Stabilisation systems (23 results)

Multiplex Flight control MULTIGyro G3- Suitable for normal airplanes, V-tail airplanes as well as delta or flying wing airplanes
- Stabilizes the flight against external influences
- No change of the usual flight behavior

Sale
Powerbox Systems Flight control iGyro 3xtra- Precise 3-axis MEMS sensor
- New rule algorithm for surface models with increased performance
- Optional GPS controlled speed compensation
- Freely selectable mounting position
- Gyro characteristic selectable in 5 levels
- Rugged aluminum housing

SKYRC Drift Gyro GC401 25 mA- Three sensor modes for different route profiles
- Active steering correction if there is a risk of slipping or drifting
- Sensitivity can be remotely controlled via the third channel
- Compact dimensions of 21 x 21 x 11 mm
- Wide operating voltage range from 4.0 to 8.4 V
- Lightweight with only 3.6 g

Multiplex Flight control Wingstabi Evolution 9 3-axis, M-LINK- Freely programmable 3-axis gyro system for all RC surface models
- Plug & Play setup possible without PC or programming via PC or Android app
- Up to 4 freely configurable flight/control phases
- 9 servo outputs, free channel assignment
- Extensive options for dampers and mixers
- Integrated M-LINK receiver incl. telemetry

EP Klebepads- Self adhesive on both sides
- For gyro and flight controllers
- Dimensions: 25 (W) x3 (H)x 25 (D) mm

Sale
Powerbox Systems iGyro SAT Sensor only- High precision 3-axis MEMS sensor with rugged aluminum housing
- Special rule algorithm for surface models
- Outputs the newly developed FastTrack Bus
- "Plug and play" with all PowerBox receivers
- Selectable mounting position
- 16bit processor for high resolution and fast signal processing

Futaba Gyroscope GY470 Tail Gyro for helicopters- Compact and ultra light
- Remote gain function allows the gyro sensitivity to be adjusted via the transmitter
- Supports S.BUS and S.BUS2
- Simple setup
- Operating voltage 4.2 - 8.4 V
- Dimensions: 20.7 x 20.7 x 11 mm, weight: 3.7 g

Multiplex Flight control Wingstabi Evolution 7 3-axis- Freely programmable 3-axis gyro system for all RC surface models
- Plug & Play setup possible without PC or programming via PC or Android app
- Up to 4 freely configurable flight/control phases
- 7 servo outputs, free channel assignment
- Extensive options for dampers and mixers
- Compatible with all major RC systems: Jeti (EX-Bus, UDI), Graupner (SUMD), Futaba (S.BUS), FrSky (S.BUS), Spektrum (SRXL), HiTEC (MAXIMA SL, OPTIMA SL), Weatronic (PPM), MULTIPLEX (SRXL), CORE (S.BUS, SRXL)

Multiplex Flight control Wingstabi Evolution 9 3-axis- Freely programmable 3-axis gyro system for all RC surface models
- Plug & Play setup possible without PC or programming via PC or Android app
- Up to 4 freely configurable flight/control phases
- 9 servo outputs, free channel assignment
- Extensive options for dampers and mixers
- Compatible with all major RC systems: Jeti (EX-Bus, UDI), Graupner (SUMD), Futaba (S.BUS), FrSky (S.BUS), Spektrum (SRXL), HiTEC (MAXIMA SL, OPTIMA SL), Weatronic (PPM), MULTIPLEX (SRXL), CORE (S.BUS, SRXL)

Multiplex Flight control Wingstabi Evolution 7 3-axis, M-LINK- Freely programmable 3-axis gyro system for all RC surface models
- Plug & Play setup possible without PC or programming via PC or Android app
- Up to 4 freely configurable flight/control phases
- 7 servo outputs, free channel assignment
- Extensive options for dampers and mixers
- Integrated M-LINK receiver incl. telemetry

Multiplex Flight control Wingstabi Evolution 16 with 35A battery backer- Freely programmable 3-axis gyro system for all RC surface models
- Plug & Play setup possible without PC or programming via PC or Android app
- Up to 4 freely configurable flight/control phases
- Integrated 35A battery backer
- 16 servo outputs, free channel assignment
- Compatible with all major RC systems: Jeti (EX-Bus, UDI), Graupner (SUMD), Futaba (S.BUS), FrSky (S.BUS), Spektrum (SRXL), HiTEC (MAXIMA SL, OPTIMA SL), Weatronic (PPM), MULTIPLEX (SRXL), CORE (S.BUS, SRXL)

Multiplex Flight control Wingstabi Evolution 16 M-LINK with battery backer- Freely programmable 3-axis gyro system for all RC surface models
- Plug & Play setup possible without PC or programming via PC or Android app
- Up to 4 freely configurable flight/control phases
- Integrated 35A battery backer
- 16 servo outputs, free channel assignment
- Integrated M-LINK receiver incl. telemetry

Futaba Flybarless system CGY-755 3-axis with programming box- 3-in-1 solution: flybarless gyro, tail rotor gyro and integrated speed controller (governor)
- Operating voltage: 4.2 - 8.4 V
- Swashplate types: H3-90; H3-120; H3-140; H4-00; H4-45
- Speed range (head): 700 rpm - 4000 rpm
- Dimensions gyroscope: 37.5 x 26.8 x 16.0 mm
- GPB-1 programming box included

Futaba Flybarless system CGY-760R- 3-axis gyro unit with receiver and governor
- Receiver modulation: FASSTest (18 channel mode, 12 channel Hi-Speed mode or T-FHSS AIR
- Supports swashplate types H3-90, H3-120, H3-140, H4-00 and H4-45
- Wireless programmable parameters via optional GBP-1 programming box, updateable firmware
- Small size and low weight
- Housing made of high quality anodized aluminum, 4 holes on the bottom side are used for mounting in the heli

Futaba Flybarless system CGY-755 3-axis- 3-in-1 solution: flybarless gyro, tail rotor gyro and integrated speed controller (governor)
- Operating voltage: 4.2 - 8.4 V
- Swashplate types: H3-90; H3-120; H3-140; H4-00; H4-45
- Speed range (head): 700 rpm - 4000 rpm
- Dimensions gyroscope: 37.5 x 26.8 x 16.0 mm
- Weight: 20.2 g

Yeah Racing Drift Gyro Hackslider Red- Gyro with special drift firmware
- Helps you to drive precise drifts
- Adjustable sensitivity via additional channel on the remote control
- Aluminum housing
- Small dimensions of 26.8 x 25.2 x 9.8 mm
- Operating voltage: 4.8 - 7.4 V