 4 - 32 Ω speakers 1.5 A motor control with adjustable PWM clock frequency from 10 kHz to 50 kHz 21MTC interface according to NEM660, Including loudspeaker 11 x 15 mm ESU Digital decoder SwitchPilot 3 Plus DCC/MM Can switch conventional double-coil point machines, light signals, magnetic uncouplers, lamps and other stationary loads Multi-protocol capable, can be used with Märklin, Motorola and DCC-capable control centers RailCom-capable 16 transistor outputs 8-fold magnetic particle decoder Directly programmable on the device with buttons and OLED display ESU Digital decoder LokPilot 5 Basic, 21MTC NEM660 DCC DCC decoder with 21MTC NEM660 interface 14 to 128 speed steps Supports RailComPlus Max. 0.9 A continuous current, variably adjustable PWM clock frequency from 10kHz to 50kHz 8 logic level outputs at the interface All outputs are protected against overload ESU Digital decoder LokPilot 5, PluX22 NEM658 DCC Suitable for DC systems Supports RailComPlus Max. 1.5 A continuous current, variably adjustable PWM clock frequency from 10kHz to 50kHz 10 amplified function outputs with 250mA output current each Dimensions: 21.4 x 15.5 x 4.5 mm PluX22 NEM658 interface ESU Digital decoder LokPilot 5, 8-pin NEM652 DCC Suitable for DC systems Supports RailComPlus Max. 1.5 A continuous current, variably adjustable PWM clock frequency from 10kHz to 50kHz 10 amplified function outputs with 250mA output current each Dimensions: 21.4 x 15.5 x 4.5 mm 8-pin NEM652 interface ESU Digital decoder LokSound 5, NEM 652 Multiprotocol LokSound 5 decoder can be used on analog DC and AC railroads Supported data formats: DCC, Motorola, Selectrix, M4 Can play up to 12 sound channels simultaneously, including speaker 11x15mm Class-D audio power amplifier with up to 3W output power for 4 - 32 Ω speakers 1.5 A motor control with adjustable PWM clock frequency from 10 kHz to 50 kHz 8-pin interface according to NEM652 ESU Digital decoder SignalPilot DCC/MM SignalPilot can be used under DCC with RailComPlus and Motorola 16 independent function outputs (push/pull) Each output is loadable with 250 mA Connection with removable terminal blocks Dimensions: 86 mm x 86 mm x 25 mm Software can be updated by means of ESU LokProgrammer ESU Digital decoder LokPilot 5, 21MTC NEM660 Multiprotocol Can be used on DC and AC railroads Supported data formats: DCC, MM, SX, M4 Supports RailComPlus Max. 1.5 A continuous current, variably adjustable PWM clock frequency from 10kHz to 50kHz 10 amplified function outputs with 250mA output current each 21MTC NEM660 interface ESU Digital decoder LokPilot 5, 21MTC NEM660 DCC Suitable for DC systems Supports RailComPlus Max. 1.5 A continuous current, variably adjustable PWM clock frequency from 10kHz to 50kHz 10 amplified function outputs with 250mA output current each Dimensions: 21.4 x 15.5 x 4.5 mm 21MTC NEM660 interface Märklin Sound Decoder mSD3 PluX22 Diesel locomotive For retrofitting locomotives with PluX22 interface Preset sound of a diesel locomotive 21-pin interface according to NEM 658 Supports digital formats mfx, MM1, MM2, DCC and RailCom Complete integration into the Märklin digital system Additional physical outputs ESU Digital decoder LokPilot 5, 21MTC MKL Multiprotocol Can be used on DC and AC railroads Supported data formats: DCC, MM, SX, M4 Supports RailComPlus Max. 1.5 A continuous current, variably adjustable PWM clock frequency from 10kHz to 50kHz 10 amplified function outputs with 250mA output current each 21MTC MKL interface ESU Professional test bench for digital decoder Supported interfaces: 6-pin EM 651, 8-pin NEM 652, 21MTC NEM660, PluX22, Next18 Locomotives without interface connector can be connected with single cable clamps Bell armature motor with flywheel mass is used in conjunction with direction LEDs to control the motor output LED monitor for testing the light functions For testing LokSound decoders, a 20 mm speaker is integrated Connection to the digital control center or the locomotive programmer by means of removable terminal block Sale
ESU ECoS Detector Extension Add-on module for ECoSDector, is supplied and controlled by it Transistor outputs are externally supplied with power 32 transistor outputs with 100mA output power each Maximum 1.5A output power of all outputs together Dimensions: 86 x 86 x 25 mm Märklin Digital decoder C-track Can be retrofitted to all C-track turnouts with electric drives Digital system: DCC; MFX; Motorola Connection via plug contacts Address 1 to 256 adjustable with coding switch Digital power supply can be taken directly from the traction current contact of the turnout ESU Digital decoder LokPilot 5, PluX22 NEM658 Multiprotocol Can be used on DC and AC railroads Supported data formats: DCC, MM, SX, M4 Supports RailComPlus Max. 1.5 A continuous current, variably adjustable PWM clock frequency from 10kHz to 50kHz 10 amplified function outputs with 250mA output current each PluX22 NEM658 interface ESU Digital decoder LokSound 5 Fx, 21MTC Multiprotocol LokSound 5 decoder can be used on analog DC and AC railroads Supported data formats: DCC, Motorola, Selectrix, M4 Can play up to 12 sound channels simultaneously Class-D audio power amplifier with up to 3W output power for 4 - 32 Ω speakers 128 Mb sound memory 21MTC interface according to NEM660 ESU Digital decoder LokSound 5, PluX22 Multiprotocol LokSound 5 decoder can be used on analog DC and AC railroads Supported data formats: DCC, Motorola, Selectrix, M4 Can play up to 12 sound channels simultaneously Class-D audio power amplifier with up to 3W output power for 4 - 32 Ω speakers 1.5 A motor control with adjustable PWM clock frequency from 10 kHz to 50 kHz PluX22 interface Märklin Digital decoder C-track Can be retrofitted for the C-track three-way turnout (24630) with electric drive Digital formats mfx, Motorola and DCC Connection via plug-in contacts, for Märklin and Trix C-track three-way turnouts Address adjustable with coding switch (Motorola format 1 to 320 / DCC format 1 to 511), optionally also adjustable at the programming track Is simply connected with plug-in contacts and can be addressed individually for each turnout Digital power supply can be taken directly from the traction current contact of the turnout Märklin Digital decoder S88 Link Connection option for s88 feedback modules Compatible with Centralstation 2 and 3 16 inputs for contact sensors Inputs can be specially configured for track diagram control panels Connections with elevator terminals ESU ECoSBoost, external booster 7A With power supply unit But ECoSBoost can do more than just amplify the traction current Amplifies the data signals coming from the digital center and outputs them to the track output Integrated feedback detectors: Railcom global Detector and M4 Feedback 7 A continuous current Dimensions: 180 x 76 x 40 mm Supported data formats (depending on the command station): NMRA DCC, Motorola, Selectrix, M4 ESU ECoS Detector feedback module ECoSDetector can monitor 16 track sections Inputs can be individually switched between switching input (ground input) or current sensor by jumper ECoSDetector can be used universally on all track systems Maximum 3A current load per feedback input 4 of the 16 feedbacks can be configured as RailCom feedbacks ("local detector") on request. Locomotive address detection Dimensions: 86 mm x 86 mm x 25 mm ESU ECoS Detector RC feedback module Direct bus connection to ECoSlink Operation with ECoS or Central Station possible 4 feedback detectors fixed configured as track occupation detectors (current sensors) 4 feedback units configured as RailCom feedback units ("local detector") Galvanic isolation of the feedback devices from the control panel Dimensions: 86 x 86 x 25 mm Märklin SoundDecoder mSD3 Steam locomotive, with wiring harness For converting Märklin/Trix H0 locomotives with built-in high-power motors or other DC motors Has a soldered wiring harness with an 8-pin NEM interface connector for retrofitting many locomotives with a corresponding NEM interface and locomotives with a lack of space Supports digital formats mfx, MM1, MM2 and DCC Preset sound of a steam locomotive ESU ECoS Detector Standard feedback module Direct bus connection to ECoSlink Operation with ECoS or Central Station possible 16 feedbacks as digital inputs (e.g. for switching tracks or reed contacts) Galvanic isolation of the feedback devices from the control panel Dimensions: 86 x 86 x 25 mm ESU Digital decoder SwitchPilot 3 DCC/MM Can switch conventional double-coil point machines, light signals, magnetic uncouplers, lamps and other stationary loads Multi-protocol capable, can be used with Märklin, Motorola and DCC-capable control centers RailCom-capable 8 transistor outputs 4-fold magnetic particle decoder Directly programmable on the device with buttons and OLED display ESU Digital decoder LokPilot 5, 21MTC MKL DCC Suitable for DC systems Supports RailComPlus Max. 1.5 A continuous current, variably adjustable PWM clock frequency from 10kHz to 50kHz 10 amplified function outputs with 250mA output current each Dimensions: 21.4 x 15.5 x 4.5 mm 21MTC MKL interface Märklin SoundDecoder mSD3 Diesel locomotive, with circuit board For converting Märklin/Trix H0 locomotives with built-in high-power motors or other DC motors Has a 21-pin interface and matching interface board for retrofitting analog and digital locomotives Supports digital formats mfx, MM1, MM2 and DCC Preset sound of a diesel locomotive Märklin SoundDecoder mSD3 Diesel locomotive, with wiring harness For converting Märklin/Trix H0 locomotives with built-in high-power motors or other DC motors Has a soldered wiring harness with an 8-pin NEM interface connector for retrofitting many locomotives with a corresponding NEM interface and locomotives with a lack of space Supports digital formats mfx, MM1, MM2 and DCC Preset sound of a diesel locomotive ESU L.net converter for ECoS L.Net converter allows the use of Loconet -compatible handheld controllers directly at your ECoS Integrates Loconet feedback modules for track occupation reporting into your ECoS system Loconet switch modules (e.g. turnout) can also be operated Supported data formats: DCC, Motorola, Selectrix and M4 Compatible with ECoS or CS1 "Reloaded ESU Digital decoder LokSound 5, 21MTC MKL Multiprotocol LokSound 5 decoder can be used on analog DC and AC railroads Supported data formats: DCC, Motorola, Selectrix, M4 Can play up to 12 sound channels simultaneously Class-D audio power amplifier with up to 3W output power for 4 - 32 Ω speakers 1.5 A motor control with adjustable PWM clock frequency from 10 kHz to 50 kHz 21MTC MKL interface ESU Professional Test Bench Extension for LokSound Decoder Extension for the ESU Profi test bench LED monitor with 12 LEDs directly displays the status of all possible physical function outputs 4 servos can be directly connected and tested Suitable for LokSound XL V4.0 and LokSound L V4.0 decoders Märklin Installation digital DKW turnout decoder C-track Rated size: H0 Digital system: DCC; MFX; Motorola For retrofitting a 24720 or Trix 62720 slim C Track double crossover turnout. Digital formats: mfx, Motorola and DCC The address can be set via coding switch (MM 1-320, DCC 1-511) as well as via CV (MM 1-320, DCC 1-2044) using a programming track. Can additionally control an optional turnout lantern
ESU Digital decoder LokPilot 5 Basic, NEM652 DCC
ESU Digital decoder LokPilot 5, 8-pin NEM652 Multiprotocol
ESU Digital decoder SwitchPilot 3 Servo DCC/MM
ESU Digital decoder LokSound 5 Fx, NEM 652 Multiprotocol
ESU Digital decoder LokSound 5, 21MTC Multiprotocol
ESU Digital decoder SwitchPilot 3 Plus DCC/MM
ESU Digital decoder LokPilot 5 Basic, 21MTC NEM660 DCC
ESU Digital decoder LokPilot 5, PluX22 NEM658 DCC
Märklin Decoder m 84 mfx-capable H0
ESU Digital decoder LokPilot 5, 8-pin NEM652 DCC
ESU Digital decoder LokSound 5, NEM 652 Multiprotocol
SaleMärklin SoundDecoder mSD3 Electric locomotive, with printed circuit board
ESU Digital decoder SignalPilot DCC/MM
ESU Digital decoder LokPilot 5, 21MTC NEM660 Multiprotocol
ESU Digital decoder LokPilot 5, 21MTC NEM660 DCC
Märklin Sound Decoder mSD3 PluX22 Diesel locomotive
ESU Digital decoder LokPilot 5, 21MTC MKL Multiprotocol
ESU Professional test bench for digital decoder
SaleESU ECoS Detector Extension
Märklin Digital decoder C-track
ESU Digital decoder LokPilot 5, PluX22 NEM658 Multiprotocol
ESU Digital decoder LokSound 5 Fx, 21MTC Multiprotocol
Faller Mini sound effect Dog barking, H0
ESU Digital decoder LokSound 5, PluX22 Multiprotocol
Märklin Digital decoder C-track
Märklin Digital decoder S88 Link
Märklin Decoder m 88 mfx-capable H0
Märklin Decoder m 83 mfx-capable H0
ESU ECoSBoost, external booster 7A With power supply unit
ESU ECoS Detector feedback module
ESU ECoS Detector RC feedback module
Märklin SoundDecoder mSD3 Steam locomotive, with wiring harness
ESU ECoS Detector Standard feedback module
ESU Digital decoder SwitchPilot 3 DCC/MM
ESU Digital decoder LokPilot 5, 21MTC MKL DCC
ESU L.net converter for ECoS
ESU Digital decoder LokSound 5, 21MTC MKL Multiprotocol
ESU Professional Test Bench Extension for LokSound Decoder
Märklin Installation digital DKW turnout decoder C-track