Dieser Shop benötigt aktiviertes JavaScript.
Turntable needle (68 results) New
Audio-Technica ATN81CP tapered, black Conical 0.6 mil replacement needle for precise scanning Compatible with the AT81CP, AT300P, AT3482, and other models Recommended contact force of 1.0 to 1.5 g for optimal protection High-quality diamond-cut for nuanced sound reproduction Easy installation and cost-effective maintenance Long service life of approximately 300 to 500 hours of play New
Audio-Technica ATN-XP5 elliptical carbon fiber red Elliptical Replacement Cartridge for Crystal-Clear Sound Sturdy carbon-ABS needle holder for high stability Frequency response from 20 Hz to 18 kHz for precise reproduction Ideal for DJs and home audio systems Compatible with the AT-XP7, AT-XP5, AT-XP3, and VM95 series Easy installation with a 1/2-inch mounting system New
Audio-Technica ATN-XP3 Conical Blue Conical Replacement Stylus for the AT-XP3 DJ Cartridge Carbon-fiber-reinforced ABS needle holder for high stability Frequency range from 20 Hz to 18,000 Hz Recommended contact force of 3 g (range: 2–4 g) Long battery life with up to 500 hours of playtime Ideal for DJ performances and home audio systems New
Audio-Technica VMN30xEN elliptical, orange Replacement stylus for VMx cartridge systems Restoring the Original Sound Quality Compatible with the AT-VM530xEN cartridge High-quality elliptical needle cut Easy installation as a replacement part Optimized for the Audio-Technica VMx Series New
Audio-Technica ATN91 Yellow Conical needle tip for precise sound reproduction Compatible with AT91, CN5625AL, and AT90 cartridges Upgrade option for the AT3600 l model Recommended contact force of 2 g Frequency response from 20 Hz to 20,000 Hz High-quality diamond needle with a bonded round shank New
Audio-Technica VMN20xEB Elliptical Blue High-quality replacement stylus for improved sound quality Elliptical needle-shaped stylus for an enhanced listening experience Device-Specific Fit for Audio-Technica Systems Color: Blue Easy Replacement of the Barrel Pin New
Ortofon STYLUS 5S Spherical, Black Spherical diamond cut for solid sound reproduction Compatible with the entire OM series, such as the OM 5S and OM 15 Good tracking performance across the entire audible spectrum Optimal tracking force of 2 g for sound quality and record preservation Easy plug-in replacement for quick swapping Recommended contact force between 1.5 and 2.5 g New
Ortofon Stylus 3E Elliptical Elliptical diamond cut for improved detail reproduction Balanced sound reproduction across the entire audible spectrum Good tracking capability for precise scanning An optimal contact force of 2 g helps protect the records Direct replacement for several Ortofon cartridge models Sturdy and elegant case New
Ortofon Stylus 78 Spherical Tailor-made for 78 RPM shellac records A spherical diamond ensures precise groove guidance Clear and authentic reproduction of historical recordings An ideal tracking force of 2 g protects the record grooves Wide compatibility with the OM, OMP, and TM series Sturdy design for long-lasting use New
Ortofon Stylus D 25 M Mono, Spherical, 25 µm Single-Needle Insertion for the OM, OMP, and TM Series Spherical 25-µm mono diamond for authentic mono playback Suitable for playing microgroove records Moving Magnet (MM) System Recommended contact force of 3 g Tool-free quick-change system New
Ortofon VNL I spherical black Spherical needle-shaped cut for excellent directional stability and minimal tread wear Output voltage of 6 mV at 1000 Hz Frequency range from 20 Hz to 20 kHz for precise sound reproduction Recommended contact force of 4 g for optimal performance Lateral dynamic compliance of 16 µm/mN Designed specifically for professional DJ applications and scratching New
Ortofon DJ E elliptical diamond Designed for scratch and back cueing with a reinforced cantilever Special elliptical stylus for audiophile DJ playback Excellent tracking capabilities and virtually unbreakable Minimizes record wear while ensuring precise sound reproduction Better high-frequency resolution than spherical DJ needles Easy plug-in replacement without tools New
Ortofon Gold elliptical Top-of-the-line model with gold plating for precise sound reproduction Special Pro Elliptical Diamond for High-Definition Details Output voltage of 6 mV Recommended contact force of 3 g Moving Magnet (MM) System Compatible with all OM cartridge bodies New
Ortofon Q.BERT ANNIVERSARY Gold Spherical Moving Magnet DJ Exclusive anniversary edition with a gold-colored finish Spherical diamond for maximum scratch resistance Exceptional groove-tracing capabilities designed specifically for turntablism High output voltage of 11 mV for powerful bass frequencies Recommended contact force of 3 g Easy plug-in replacement without tools New
Ortofon CC MKII SCRATCH Moving Magnet, DJ, Spherical, White Original Replacement Needle for Concorde MKII Scratch Moving Magnet (MM) System Designed Specifically for DJ Applications Spherical needle tip for bidirectional scanning High tracking ability of 120 µm at 315 Hz Recommended contact force of 4 g for a secure fit High output voltage of 10 mV New
Ortofon Stylus GT Moving Magnet (MM) DJ Spherical Black Moving Magnet (MM) Cartridge System Spherical Needle Cut for DJ Applications Impressive output of 8 mV Recommended contact force of 4 g Reinforced rubber suspension for high load capacity Compatible with GT series cartridges New
Ortofon 2M 78 Moving Magnet, Hi-Fi, Gray Spherical diamond stylus, ideal for shellac records Genuine replacement stylus for 2M Mono and 2M 78 cartridges Part of the 2M series with high interchangeability Designed specifically for true mono playback Optimal tracking force for stable playback Spherical 65-µm diamond for 78-RPM playback New
Ortofon Concorde Music Red elliptical, Hi-Fi, moving magnet Original replacement stylus for all Concorde Music cartridges Elliptical diamond on an aluminum cantilever Moving Magnet (MM) System for Hi-Fi Applications Quick and Easy Plug Replacement in the Concorde System Recommended contact force of 2 g Output voltage of 6 mV New
Ortofon Concorde Music Blue Nude Elliptical Diamond Hi-Fi Blue Original replacement stylus for Concorde Music cartridges Bare elliptical diamond on an aluminum cantilever Compatible with all Concorde Music models Easy plug-in replacement without tools Moving Magnet (MM) system with a 6 mV output voltage Recommended contact force of 2 g
Audio-Technica Spare needle ATN3600LC Conical needle grinding Dimension: 0.6 mil Service life: approx. 300 - 500 hours Modern design and user-friendliness Reliable and with outstanding sound quality
Audio-Technica Spare needle ATN3600LE Elliptical pin shape Dimensions of the pin: 0.3 x 0.7 mil Service life: approx. 300 hours Precise needle pressure for optimum audio performance and minimal vinyl wear Suitable for models such as AT-LP60X, AT-LP60, AT-LP2D, AT-PL300, AT-SB727, AT-SB202 Easy to install and operate
Ortofon Spare needle Stylus Pro S Entry-level model for multipurpose use Spherical diamond needle with 20° inclination Solid needle carrier, suitable for DJing Contact force range from 3 to 5 grams
Ortofon Spare needle Stylus 5E Frequency range: 20-20,000 Hz 3 / - 3 dB Tracking capability at 315Hz with recommended tracking force *) - 60 µm Compliance, dynamic, lateral - 20 µm/mN Needle type: Elliptical / Needle radius: r/R 8/18 µm Tracking force range: 1.5-2.0 g (15-20 mN) / Tracking force, recommended: 1.75 g (17.5 mN) Tracking angle - 20
Ortofon Spare needle Stylus Nightclub MKII High-end model with audiophile sound quality Elliptical needle for least possible scratching Wide frequency range (up to 22 kHz) Contact force range from 2 to 5 grams Suitable for use in clubs and discos
Ortofon Spare needle Stylus 10 Frequency response: 20-20,000 Hz 3 /- 3 dB Tracking capability at 315 Hz at recommended tracking force*): 60 µm / compliance, dynamic, lateral: 20 µm/mN Needle type: Elliptical / Radius of needle tip: r/R 8/18 µm Contact force range: 1.25-1.75 g (12.5-17.5 mN) / Recommended contact force: 1.5 g (15 mN) Tracking angle: 20
Audio-Technica Spare needle AT-VMN95E Elliptical set needle - elliptical diamond needle follows the deflections of the record groove with even greater precision, providing better frequency response with higher phase fidelity and low distortion "Dual-Moving-Magnet" pickup - needle can be exchanged and therefore used almost indefinitely All needles of the VM-95 series have the same electromagnetic drive unit Compatible with each other due to same drive unit 100% Compatible with the pickup model: AT-VM95E Approximate wear time at 300 hours
Ortofon Spare needle Stylus DJ S Basic model for scratching and backcueing Particularly stable thanks to extra-reinforced needle carrier Spherical needle with excellent scanning capability Contact force range from 2 to 4 grams Extremely low plate wear
Ortofon Spare needle Stylus MIX Large, wide and robust pen body Easy to grip and handle Better fixation due to metal spring Tangible feedback after correct mounting Large pen view cutout Recommended contact force: 3 grams
Audio-Technica Spare needle AT-VMN95C Conical, beveled needle - rounded surface scans the groove of vinyl records very precisely "Dual-Moving-Magnet" pickup - needle can be exchanged and therefore used almost indefinitely All needles of the VM-95 series have the same electromagnetic drive unit Compatible with each other due to same drive unit 100% Compatible with the pickup model: AT-VM95C Approximate wear time at 500 hours
Ortofon Spare needle Stylus CLUB Large, wide and robust pen body Easy to grip and handle Better fixation due to metal spring Tangible feedback after correct mounting Large pen view cutout Recommended contact force: 3 grams
Audio-Technica Spare needle AT-VMN95SP Conical, beveled needle (78 rpm) - rounded surface scans the groove of shellac records very precisely «Dual-Moving-Magnet» pickup – needle can be exchanged and therefore used almost indefinitely All needles of the VM-95 series have the same electromagnetic drive unit Compatible with each other due to same drive unit 100% Compatible with the pickup model: AT-VM95SP Approximate wear time at 500 hours
Audio-Technica Spare needle AT-VMN95EBK Elliptical set needle – elliptical diamond needle follows the deflections of the record groove with even greater precision, providing better frequency response with higher phase fidelity and low distortion «Dual-Moving-Magnet» pickup – needle can be exchanged and therefore used almost indefinitely All needles of the VM-95 series have the same electromagnetic drive unit Compatible with each other due to same drive unit 100% Compatible with the pickup model: AT-VM95E Approximate wear time at 300 hours New
Audio-Technica ATN85EP Replacement Ellipse Needle, White Elliptical Replacement Cartridge for AT85EP, AT301EP, AT311EP, AT316EP, and AT92ECD High-quality bonded diamond with a 0.3 x 0.7 mil cut for precise sound reproduction Sturdy needle holder made of aluminum tubing for optimal stability Recommended tracking force of 1.0 to 1.5 g to protect the record Electromagnetic Transducer (MM) for Hi-Fi Applications Easy needle replacement to extend the life of the cartridge New
Audio-Technica VMN50xSH Shibata Needle Grind Original Replacement Needle for VM Systems High-quality Shibata needle tip for precise scanning Optimized for the VMx series to restore the sound image Compatible with AT-VM750xSH cartridges Easy replacement of the scanning needle New
Audio-Technica VMN70xSP Conical, Gray Specialized Solution for Shellac Records Conical needle cut for vintage records Device-Specific Compatibility High-quality replacement stylus for mono records Elegant Design in Gray New
Audio-Technica VMN45xML Microlinear Boron Needle Holder, Red Bare Microlinear replacement needle with a 2.2 x 0.12 mil cut Solid boron stylus holder for precise groove vibrations Designed for AT-VM745xML cartridges Interchangeable design within the AT-VMx series Metal structure designed to minimize vibrations Precision needle manufactured in Japan
NewAudio-Technica ATN81CP tapered, black
NewAudio-Technica ATN-XP5 elliptical carbon fiber red
NewAudio-Technica ATN-XP7 elliptical aluminum transparent
NewAudio-Technica ATN-XP3 Conical Blue
NewAudio-Technica VMN30xEN elliptical, orange
NewAudio-Technica ATN91 Yellow
NewAudio-Technica VMN20xEB Elliptical Blue
NewOrtofon STYLUS 5S Spherical, Black
NewOrtofon Stylus 3E Elliptical
NewOrtofon Stylus 78 Spherical
NewOrtofon Stylus D 25 M Mono, Spherical, 25 µm
NewOrtofon VNL I spherical black
NewOrtofon DJ E elliptical diamond
NewOrtofon Gold elliptical
NewOrtofon Q.BERT ANNIVERSARY Gold Spherical Moving Magnet DJ
NewOrtofon CC MKII SCRATCH Moving Magnet, DJ, Spherical, White
NewOrtofon Stylus GT Moving Magnet (MM) DJ Spherical Black
NewOrtofon 2M 78 Moving Magnet, Hi-Fi, Gray
NewOrtofon Concorde Music Red elliptical, Hi-Fi, moving magnet
NewOrtofon Concorde Music Blue Nude Elliptical Diamond Hi-Fi Blue
Fenton Spare needle RPS1 Red
Audio-Technica Spare needle ATN3600LC
Ortofon Spare needle Stylus Pro
Audio-Technica Spare needle ATN3600LE
Ortofon Spare needle Stylus Pro S
Ortofon Spare needle Stylus Night Club S
Ortofon Spare needle Stylus 5E
Ortofon Spare needle Stylus Night Club E
Ortofon Spare needle Stylus Nightclub MKII
Ortofon Spare needle Stylus 10
Verifiedsoundmaster Spare needle Typ 02
Audio-Technica Spare needle AT-VMN95E
Reloop Spare needle Stylus OM Black
Ortofon Spare needle Stylus DJ S
Ortofon Spare needle Stylus MIX
Audio-Technica Spare needle AT-VMN95C
Ortofon Spare needle Stylus CLUB
Ortofon Spare needle Stylus Q.Bert
Audio-Technica Spare needle AT-VMN95SP
Audio-Technica Spare needle AT-VMN95EBK
Reloop Spare needle Stylus Black
NewAudio-Technica ATN85EP Replacement Ellipse Needle, White
NewAudio-Technica VMN50xSH Shibata Needle Grind
NewAudio-Technica VMN70xSP Conical, Gray
NewAudio-Technica VMN45xML Microlinear Boron Needle Holder, Red
