Memory accessories (450 results)
- +27
Delock Screws Mounting set 31 pieces for M.2 SSD modules- Mounting set 31-piece for M.2 SSD / module
- Spacer small: M2 x 4.75 x 2.5 mm
- Spacer large: M2 x 4.75 x 4.5 mm
- Washer (plastic): M2.5 x 5.0 x 0.5 mm
- Screw: M2 x 2.5 mm
- +27
Delock SATA3 cable 50 cm red, with metal clip- SATA with metal clip at SATA with metal clip
- Cable length: 50 cm
- +14
be quiet! 12VHPWR adapter cable 60 cm- Connections: 12 pin graphics card / 12VHPWR 12 4-pin (GPU)
- Cable length: 60 cm
- Enables operation of all graphics cards with a 12VHPWR connector
- Requires 2 connections on the PSU side
- Elegant appearance with attractive black sleeve
- +90
be quiet! M.2 heat sink MC1 Pro- Heat dissipation of an M.2 SSD module
- Fits single and double sided M.2 2280 modules
- Allows longer duration of maximum read and write speed
- Integrated heat pipe enables higher cooling capacity
- Elegant black aluminum surface
- +22
Delock SATA3 cable 85342 50 cm- SATA with metal clip at SATA with metal clip
- Connectors: 1 x SATA 6 Gb/s 7 pin female straight > 1 x SATA 6 Gb/s 7 pin female straight
- With metal clips, color: transparent
- Data transfer rate up to 6 Gb/s
- Backward compatible with SATA 1.5 Gb/s and 3 Gb/s
- Cable length: 50 cm
- +7
SilverStone M.2 heat sink TP02-M2- Aluminum alloy heat sink improves M.2 SSD cooling area
- Efficient thermal pad to reduce the temperature
- Double layer design improves SSD cooling for stability and efficiency
- Supports 2280 M.2 SSD
- Easy to attach with silicone straps without damaging the M.2 SSD
- +60
Delock 3.5" installation frame 2.5″ SATA- Connectors: 1 x SATA 6 Gb/s 22 pin male 1 x SATA 6 Gb/s 22 pin female
- For installation in a 3.5″ bay
- For 1 x 2.5″ device
- Horizontal and vertical mounting holes
- Suitable for 2.5″ SATA HDD / SSD: HDD height up to 12.5 mm SATA HDD / SSD up to 6 Gb/s
- Material: plastic
- +8
Delock 2.5" adapter board M.2 - SATA- Connectors: 1 x SATA 6 Gb/s 22 pin male > 1 x 67 pin M.2 Key B slot
- Interface: SATA, form factor: 2.5″
- Supports M.2 modules in 2280, 2260, 2242 and 2230 format with Key B or Key B M on SATA basis
- Maximum height of components on the module: 1.35 mm, use of double-sided modules possible
- Bootable
- Dimensions (LxWxH): approx. 100 x 70 x 7 mm, OS independent, no driver installation required
- +22
Delock Power cable 6Pin - 8Pin 20 cm- For power supply of PCIe cards with 8-pin connector
- Cable length: 20 cm
- +15
be quiet! 12V-2X6 / 12VHPWR 90° Reversed Cable PCI-E 70 cm- Designed for 600W
- Suitable for any graphics card with 12V-2x6 or 12VHPWR connection
- The reverse connection is ideal for graphics cards where the 4 signal lines are on the upward-facing side of the connector
- Elegant look with black rubberized casing
- Complies with the latest specifications for a stable hold
- +10
Delock SATA3 cable 6 Gb/s red, angled, clip, 50 cm- SATA at SATA
- SATA 6 Gb/s cable straight to bottom angled
- Cable length: 50 cm
- +23
Delock Power cable extension 4Pin PWM for CPU & case fan- Connections: PWM 4Pin / PWM 4Pin
- Cable length: 30 cm
- Wire gauge: 22 AWG
- PWM line (Pulse Width Modulation)
- +27
be quiet! M.2 heat sink MC1- Heat dissipation of an M.2 SSD module
- Fits single and double sided M.2 2280 modules
- Allows longer duration of maximum reading speed
- Elegant black aluminum surface
- +2
Delock M.2 heat sink SSD 2280 Black- Heat sink for M.2 SSD 2280
- Material: Aluminum
- Color: black
- Mass (LxWxH): approx. 76 x 23 x 9 mm
- +14
be quiet! 12V-2x6 / 12VHPWR 90° Cable PCI-E 70 cm- Connections: 12V-2x6 / 12VHPWR 12 4-pin (GPU)
- Cable length: 70 cm
- 90° angled plug
- Designed for 600W
- Suitable for any graphics card with 12V-2x6 or 12VHPWR connection
- Elegant look with black rubberized casing
- +126
ICY BOX Protective housing IB-AC602a 3.5"- Dust cover
- Crash protection
- Splash water protection
- Stackable
- Suitable for all IDE/SATA 3.5" HDDs
- +7
Delock Power cable extension JST plug to socket, 4 pin 30 cm- Connections: PWM 4Pin / PWM 4Pin
- Cable length: 30 cm
- +18
Delock Power cable extension 4Pin PWM for CPU & case fan- Connections: PWM 4Pin / PWM 4Pin
- Cable length: 50 cm
- Wire gauge: 22 AWG
- PWM line (Pulse Width Modulation)
- +8
Delock Y-power cable Molex - Molex/Floppy 20 cm- Molex 4-pin male, Molex 4-pin female, 3.5 FDD
- Cable length from 20.5 cm
- +30
Delock Power cable extension 4Pin PWM for CPU & case fan- Connections: PWM 4Pin / PWM 4Pin
- Cable length: 20 cm
- Wire gauge: 22 AWG
- PWM line (Pulse Width Modulation)
- +5
Delock SATA3 cable 3.3/5/12 Volt Extension 10 cm- 22 pin (7 pin data 15 pin power) connector
- 22 pin (7 pin data 15 pin power) female connector
- Variant with 5 power lines (yellow = 12 V, black = GND, red = 5 V, orange = 3.3 V)
- Transfer rate up to 6 Gb/s, backward compatible with SATA 1.5 Gb/s and 3 Gb/s
- Wire gauge: 26 AWG data wire, 18 AWG power wire
- Length without connectors: approx. 10 cm
- +17
Delock SATA3 cable yellow, 30 cm- SATA at SATA
- Data transfer rate up to 6 Gb/s
- Backward compatible with SATA 1.5 Gb/s and 3 Gb/s
- Wire gauge: 26 AWG
- Cable length: 30 cm
- +9
ICY BOX M.2 heat sink IB-M2HS-PS5- For M.2 hard drives
- For optimal heat dissipation M.2 SSD from PlayStation 5
- Suitable for M.2 SSD in size 22x 80 mm
- Also suitable for installation on standard PC mainboards
- Three thermal pads included
- Elegant black aluminum surface
- +6
Delock Power cable 6 Pin – 6+2 Pin 50 cm- Connections: 6-pin graphic card / 8 Pin (6+2)
- Cable length: 50 cm
- Wire gauge: 20 AWG
- +10
Delock Power cable extension SATA 50 cm- SATA 15 pin male to female
- Wire gauge: 18 AWG
Also available in: - +9
Delock M.2 heat sink 70 mm, 10 mm height- Heat dissipation of an M.2 module
- Incl. 3x self-adhesive heat pad
- Material: Aluminum
- Dimensions (LxWxH): approx. 70 x 22 x 10 mm
- +3
Delock Y-power cable SATA - 2x SATA 30 cm- SATA 15 pin power connector with snap-in function
- 2x SATA 15 pin power jack with metal clip
- Variant with 5 power lines (yellow = 12 V, black = GND, red = 5 V, orange = 3.3 V)
- Wire gauge: 20 AWG
- With gold colored metal clips
- Length incl. connections: approx. 30 cm
Also available in: - +20
ICY DOCK Clip-on frame MB-991IK-B 2.5"- Accepts one 2.5" SATA or SAS HDD/SSD
- Fits in a 3.5" drive bay
- Status LED embedded in the front
- Ventilation openings on front, back, top and bottom sides
- Supports SATA 6 Gbps
- +2
Corsair Power cable PCIe 12V-2x6 to 2x 8-pin 65 cm- Cable type: Power cable
- Power connection side A: 12V-2x6
- Angular plug: No
- Power connection side B: 8 Pin (6+2)
- Cable length: 65 cm
- +44
SilverStone Y-power cable SST-CPF01 PWM for housing fans 10 cm- Connections: PWM 4Pin / PWM 4Pin
- Cable length: 10 cm
- Supports 2 PWM fans from a single motherboard PWM header
- +6
Delock Converter 2.5″ M.2 / mSATA to SATA adapter- 1 x SATA 6 Gb/s 22 pin connector
- 1 x 67 Pin M.2 Key B Slot
- 1 x mSATA slot (half size / full size)
- Supports M.2 modules in 2280, 60, 42 and 30 format with Key B or Key B M on SATA basis
- Maximum current for modules: 3 A
- Short circuit protection, overheating protection, ESD protection up to 2 kV
- +12
Delock Power cable extension SATA 30 cm- SATA 15 pin male to female
- Wire gauge: 18 AWG
Also available in: - +5
Delock SATA3 cable 3.3/5/12 Volt Extension 30 cm- 22 pin (7 pin data 15 pin power) connector
- 22 pin (7 pin data 15 pin power) female connector
- Variant with 5 power lines (yellow = 12 V, black = GND, red = 5 V, orange = 3.3 V)
- Transfer rate up to 6 Gb/s, backward compatible with SATA 1.5 Gb/s and 3 Gb/s
- Wire gauge: 26 AWG data wire, 18 AWG power wire
- Length without connectors: approx. 30 cm
- +9
Delock Power adapter 2x Molex to 8Pin for graphic card, 15 cm- Connections: Molex / 8-pin graphic card
- Cable length: 15 cm
- Inner conductor: tinned copper
- Power supply: 12 V
- Cable with textile sheath to protect the cable
- +1
Delock SATA3 cable black, clip, flexible, 30 cm- Data transfer rate of up to 6 Gbps
- Wire gauge: 28 AWG
- With metal clips
- Backward compatible with SATA 1.5 Gbps and 3 Gbps
- Cable length: approx. 30 cm
- Cable length: 30 cm
- +12
Delock Power cable extension 4Pin - 4Pin CPU 50 cm- Connections: P4 4Pin CPU / P4 4Pin CPU
- Cable length: 50 cm
- Voltage: 12 V
- Wire gauge: 18 AWG
