Other HDD/SSD accessories (95 results)
- +47
Delock Screws Mounting set 31 pieces for M.2 SSD modules- Mounting set 31-piece for M.2 SSD / module
- Spacer small: M2 x 4.75 x 2.5 mm
- Spacer large: M2 x 4.75 x 4.5 mm
- Washer (plastic): M2.5 x 5.0 x 0.5 mm
- Screw: M2 x 2.5 mm
- +28
be quiet! M.2 heat sink MC1 Pro- Heat dissipation of an M.2 SSD module
- Fits single and double sided M.2 2280 modules
- Allows longer duration of maximum read and write speed
- Integrated heat pipe enables higher cooling capacity
- Elegant black aluminum surface
- +4
ICY BOX Adapter IB-AC603b-U3- Tool-free mounting of hard disks
- For 2.5" SATA drives with a height of up to 9.5 mm
- For Windows, macOS and Chrome OS
- Integrated 16 cm USB cable
- Connection: USB 3.0 Type-A with up to 5 Gbps
- +34
be quiet! M.2 heat sink MC1- Heat dissipation of an M.2 SSD module
- Fits single and double sided M.2 2280 modules
- Allows longer duration of maximum reading speed
- Elegant black aluminum surface
- +18
Delock Converter SATA - USB 3.0- For connecting SATA drives (up to 4 TB) via USB
- Inputs: 1x USB 3.0 type Micro-B (uplink), 1x DC power jack
- Drive interface: SATA 6 Gbps 22-pin socket
- Data transfer rate up to 5 Gbps (USB 3.0 Gen. 1)
- LED display, Plug&Play
- +6
ICY BOX M.2 heat sink IB-M2HS-PS5- For M.2 hard drives
- For optimal heat dissipation M.2 SSD from PlayStation 5
- Suitable for M.2 SSD in size 22x 80 mm
- Also suitable for installation on standard PC mainboards
- Three thermal pads included
- Elegant black aluminum surface
- +36
ICY BOX Protective housing IB-AC602a 3.5"- Dust cover
- Crash protection
- Splash water protection
- Stackable
- Suitable for all IDE/SATA 3.5" HDDs
- +7
Delock Converter 64188 USB-C to SATA- For connecting SATA drives to the USB Type-A socket
- Connectors: USB Type C (USB 3.1 Gen. 2), DC power jack
- Drive interface: SATA 6Gb/s 22 pin female connector
- Data transfer rate up to 6 Gb/s
- LED display
- +17
Delock M.2 heat sink SSD 2280 Black- Heat sink for M.2 SSD 2280
- Material: Aluminum
- Color: black
- Mass (LxWxH): approx. 76 x 23 x 9 mm
- +10
Delock Converter 2.5″ M.2 / mSATA to SATA adapter- 1 x SATA 6 Gb/s 22 pin connector
- 1 x 67 Pin M.2 Key B Slot
- 1 x mSATA slot (half size / full size)
- Supports M.2 modules in 2280, 60, 42 and 30 format with Key B or Key B M on SATA basis
- Maximum current for modules: 3 A
- Short circuit protection, overheating protection, ESD protection up to 2 kV
- +3
SaleDelock 3.5" installation frame for 2x 2.5" HDD/SDD- Mounting frame
- 3.5″ > 2 x 2.5″ HDD
- Screws
- Washers
- +8
Delock 2.5" adapter board mSATA/Mini-PCI-Express – SATA/USB- 1 x SATA 6 Gb/s 22 pin connector
- 1 x USB 2.0 type Mini-B socket
- 1 x mSATA / Mini PCIe slot (half size / full size)
- For 3.3 V mSATA modules
- Data transfer rate up to 6 Gb/s
- Bootable
- +3
Delock Installation frame 2x 2.5" - 3.5"- 2 metal mounting frame
- For installation in the 3.5″ bay
- For all 2.5" hard drives/SSD
- +5
Delock DVD tray adapter for 2.5" HDD/SSD- No driver installation required
- Supports a 5 V HDD/SSD with up to 3 TB storage capacity
- Suitable for one HDD/SSD with max. 9.5 mm height
- Supports SATA-III standard (6 Gbps)
- Incl. universal front panel
- +3
ICY DOCK Clip-on frame ToughArmor MB842MP-B- Uses 1x PCIe 3.0/4.0 x8 or x16 slot
- Installable in a single standard height PCIe slot
- Eagle-Hook latch holds drives securely in the enclosure
- Power and data transfer via PCIe interface
- Tool-less M.2 SSD installation
- Supplied thermal pad
- +9
Delock 5.25" installation frame for 1x 3.5" HDD/SDD- For installation into a 5.25″ bay
- For one 3.5″ device
- Material: aluminium
- +6
Delock 3.5" installation frame for 1x 2.5" HDD/SSD- For installation in a free 3.5" bay
- Holds 1 x 2.5"
- +38
Delock 3.5" installation frame 2.5″ SATA- Connectors: 1 x SATA 6 Gb/s 22 pin male 1 x SATA 6 Gb/s 22 pin female
- For installation in a 3.5″ bay
- For 1 x 2.5″ device
- Horizontal and vertical mounting holes
- Suitable for 2.5″ SATA HDD / SSD: HDD height up to 12.5 mm SATA HDD / SSD up to 6 Gb/s
- Material: plastic
- +16
SilverStone M.2 heat sink TP02-M2- Aluminum alloy heat sink improves M.2 SSD cooling area
- Efficient thermal pad to reduce the temperature
- Double layer design improves SSD cooling for stability and efficiency
- Supports 2280 M.2 SSD
- Easy to attach with silicone straps without damaging the M.2 SSD
- +12
Delock mSATA adapter board SATA -mSATA- SATA with power at mSATA
- For 3.3 V mSATA modules
- Supports Native Command Queuing (NCQ)
- Supports S.M.A.R.T
- Supports TRIM
- +9
ICY BOX Heat sink with fan for M.2 SSD- M.2 SSD Cooler
- Low noise 20 mm fan
- Reduces SSD temperature by up to 25%
- Made of high quality aluminum
- For M.2 SSD size 22x 80 mm
- +42
Corsair Mounting bracket 2.5" to 3.5"- Allows solid state drives to be mounted in a 3.5" bay
- 8 screws included
- Dimensions: 100 (W) x 12 (H) x 100 (D) mm
- +1
Delock Adapter Mini PCI-Express Half size – Full size- Expansion of half size Mini PCI Express or mSATA cards to full size
- 4 mounting holes
- Metal version
- +10
Delock M.2 heat sink for SSD 2280 with RGB LED lighting- Efficient heat dissipation for M.2 SSDs
- Simple installation with heat conduction pads for optimum cooling
- Material combination of copper and aluminum for best cooling properties
- Integrated RGB LED lighting for gaming PCs
- LED light strips with mainboard connection and ARGB synchronization
- Compact dimensions of 83 x 26 x 34 mm, color black
- +18
ICY BOX Hard drive converter IB-2536StS- Aluminum heat sink cools the hard drive
- Fanless design
- With eject button
- Tool-less hard disk replacement
- Supports hard drives and SSDs with a max. height of 9.5 mm
- +2
Delock 5.25" installation frame 1x3.5", 1x2.5", 2xUSB3 Ports , Hot-Swap- For installation in 5.25″ bay
- Connectors: Front: 1 x 2.5″ SATA HDD bay, 1 x 3.5″ SATA HDD bay, 2 x USB 3.0 Type-A female, 1 x power on/off switch, Rear: 2 x SATA 22 pin male, 1 x 19 pin USB 3.0 male post connector
- Suitable for all 2.5″ SATA HDDs and 3.5″ SATA HDDs with up to 6 Gb/s
- Suitable for 2.5″ SATA HDDs / SSDs with HDD height up to 9.5 mm
- Data transfer rate up to 6 Gb/s, hot swap
- Removable frame with key lock, OS independent, no driver installation required
- +2
Delock 2.5" adapter board for M.2 modules- 2.5" mounting frame for M.2 modules on Key-B basis (SATA)
- No driver installation required
- Internal system integration
- Bootable and operating system independent
- Not compatible with NVME M.2 modules
- +1
Delock Converter SATA 22 Pin > M.2 NGFF Without frame- Connectors: SATA 22 pin male > 67 pin M.2 NGFF Key B slot
- Supports M.2 NGFF modules in 2280, 2260, 2242 and 2230 format with Key B or Key B M on SATA basis
- Bootable
- Interface: SATA, data transfer rate up to 6 Gb/s
- OS independent, no driver installation required
- +1
VerifiedExsys SATA switch EX-3465 3.5" and 5.25"
return- Zustand: Neu Packaging: Geöffnet
- 1 upstream, 4 downstream ports
- Ideal for installing multiple operating systems distributed across multiple hard drives
- LED indicator for active hard disk
- Saves the setting of the hard disk to be booted in the built-in EEPROM
- Key to prevent unauthorized access to the hard disks
- With 3.5" to 5.25" adapter frame
- +4
Delock Installation set 2.5″ to 3.5″- Installation kit for the 3.5″ bay with or without guide rail
- For 2.5″ devices
- +66
Corsair Dual SSD Mounting Bracket from 2.5" to 3.5- Customize your PC's storage capacity by placing up to two 2.5-inch SATA solid-state drives in a 3.5-inch drive shaft
- Suitable for SSDs with 7 or 9.5 cm height
- Adjustable mounting points support various dual SSD installation options
- Simply mount SSDs in the bracket and install them in an existing 3.5-inch drive bay using the included screws
- The design provides more space, allowing you to connect SATA data and power cables to your SSDs without overloading the ports
- +12
ICY BOX IB-M2S253- Convert M.2 SSDs to 2.5" format easily
- For M.2 SATA SSDs (PCIe NVMe M.2 SSDs are not supported)
- Data transfer rates up to 6 Gbps SATA III, downward compatible
- Standard format 2.5" with a height of 7 mm
- +13
LC-Power Hard drive converter LC-ADA-35-225- Adapter to install 2x 2.5" hard drives in a 3.5" drive bay
- +3
Delock 2.5" installation frame with slot bracket- Suitable for installation in a free slot (e.g. PCI or PCI-Express)
- Black metal frame
- Simple assembly
- +12
Delock 2.5" adapter board M.2 - SATA- Connectors: 1 x SATA 6 Gb/s 22 pin male > 1 x 67 pin M.2 Key B slot
- Interface: SATA, form factor: 2.5″
- Supports M.2 modules in 2280, 2260, 2242 and 2230 format with Key B or Key B M on SATA basis
- Maximum height of components on the module: 1.35 mm, use of double-sided modules possible
- Bootable
- Dimensions (LxWxH): approx. 100 x 70 x 7 mm, OS independent, no driver installation required
- +2
ICY BOX Protective case IB-AC628 2.5"/3.5"- For ten 2.5- and 3.5-inch hard disks or SSDs, respectively
- Protects against splashing water, dust, shocks and charging
- Partition walls variably adjustable
- +13
SilverStone Installation frame SDP08-LITE for 2x 2.5" HDD/SDD- Space for two 2.5" disks
- Compatible with most 2.5" hard drives and SSDs
- Fits in any 3.5" bay
- +9
ICY BOX 3.5" installation frame IB-AC643 for 2x 2.5" HDD/SDD- For 2x 2.5" SSD/HDD in one 3.5 slot
- Suitable for one 3.5" mounting bay
- Also suitable for very small media center PCs
- Frame is made of full metal for better heat dissipation of the hard drives
- Mounting holes for an optional 80 mm fan on the underside
- +9
Delock Protective housing for 2.5″ HDD / SSD gray- Suitable for 2.5″ HDDs / SSDs with HDD height up to 9.5 mm
- Reclosable
- Opening for SATA 22 pin connector
- Material: plastic
- Color: gray
Also available in: - +1
QNAP Adapter QDA-UMP4- Support for M.2 2280 PCIe 4.0 x4 NVMe SSD drives
- Design for better heat dissipation
- Allows mounting in a PC/workstation
- Use in QNAP NAS for efficient storage
- +3
HP Screws M3 48 pieces, for 2.5" drive installation- 48 M3 (grommet) screws for 2.5" HDD/SSD mounting
- For HP G3/G4 desktop PCs
- +5
Delock M.2 adapter board SATA - M.2 Key-B SATA SSD- SATA with power at M.2 Key-B
- Interface: SATA
- Supports M.2 modules in 2280, 2260, 2242 and 2230 format with Key B or Key B M on SATA basis
- Maximum height of the components on the module: 1.5 mm, use of double-sided modules possible
- Supports Native Command Queuing (NCQ)
- +6
ICY BOX Interchangeable frame slot 2.5" and 3.5" for IB-129SSK-B- Removable frame slide-in, suitable for Icy Box IB-129SSK-B
- Supports all 3.5" and 2.5" hard drives
