Filaments (338 results)
- +626
Creality Filament PETG, White, 1.75 mm, 1 kg- Diameter: 1.75 mm
- Weight: 1 kg
- Tensile strength: 49 MPa
- Inner diameter roller (hole): 53 mm
Also available in: - 0
eSun Filament PETG+ HS Black 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PETG
Also available in: - +92
eSun Filament PETG+ HS White 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PETG
Also available in: - +183
Creality Filament PETG Hyper Black, 1.75 mm, 1 kg- Enables speeds of up to 300 mm/s
- Waterproof and weather-resistant
- High toughness and impact resistance
- Excellent chemical resistance
- Highly transparent and translucent
- Print temperature: 190 - 260 °C
Also available in: - +2
SaleeSun Filament PLA Basic, white 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Suitable for decorations, concept models and rapid prototyping
- -31
eSun Filament PLA+ HS White 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PLA
Also available in: - +215
eSun Filament PLA+ HS Black 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PLA
Also available in: - +7
eSun Filament TPU-95A Black 1.75 mm 1 kg- TPU-95A 1 kg 1.75 mm White
- High printer compatibility
- Excellent layer adhesion
- Weight: 1 kg
Also available in: - +888
Creality Filament PETG, Black, 1.75 mm, 1 kg- Diameter: 1.75 mm
- Weight: 1 kg
- Tensile strength: 49 MPa
- Inner diameter roller (hole): 53 mm
Also available in: - +174
Creality Filament CR-PLA Black, 1.75 mm, 1 kg- Diameter: 1.75 mm
- Print temperature: 195 - 210 °C
- Weight: 1 kg
- Color: Black
Also available in: - +196
Creality Filament PETG, Transparent Blue, 1.75 mm, 1 kg- Diameter: 1.75 mm
- Weight: 1 kg
- Tensile strength: 49 MPa
- Inner diameter roller (hole): 53 mm
Also available in: - +35
eSun Filament PETG+ HS Orange 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PETG
Also available in: - +342
Creality Filament PETG, Gray, 1.75 mm, 1 kg- Diameter: 1.75 mm
- Weight: 1 kg
- Tensile strength: 49 MPa
- Inner diameter roller (hole): 53 mm
Also available in: - +271
Creality Filament PETG Hyper Transparent, 1.75 mm, 1 kg- Enables speeds of up to 300 mm/s
- Waterproof and weather-resistant
- High toughness and impact resistance
- Excellent chemical resistance
- Highly transparent and translucent
- Print temperature: 190 - 260 °C
Also available in: - -1
Creality Filament PLA Hyper RFID White 1.75 mm 1 kg- Excellent mechanical properties with remarkable tensile strength
- Supports both low and high speed applications
- Printing temperature: 190-230 °C, printing speed: 300 mm/s
- Detailed colour=White
- Integrated RFID recognition
- Diameter: 1.75 mm, weight: 1 kg
Also available in: - +10
SaleeSun Filament PLA Basic, green 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Recommended pressure temperature: 210230 °C
- +13
SaleeSun Filament eSun, Filament , PLA Basic, Blue 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Compatible with Bambu Lab AMS and common FDM printers
- +38
eSun Filament PETG+ HS Yellow 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PETG
Also available in: - +10
eSun Filament PLA+ HS Silver 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PLA
Also available in: - +10
NeweSun Filament PLA-Basic, Aqua 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Recommended temperature 210 - 230 °C and heating bed 45 - 60 °C
- +21
NeweSun Filament PLA-Basic, Pink 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Compatible with Bambu Lab AMS and common FDM printers
- +7
eSun Filament PLA+ HS Beige 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PLA
Also available in: - +103
eSun Filament PLA+ HS Fire red 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PLA
Also available in: - +20
SaleeSun Filament PLA Basic, beige 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- +47
Creality Filament PLA Hyper RFID Complexion 1.75 mm 1 kg- Excellent mechanical properties with remarkable tensile strength
- Supports both low and high speed applications
- Printing temperature: 190-230 °C, printing speed: 300 mm/s
- Detailed colour=Complexion
- Integrated RFID recognition
- Diameter: 1.75 mm, weight: 1 kg
Also available in: - +29
SaleeSun Filament PLA Basic, fire engine red 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Vacuum-sealed with desiccant for optimum quality
- +33
SaleeSun Filament PLA Basic, purple 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Environmentally friendly and low-odor material
- +3
NeweSun Filament PLA MT, black 1.75 mm 1 kg- Matt finish for models
- Easy to print PLA
- Low shrinkage during printing
- Good adhesion without warping
- Compatible with FDM printers
- Compatible with all common 1.75 mm FDM 3D printers
- +11
eSun Filament PETG+ HS Fire red 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PETG
Also available in: - +65
eSun Filament PLA+ HS Milky white 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PLA
Also available in: - +13
SaleeSun Filament PLA Basic, concrete gray 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- +114
eSun Filament ABS+ HS White 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal ABS
Also available in: - +1110
Creality Filament PLA Hyper Black, 1.75 mm, 1 kg- Better filament flow than PLA or PLA+
- Enables speeds of up to 600 mm/s
- Faster cooling of the filament
- Designed for High Precision
- Higher tensile strength than ABS
- Stronger material than Traditional PLA
Also available in: - +530
Creality Filament PETG, Transparent, 1.75 mm, 1 kg- Diameter: 1.75 mm
- Weight: 1 kg
- Tensile strength: 49 MPa
- Inner diameter roller (hole): 53 mm
Also available in: - +23
SaleeSun Filament PLA Basic, silver 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Low odour development and minimized stringing
- -99
Creality Filament PLA Hyper RFID Black 1.75 mm 1 kg- Excellent mechanical properties with remarkable tensile strength
- Supports both low and high speed applications
- Printing temperature: 190-230 °C, printing speed: 300 mm/s
- Detailed colour=Black
- Integrated RFID recognition
- Diameter: 1.75 mm, weight: 1 kg
Also available in: - +50
SaleeSun Filament PLA Basic, grape purple 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Coil weight of 1000 g
- +123
eSun Filament PETG-Matte White 1.75 mm 1 kg- Matt finish without plastic sheen
- High toughness and impact resistance
- Optimized for high-speed printing
- Easy processing, strong adhesion
- Ideal for functional components
Also available in: - +44
eSun Filament PETG+ HS Green 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PETG
Also available in: - +42
SaleeSun Filament PLA Basic, gray 1.75 mm 1 kg- Easy to print PLA
- Good adhesion during printing
- Clean, smooth surface quality
- For models and prototypes
- Compatible with FDM printers
- Vacuum-packed with desiccant for optimal storage
- +56
eSun Filament PLA+ HS Gold 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PLA
Also available in: - +66
NeweSun Filament PLA MT, brown 1.75 mm 1 kg- Matt finish for models
- Easy to print PLA
- Low shrinkage during printing
- Good adhesion without warping
- Compatible with FDM printers
- Weight 1.0 kg
- +38
eSun Filament PLA+ HS Light blue 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PLA
Also available in: - 0
eSun Filament PETG+ HS Grey 1.75 mm 1 kg- High-speed filament for fast printing speed
- Excellent layer adhesion
- High printer compatibility
- Better properties than normal PETG
Also available in: - +185
Creality Filament PLA Hyper RFID Gold 1.75 mm 1 kg- Excellent mechanical properties with remarkable tensile strength
- Supports both low and high speed applications
- Printing temperature: 190-230 °C, printing speed: 300 mm/s
- Detailed colour=Gold
- Integrated RFID recognition
- Diameter: 1.75 mm, weight: 1 kg
Also available in: - +23
NeweSun Filament PLA MT, olive green 1.75 mm 1 kg- Matt finish for models
- Easy to print PLA
- Low shrinkage during printing
- Good adhesion without warping
- Compatible with FDM printers
- Suitable for fused filament fabrication (FFF)
- +2
NeweSun Filament PETG-Basic, translucent 1.75 mm 1 kg- Translucent surface with gloss
- High toughness for functional parts
- Low shrinkage without warping
- Good impact and weather resistance
- Compatible with FDM printers
- +25
NeweSun Filament PLA+ HS, coral orange 1.75 mm 1 kg- For fast FDM printing
- Even material flow without clogging
- High strength and toughness
- Smooth surface with details
- Compatible with FDM printers
- FFF fusion coating technology
