Battery chargers (105 results)
- +59
Ctek Battery charger CT5 TIME TO GO- Display of the remaining charging time via LEDs
- Suitable for all types of lead batteries
- Connection via pole terminals or permanently installed plug connection
- +15
Einhell Automotive Battery charger CE-BC 4 M- Intelligent battery charger with microprocessor control
- For gel, AGM, maintenance-free and low-maintenance lead-acid batteries
- Optimal for seasonal vehicles with long standing times (convertible/bike)
- Protection class IP65: Dust-tight and protected against water jets
- Multi-stage charging cycle, microprocessor controlled and monitored
- Trickle charge function for a permanently ideal charge state
- +24
Ctek Battery charger XS 0.8- Suitable for lead-acid batteries
- Practical status LEDs
- Six-stage, fully automatic charging cycle
- Easy to use - connect and charge
- Insulation class IP65 (splash water and dust protected)
- +18
Ctek Battery charger MXS 10.0- Suitable for lead-acid batteries
- Practical status LEDs
- Eight-stage, fully automatic charging cycle
- Easy to use - connect and charge
- Insulation class IP65 (splash-proof and dust-proof)
- Charging cable 1 m
- +11
Einhell Automotive Battery charger CE-BC 10 M- Intelligent battery charger with microprocessor control
- For gel, AGM, maintenance-free and low-maintenance lead-acid batteries
- Optimal for seasonal vehicles with long standing times (convertible/bike)
- Protection class IP65: Dust-tight and protected against water jets
- Multi-stage charging cycle, microprocessor controlled and monitored
- Trickle charge function for a permanently ideal charge state
- +8
Ctek Battery charger CT5 Powersport- For 12 V batteries, max. 2.3 A
- Charging capacity: 27.6 W
- Compatible battery types: Lithium-Ion (Li-Ion); Lithium iron phosphate (LiFePo4); Lithium iron (Li-Fe); Lead gel; Absorbent Glass Mat (AGM); Lead acid
- Sparkless
- Reverse polarity protected
- Short circuit proof
- +5
Victron Battery charger Blue Smart with Bluetooth, IP22 12 V 30A- High efficiency of up to 94
- Adaptive 6-stage charging algorithm
- Storage mode for battery conservation
- Charging of lithium-ion batteries possible
- Protection against overheating, eleven LEDs for status display
- Protection class: IP22
- +3
HP Autozubehör Battery charger Smart 6+12 Volt- For 12 V; 6.0 V batteries, max. 4 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lead (Pb); Lead gel; Absorbent Glass Mat (AGM)
- +9
Victron Battery charger Energy BlueSmart 12 V 25A- For 12 V batteries, max. 25 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lithium iron phosphate (LiFePo4); Lead gel; Absorbent Glass Mat (AGM)
- +11
Victron Battery charger Energy BlueSmart IP22 12 V 20A- For 12 V batteries, max. 20 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lithium iron phosphate (LiFePo4); Lead gel; Absorbent Glass Mat (AGM)
- +9
Ctek Battery charger MXS 3.8- Suitable for lead-acid batteries
- Practical status LEDs
- Seven-stage, fully automatic charging cycle
- Easy to use - connect and charge
- Insulation class IP65 (splash water and dust protected)
- +6
Einhell Automotive Battery charger CE-BC 15 M- For 12 V batteries, max. 15 A
- Intelligent battery charger with microprocessor control
- Multi-stage charging cycle, microprocessor controlled and monitored
- 2in1: Charging and external starting with one device
- For gel, AGM, maintenance-free and low-maintenance lead-acid batteries
- Optimal for seasonal vehicles with long standing times (convertible/bike)
- +2
Victron Battery charger Blue Smart IP65 12 V 15 A with a CH plug- For 12 V batteries, max. 15 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lead acid
- Setup and configuration via Bluetooth Smart
- Lithium-ion battery mode and low-energy mode
- Ready for operation in extreme cold down to -30 °C
- +3
Ctek Battery charger CS ONE, 12 V, 8 A- For 12 V batteries, max. 8 A
- Charging capacity: 96 W
- Compatible battery types: Lithium iron phosphate (LiFePo4); Lead gel; Absorbent Glass Mat (AGM)
- Reconditioning program to restore discharged batteries and overhaul exhausted batteries
- Integrated safety functions protect vehicle and battery
- Additional functions can be enabled via Bluetooth using the CTEK app
- +2
AEG Automotive Battery charger LT 10.3- Intelligent 8-stage automatic charge cycle
- Microprocessor-controlled diagnosis, rescue, charging and maintenance function
- LED display and indicators
- Compatible with gel, AGM and lead-acid batteries
- Suitable for outdoor use
- +2
Victron Battery charger Energy Blue Smart IP22 12 V 15A- For 12 V batteries, max. 15 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lithium iron phosphate (LiFePo4); Lead gel; Absorbent Glass Mat (AGM)
- +10
Ctek Battery charger CT5 Start Stop- Ideal for vehicles with start/stop technology
- Suitable for all types of lead batteries
- Connection via pole terminals or permanently installed plug connection
- +3
Einhell Automotive Battery charger CC-BC 10 E- Suitable for lead-acid batteries
- Display of the current charging current
- Robust sheet steel housing
- Powerful pole clamps
- Reverse polarity and overload protection
- +6
Victron Battery charger Blue Smart IP65 12V 7A- For 12 V batteries, max. 7 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lithium iron phosphate (LiFePo4); Lead (Pb)
- +6
Einhell Automotive Battery charger CE-BC 5 M LiFePO4- Intelligent battery charger with microprocessor control
- For gel, AGM, maintenance-free and low-maintenance lead-acid batteries
- Especially suitable for lithium iron phosphate batteries
- Trickle charge function for a permanently ideal charge level
- Power supply mode for use as a power supply
- Protection class IP65: Dust-tight and protected against water jets
- +6
Victron Battery charger Blue Power IP22 12 V 30A- High efficiency of 93%
- 6-stage charging algorithm with microprocessor-controlled, adaptive battery management
- Practical storage mode; also charges LiFePO4 batteries
- Output current is reduced to a maximum of 50% of the nominal output in NIGHT or LOW mode
- 11 LEDs for status display
- Only suitable for permanent installation in motorhomes or boats
- +4
Bosch Battery charger C40-Li 6 V - 12 V, 5A- For 12 V; 6.0 V batteries, max. 5 A
- Compatible battery types: Lithium-Ion (Li-Ion); Absorbent Glass Mat (AGM); Lead acid
- +4
Noco Battery charger GENIUS2DEU 12 V, 2 A- Direct mount charger for 12 V lead-acid, gel and AGM batteries
- Maximum charging power 28 W
- Fully automatic charging cycle keeps your battery in good condition
- Insulation class IP65
- 60.9 cm long charging cable
- Dimensions: 89 mm (L) x 76 mm (W) x 46 mm (H)
- +6
Victron Battery charger Blue Smart IP65 24 V 5A- For 24 V batteries, max. 5 A
- Compatible battery types: Lead (Pb)Lithium Iron Phosphate (not all models) (LiFePo4)Lithium-Ion (Li-Ion)
- +24
Votronic Charging converter StandBy-Charger 12 V 3A- For 12 V batteries, max. 3 A
- Compatible battery types: Lead acid
- Protection against overcharging due to reduced charging voltage
- Suitable for lead-acid, lead-gel and AGM technology
- Compact dimensions of 90 x 60 x 38 mm
- +4
intAct Battery charger ChargeBox 7.5A 12 V und 24 V- For 12 V; 24 V batteries, max. 7.5 A
- Charging capacity: 90 W
- Compatible battery types: Lithium iron phosphate (LiFePo4); Lead (Pb); Lead gel; Absorbent Glass Mat (AGM); Lead acid
- Integrated regeneration mode to activate deeply discharged batteries
- Comprehensive protective functions such as reverse polarity and short-circuit protection
- Dust and water jet protected according to protection class IP65
- +2Victron Battery charger Blue Smart IP22 24 V 16A
- Intelligent charging algorithms
- Remote monitoring via Bluetooth
- Compact design
- High efficiency
- Multistage charging process
- Overload and short-circuit protection
- +4
Einhell Automotive Battery charger CE-BC 6 M 12 V- Intelligent solution for all common 12 V vehicle batteries, max. 6 A
- For gel, AGM, maintenance-free and low-maintenance lead-acid batteries
- Multi-stage charging cycle, microprocessor controlled and monitored
- Optimal for seasonal vehicles with long standing times (convertible/bike)
- With winter charging mode, recondition mode and power supply mode
- Protection class IP65: Dust-tight and protected against water jets
- +5
Novitec Battery refresher Megapulse Lead Battery Refresher 12 V- Suitable for regenerating 12 V lead batteries (e.g. car battery)
- Pulse interval: 8 kHz
- Current consumption: 50 - 150 mA
- Charge current pulse: 1.6 A
- Dimensions: 100 x 30 x 90 mm
- +6
Ctek Battery charger Pro 25S- For 12 V batteries, max. 25 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lithium iron phosphate (LiFePo4); Lithium iron (Li-Fe); Lead (Pb)
- Reconditioning program to restore discharged batteries and overhaul exhausted batteries
- Integrated safety functions protect vehicle and battery
- Lightweight and portable, yet rugged and tough
- +6
Einhell Automotive Battery charger CE-BC 30 M- Multi-stage charging cycle, microprocessor-controlled and monitored
- 2in1: Charging and jump starting with one device
- Selectable voltage 12V/24V for adaptation to vehicle battery
- Trickle charge function for a permanent, ideal state of charge, ideal for seasonal vehicles with long downtimes
- All-round battery charger for a wide range of battery types: For gel, AGM, maintenance-free and low-maintenance lead-acid batteries
- LED battery voltage and charging progress indicator, Electronic overcharge, short-circuit and reverse polarity protection, Fully insulated battery terminals, Ergonomic handle for optimum transportation
- +5
Victron Battery charger Blue Smart with Bluetooth, IP65 24 V 8A- Automatic power supply function
- Capable in extreme cold: down to -30 °C
- Protection against splash water, dust and chemicals
- Seven-stage intelligent charging algorithm
- Several other functions to extend battery life
- Setup and configuration, display of voltage and current via Bluetooth Smart
- +2
intAct Battery charger ChargeBox 3.8A 6 V and 12 V- For 12 V; 6.0 V batteries, max. 3.8 A
- Charging capacity: 50 W
- Compatible battery types: Lithium iron phosphate (LiFePo4); Lead (Pb); Lead gel; Absorbent Glass Mat (AGM); Lead acid
- Dust and water jet-proof housing in accordance with IP65 standard
- Comprehensive protection against short circuits, overcharging and reverse polarity
- Clear LED charge status display and 3.6 m cable
- +5
Victron Battery charger Smart IP43 12 V 30 A 1+1 120-240 V AC- For 12 V batteries, max. 30 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lithium iron phosphate (LiFePo4)
- +2
OSRAM BATTERYcharge 904- With multi-stage charging cycle
- Start-stop compatible – Suitable for vehicles with automatic start-stop system
- Winter mode – Protects batteries at low temperatures
- 9-stage charging cycle – For the uncomplicated charging of lead-acid / AGM batteries
- +2
intAct Battery charger ChargeBox 0.8A 6 V and 12 V- For 12 V; 6.0 V batteries, max. 0.8 A
- Charging capacity: 10 W
- Compatible battery types: Lithium iron phosphate (LiFePo4); Lead (Pb); Lead gel; Absorbent Glass Mat (AGM); Lead acid
- Comprehensive protection through reverse polarity, overcharging and overheating protection
- Robust IP65-certified housing, dustproof and protected against water jets
- LED charge level indicator for 25%, 50%, 75% and 100% charge level
- +5
Einhell Automotive Battery charger CC-BC 8- Suitable for lead-acid batteries
- Display of the current charging current
- Robust sheet steel housing
- Powerful pole clamps
- Reverse polarity and overload protection
- Not suitable for lead gel / AGM batteries
- +4Victron Battery charger Energy BlueSmart IP22 12 V 20A for 3 batteries
- For 12 V batteries, max. 20 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lithium iron phosphate (LiFePo4); Lead gel; Absorbent Glass Mat (AGM)
- +1Victron Battery charger Energy BlueSmart 12 V 15A for 3 batteries
- For 12 V batteries, max. 15 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lead gel; Absorbent Glass Mat (AGM)
- +1
Noco Battery charger GENIUS2 x 4 4x 6-12 V / 2 A- Four bank charger for 6 V and 12 V lead-acid, gel, AGM and lithium-ion batteries
- Maximum charging power 120W (4 x 30 W)
- Fully automatic charging cycle keeps your battery in good condition
- Insulation class IP60
- 3 m long charging cable
- Dimensions: 145 mm (L) x 239 mm (W) x 58 mm (H)
- +4
OSRAM Battery charger BATTERYcharge 908- Charges lithium and lead-acid batteries
- 7-stage charging cycle for lithium batteries
- 9-stage charging cycle for lead-acid/AGM batteries
- Simple operation with digital display
- Automatic long-term maintenance mode after full charge
- Charging current: Max. 8A (12 V) / 4A (24 V)
- +3
Victron Battery charger Blue Smart with Bluetooth, IP65 24 V 13A- Automatic power supply function
- Capable in extreme cold: down to -30 °C
- Protection against splash water, dust and chemicals
- Seven-stage intelligent charging algorithm
- Several other functions to extend battery life
- Setup and configuration, display of voltage and current via Bluetooth Smart
- +4
Ctek Battery charger MXS 10EC- Fully automatic 8-step charge cycle
- Charges batteries from 20 to 200 Ah
- Up to 300 Ah in maintenance mode
- Compensation of weather conditions by temperature sensor
- Splash and dust protected (IP65)
- Charging cable 4 m
- +2
Noco Battery charger Genius Pro 50 50A, 6-12-24 V- Integrated temperature sensor automatically adjusts the charging process for precise and safe charging
- 50A fast charging power for efficient charging and battery maintenance
- Suitable for 6 V, 12 V and 24 V batteries in vehicles, boats and workshops
- Professional smart charger with mains adapter and battery repair function
- 50 amp. Battery charger with trickle charge and battery desulphation. Achieve more with the Geniuspro 50. A multi-voltage charger - 6 volts (50 amps), 12 volts (50 amps) and 24 volts (25 amps) - for many different battery types. An integrated thermal sensor detects the ambient temperature and adjusts the charge to prevent overcharging in hot climates and undercharging in cold climates to maximize battery life and enable fast charging. The Geniuspro detects and charges batteries that are up to 1 volt deep discharged. Thanks to the completely new Force mode for discharged batteries, the charging process can even be started manually down to zero volts. Technical data: - Operating voltage: 120-240 V, 50-60 Hz - Efficiency: Approx. 87% - Power: Max. 750W - Low voltage detection: <1 V (6 V, 12 V, 24 V) - Reverse discharge current: <0.5mA - Operating temperature: -20 °C to +50 °C - Battery type: 6 V, 12 V, 24 V - Battery chemistries: Wet, gel, maintenance-free, CA, EFB, AGM, lithium - Battery capacity: Up to 2000Ah (6 V, 12 V), 1000Ah (24 V) - Housing protection: IP20 - Cable length: 3m - Cooling: Natural convection - Protective devices: Short circuit protection, reverse polarity protection, spark protection, overheating protection, overcharging protection - Dimensions (LxWxH): 31.6 x 17.5 x 9.1 cm - Weight: 2.26 kg Scope of delivery: - GENIUSPRO50 battery charger with interchangeable connectors - 1x Genius Pro charging clamps with built-in eyelets - 1x 3m extension cable - 1x protective bag - 2x self-tapping screws - Various power cables: Type A NA, Type C EU, Type G UK and Type I AU - User manual - Warranty information
- +2
Bosch Battery charger C30 6 V - 12 V, 3.8A- For 12 V; 6.0 V batteries, max. 3.8 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lead gel; Absorbent Glass Mat (AGM); Lead acid
- +5
Victron Battery charger Energy Smart IP43 12 V 50A (3)- High charging capacity 50 amps
- IP43 Protection class
- Compact design
- Simple installation
- High efficiency
- Digital display
- +1
SaleVictron Battery charger Victron Energy Smart 12 V 30A 120-240 V AC- For 12 V batteries, max. 30 A
- Compatible battery types: Lithium-Ion (Li-Ion); Lithium iron phosphate (LiFePo4); Lead gel; Absorbent Glass Mat (AGM)
- +1
Ctek Battery charger MXTS 40- Suitable for lead acid batteries
- Status display on OLED display and LEDs
- Eight-stage, fully automatic charging cycle with adjustable parameters
- Can be used as power supply for vehicles displayed in the showroom
- Sturdy, IP20-protected plastic housing