Dieser Shop benötigt aktiviertes JavaScript. Cette boutique nécessite JavaScript activé. Questo negozio richiede JavaScript attivato. This shop requires JavaScript to be enabled.
Developer boards (132 results)
Raspberry Pi Developer board Raspberry Pi 5 8 GB Broadcom BCM2712 SOC with 2.4 GHz 64-bit Arm Cortex-A76 quad-core CPU 8 GB DDR4 Ram Dual-band 802.11ac Wi-Fi and Bluetooth 5.0 Two 4Kp60 HEVC capable micro-HDMI ports Standard 40-pin Raspberry Pi GPIO interface Power supply: external 5 V 5A power supply via USB-C (sold separately)
Raspberry Pi Developer board Raspberry Pi 5 4 GB Broadcom BCM2712 SOC with 2.4 GHz 64-bit Arm Cortex-A76 quad-core CPU 4 GB DDR4 Ram Dual-band 802.11ac Wi-Fi and Bluetooth 5.0 Two 4Kp60 HEVC capable micro-HDMI ports Standard 40-pin Raspberry Pi GPIO interface Power supply: external 5 V 5A power supply via USB-C (sold separately)
Raspberry Pi Starter kit Raspberry Pi 4 Model B 8 GB Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5 GHz, 8 GB LPDDR4-3200 SDRAM Ram Gigabit Ethernet (LAN), 2.4 GHz / 5.0 GHz IEEE 802.11ac Wlan, Bluetooth 5.0, BLE Raspberry Pi standard 40-pin GPIO header (backward compatible with older models) 2x Micro HDMI port, supports resolutions up to 4K 32 GB Micro SD card with pre-installed RasbianOS operating system Starter set including 32 GB micro SD card, power supply, case, Lan cable and HDMI cable
Raspberry Pi Developer board Raspberry Pi 5 1 GB Broadcom BCM2712 SOC with 2.4 GHz 64-bit Arm Cortex-A76 quad-core CPU 1 GB DDR4 Ram Dual-band 802.11ac Wi-Fi and Bluetooth 5.0 Two 4Kp60 HEVC capable micro-HDMI ports Standard 40-pin Raspberry Pi GPIO interface Power supply: external 5 V 5A power supply via USB-C (sold separately)
Raspberry Pi Developer board Raspberry Pi 5 2 GB Broadcom BCM2712 SOC with 2.4 GHz 64-bit Arm Cortex-A76 quad-core CPU 2 GB DDR4 Ram Dual-band 802.11ac Wi-Fi and Bluetooth 5.0 Two 4Kp60 HEVC capable micro-HDMI ports Standard 40-pin Raspberry Pi GPIO interface Power supply: external 5 V 5A power supply via USB-C (sold separately)
Arduino Developer board Uno Q 4GB ARM Cortex-Processor Audio channels: Stereo Integrated graphic: Yes Interfaces: I²C, UART, SPI, CAN, WLAN, Type-C USB 3.1 (3.1 / 3.2 Gen. 2), Bluetooth
Raspberry Pi Developer board Pi Pico 2W Based on the success of the original Pico, but with the brand new microcontroller chip: RP235x, created by Raspberry Pi in the UK With more powerful ARM cores, higher clock rate, SRAM and flash memory Features a new security architecture based on Arm TrustZone The Raspberry Pi Pico 2 offers improved performance and functionality while remaining compatible (hardware and software) with the previous models of the Raspberry Pi Pico family and their accessories Processor cores: Dual ARM Cortex-M33 cores Frequency: Up to 150 MHz
Raspberry Pi Starter kit Raspberry Pi 3 Model B+ 1 GB Broadcom BCM2837B0, Cortex-A53, 64-bit, quad-core SoC with 1.4 GHz 2.4 GHz/5 GHz IEEE 802.11 b/g/n/ac wireless LAN, Bluetooth Low Energy v4.2 (BLE) Gigabit Ethernet via USB 2.0 (maximum throughput 300 Mbps) Raspberry Pi standard 40-pin GPIO header (backward compatible with older models) 32 GB Micro SD card with pre-installed RasbianOS operating system Starter set including 32 GB micro SD card, power supply, case, Lan cable and HDMI cable
Raspberry Pi Developer board Raspberry Pi 5 16 GB Broadcom BCM2712 SOC with 2.4 GHz 64-bit Arm Cortex-A76 quad-core CPU 16 GB DDR4 Ram Dual-band 802.11ac Wi-Fi and Bluetooth 5.0 Two 4Kp60 HEVC capable micro-HDMI ports Standard 40-pin Raspberry Pi GPIO interface Power supply: external 5 V 5A power supply via USB-C (sold separately)
Arduino Developer board Arduino UNO R4 WiFi Renesas RA4M1 SoC with Arm Cortex-M4 32 bit 48 MHz processor, 32 KB SRAM, 256 KB flash memory Version with ESP32-S3 WiFi / Bluetooth BLE Compatible with all older Arduino UNO shields Input voltage: 6 - 24 V DC Interfaces: 14x digital pins, 6x PWM, 6x ADC, 1x 12 bit DAC, 1x SPI, 1x i2C, 1x CAN 12x8 LED matrix
M5Stack Development kit CoreS3 ESP32S3 loT Based on ESP32, supports WiFi @16M Flash, 8M PSRAM Built-in camera, proximity sensor, speaker, power indicator, RTC, I2S amplifier, dual microphone, capacitor touch screen, on/off button, reset button, gyroscope TF card slot, High strength glass Supports OTG and CDC functions AXP2101 power management, power saving design Supported programming platforms: Arduino, UI-Flow
Raspberry Pi Developer board Raspberry Pi Pico Rev3 264 KB Raspberry Pi microcontroller Cortex-M0 based RP2040 processor 265 KByte SRAM, 2 MB Flash memory Micro USB port for connection to a computer 30 GPIO pins, 4 of which can be used as analog input 2 × UARTs, 2 × SPI controllers and 2 × I2C controllers, 16 × PWM channels Operating voltage: 1.8 - 5.5 V DC
Raspberry Pi Developer board Raspberry Pi 4 Model B 4 GB Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5 GHz 4 GB LPDDR4-3200 SDRAM Ram Gigabit Ethernet (LAN), 2.4 GHz / 5.0 GHz IEEE 802.11ac Wlan, Bluetooth 5.0, BLE Interfaces: Micro-HDMI, USB 2.0, USB 3.0, WLAN, GPIO, Bluetooth, RJ-45 (1000Mbps) Raspberry Pi standard 40-pin GPIO header (backward compatible with older models) 2x Micro HDMI port, supports resolutions up to 4K
Arduino Developer board Arduino Uno R3 DIP Edition ATmega328 microcontroller, clock rate: 16 MHz Flash memory: 32 KB (thereof 0.5 KB for the bootloader) Operating voltage : 5 V, Recommended input voltage: 7-12 V Interfaces: USB 2.0, GPIO Lightweight replaceable microcontroller in DIP package
M5Stack Developer board M5 Core 2 ESP32 IoT Development Kit ESP32 240 MHz Dualcore Processor with 8 MB PSRAM & 16 MB Flash Memory Connectivity: USB-C, Bluetooth, Wifi, 4-pin Grove 2" IPS display with 320 x 240 pixel resolution 4-pin Grove connector, supports I2C and UART Supported platforms: UIFlow, MicroPython, Arduino Integrated 3.7 V 390 mAh rechargeable battery Sale
HutoPi Gaming kit Raspberry Pi 4, 4 GB Retrogaming PS1 Set 100% Plug & Play with pre-installed games on 128 GB micro-SD card From Atari 2600 to PS1 to GBC – a total of over 120 game systems are included Raspberry Pi 4 Model B 4 GB Mainboard Housing modeled on the P1 game console CPU: Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5 GHz Set including power supply unit, HDMI cable and LAN cable
HutoPi Starter kit Raspberry Pi 3B+ 1 GB, 16 GB SD Broadcom BCM2837B0, Cortex-A53, 64-bit, quad-core SoC with 1.4 GHz 2.4 GHz/5 GHz IEEE 802.11 b/g/n/ac Wireless LAN Bluetooth Low Energy v4.2 (BLE) Gigabit Ethernet via USB 2.0 (maximum throughput 300 Mbps) 16 GB micro SD card with pre-installed Noobs operating system Including housing, power supply unit, HDMI cable and heat sink set
Raspberry Pi Developer board Pi Pico2 Based on the success of the original Pico, but with the brand new microcontroller chip: RP235x, created by Raspberry Pi in the UK With more powerful ARM cores, higher clock rate, SRAM and flash memory Features a new security architecture based on Arm TrustZone The Raspberry Pi Pico 2 offers improved performance and functionality while remaining compatible (hardware and software) with the previous models of the Raspberry Pi Pico family and their accessories Processor cores: Dual ARM Cortex-M33 cores Frequency: Up to 150 MHz
Raspberry Pi Developer board Raspberry Pi 4 Model B 8 GB Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5 GHz 8 GB LPDDR4-3200 SDRAM Ram Gigabit Ethernet (LAN), 2.4 GHz / 5.0 GHz IEEE 802.11ac Wlan, Bluetooth 5.0, BLE Interfaces: Micro-HDMI, USB 2.0, USB 3.0, WLAN, GPIO, Bluetooth, RJ-45 (1000Mbps) Raspberry Pi standard 40-pin GPIO header (backward compatible with older models) 2x Micro HDMI port, supports resolutions up to 4K
M5Stack Developer board ATOM Echo SoC: ESP Pico D4 with 240 MHz dual core Connectivity: USB-C, Bluetooth Low Energy 4.0, Wlan IEEE 802.11b/g/n Flash memory: 4 MB Interface: 1x IR transmitter, 2x buttons 0.5 W NS4168 loudspeaker and SPM1423 microphone Suggested applications: Bluetooth speaker, voice control, IoT projects
BBC micro:bit Developer board micro:bit V2.2 Go Arm Cortex-M4 32 bit processor, 128 kb Ram, 512 kb Flash Rom Wireless communication via Bluetooth 5.1 (BLE) Two programmable buttons to use as a controller for games or control Features a 5x5 LED matrix with 25 red LEDs Integrated motion sensor, temperature sensor, speaker and microphone Includes battery holder, USB cable and 2x AAA batteries
jOY-iT Developer board Raspberry Pi5, 8 GB set, SD, PSU, case, HDMI ARM Cortex-A76-processor VideoCore VII GPU: Enjoy high-level graphics with support for OpenGL ES 3.1 and Vulkan 1.2 Integrated graphic: Yes Interfaces: 2x HDMI, GPIO, MicroSD, PCIe expansion slot, RJ-45 (LAN), USB 2.0, USB 3.0 Dual-band 802.11ac Wi-Fi and Bluetooth 5.0/BLE Dual 4Kp60 HDMI output: for razor-sharp displays with HDR support
M5Stack Developer board M5Stamp C3 Mate with Pin Headers ESP32-C3 Based with RISC-V Processor @ 160 MHz with 4 MB Flash Memory 2.4 GHz Wifi 802.11 b/g/n Bluetooth 5.0, supports Bluetooth mesh Programmable button and RGB LED onboard Operating voltage: 5 V DC 500 mA Dimensions: 34 x 20 x 4.5 mm
Arduino Developer board Arduino GIGA R1 WiFi STM32 h747XI 32-bit microcontroller with 480 MHz Cortex M7 and 240 MHz Cortex M4 processor Murata 1DX WiFi & Bluetooth module (Wlan 802.11b/g/n 65 Mbps and Bluetooth Low Energy) 8 MB SDRAM 16 MB NOR Flash Interfaces: 76x digital I/O pins, 12x analog inputs, 12x PWM, 2x analog outputs, VRTC, 4x UART, 3x I2C, 2x SPI, audio jack, USB 2.0, USB-C Input voltage: 6 - 24 V DC or 5 V DC via USB-C
Arduino Developer board Arduino Micro Chipset: ATmega32U4 (16 MHz) 20 digital inputs/outputs, 12 analog inputs 32 KB Flash memory, 2.5 KB SRAM and 1 KB EEPROM Interfaces: GPIO, Micro-USB 2.0
jOY-iT Developer board Joy-Pi Note 2 Set 8 GB, 4x 2.4 GHz ARM Cortex-A76-Processor Audio channels: Stereo Integrated graphic: Yes Interfaces: USB type A, WLAN, HDMI, GPIO, MicroSD, USB Type C, Bluetooth, RJ-45 (1000Mbps) Ideal for educational and advanced projects Versatile interfaces for extensions
M5Stack ESP32-S3FN8 Wi-Fi + Bluetooth LE SoC, 8MB Flash, QFN56 Xtensa-Processor Audio channels: Stereo Integrated graphic: No Interfaces: 4-pin (PWM), UART, SPI, WLAN, USB Type C, Bluetooth, I2C, I2S, ADC, RMT
jOY-iT Starter kit Mega2560 Arduino Microcontroller learning set ATmega2560R3 microcontroller with 16 MHz clock frequency 54 digital inputs and outputs (14 of them PWM), 16 analog inputs 256 kB memory (8 kB reserved for the bootloader) 8 kB SRAM and 4 kB EEPROM Operating voltage: 7 - 12 V DC Learning package for beginners with 20 different projects
HutoPi Starter kit Raspberry Pi 5 8 GB Broadcom BCM2712 SOC with 2.4 GHz 64-bit Arm Cortex-A76 quad-core CPU 8 GB DDR4 Ram Dual-band 802.11ac Wi-Fi and Bluetooth 5.0 Two 4Kp60 HEVC-capable micro-HDMI connections Standard 40-pin Raspberry Pi GPIO interface Set including 32 GB micro-SD card, power supply unit, housing, HDMI cable
OXON Developer board Oxocard Science Plus GOLD Edition ESP32-MCU with 2 MB RAM and 8 MB Flash 240 x 240 pixel color display Measures temperature, air pressure, humidity, VoC, NOx, CO2, air quality, light, infrared, frequencies, noise levels, 3D depth images (ToF), gravity and 3D acceleration Printed on two sides with decorative elements Control panel with five buttons Piezo loudspeaker
Raspberry Pi Developer board Raspberry Pi Pico WH Rev3 264 KB WLAN RP2040 microcontroller with 2 MB flash memory Integrated 2.4 GHz single-band wireless interface (802.11n) 3-pin ARM serial wire debug port (SWD) Simple but highly flexible power supply architecture 12-bit 500ksps analog-to-digital converter (ADC) 2 x programmable I/O blocks (PIO), 8 state machines in total
jOY-iT Developer board Nano V3 Arduino compatible 22 digital pins (including 6 PWM capable) ATmega328P-AU microcontroller 32 kB Flash memory (2 kB reserved for the bootloader) USB interface for programming on a computer Dimensions: 45 x 18 mm Fully Aruino Nano Compatible
jOY-iT Developer board Arduino Mega 2560 Pro ATmega2560 microcontroller 256 kB flash memory, 8 kB SRAM, 4 kB EEPROM 54 digital I/O pins, including 15 PWM outputs Interfaces: I2C, Micro-USB 2.0, SPI, UART 16 analog inputs for versatile sensor applications Compatible with Arduino Mega 2560
Raspberry Pi Developer board Raspberry Pi Pico H Rev3 264 KB Dual-core ARM Cortex M0+ processor, flexible clock up to 133 MHz 264KB SRAM and 2 MB on-board flash memory Module enables direct soldering on carrier boards USB 1.1 host and device support Power-saving sleep and dormant mode 26 x multifunctional GPIO pins
OXON Developer board Oxocard Connect Innovator Kit High-quality microcontroller device with TFT screen, glass cover, joystick, USB-C, as well as revolutionary 16-pin cartridge slot Oxocard board with dual-core ESP32 chip Breadboard cartridge with two analog inputs, five digital ports,I2C, SPI, GND/V3.3 Interfaces: USB Type C, WLAN Access to the 5 V power source of the port. Red LEDs are attached to the digital pins. 5v can also be injected to power the Oxocard Connect without USB
BBC micro:bit Developer board micro:bit V2.2 Single Arm Cortex-M4 32 bit processor, 128 kb Ram, 512 kb Flash Rom Wireless communication via Bluetooth 5.1 (BLE) Two programmable buttons to use as a controller for games or control Features a 5 x 5 LED matrix with 25 red LEDs Integrated motion sensor, temperature sensor, speaker and microphone
M5Stack Developer board M5Stamp Pico, 5 piece ESP32 Based with Xtensa 32-bit LX6 SOC @ 240 MHz with 4 MB Flash memory 2.4 GHz Wifi 802.11 b/g/n Blutooth 4.2 BLE Button and RGB LED Onboard Small dimensions: 18 x 24 x 4.4 mm Packing unit: 5 pieces Sale
Raspberry Pi Raspberry Pi 500+ FR ARM Cortex-Processor Audio channels: None Integrated graphic: Yes Interfaces: Micro-HDMI, Type-A USB 2.0, WLAN, Type-A USB 3.0 (3.1 / 3.2 Gen. 1), RJ-45 (LAN), GPIO, MicroSD