Mixing desk accessories (22 results)
Bose Mains adapter for T8S, T4S and T1- For powering «T8S», «T4S» and «T1" «ToneMatch» mixers and audio engine
- Not required for direct connection to an L1 Model II or L1 Model 1S.
- Load capacity: 100 to 240 volts
Behringer Expansion card Wing-DANTE- 24-bit/192 kHz AD conversion for high sound quality and precise signal transmission
- MIDI I/O for seamless integration into studio setups or live environments
- AES/EBU outputs and SPDIF for digital signal processing
- 1U rackmount design – compact and space-saving for any studio or rack
- XLR and TRS combo jacks for flexible connection options
- Extended compatibility with digital audio systems and software
Offer
Yamaha Tio1608-D2- The latency is less than 1.3 ms at 96 kHz and approx. 2.6 ms at 48 kHz
- Frequency response ±1.5 dB over 20 Hz-20 kHz, harmonic distortion below 0.05%
- Set up via Quick-Config or Auto-Config via network settings and audio routing
- All inputs can be centrally controlled and used multiple times
- Dante ports enable redundant network connections or daisy-chaining
- Full 96 kHz compatibility for professional audio quality
Solid State Logic Rack adapter BiG SiX- Includes two rackmount consoles and hardware for mounting the SSL Big SiX Mixer in a 19" rackMount the SSL Big SiX Mixer in a 19" rack.
- Requires a standard 19" rack with 10 slots to install BiG SiX
- The kit includes rack ears and screws
Yamaha Rack adapter RK5014- Rack mount kit for Yamaha TF1, EMX5016CF and EMX5014C mixing consoles
- Assembly kit is composed on 2 parts - one part per side
Allen & Heath ME-U- Each port can be connected to the ME-1 and ME-500 mixing consoles and supplies power to 40 audio sources
- 10 ports with lockable Ethercon connectors
- Daisy chain ME-Us for more outputs up to 19 ME-1/ME-500 with 2 hubs
- Connected ME-1 s automatically adopt channel names from SQ or dLive mixers
- Option cards for connection to other systems: Dante, MADI, EtherSound, Waves (V2 card)
- Touring-level build quality
Rode Backpack – RodeCaster Pro II- Designed for safe transport of the RodeCaster Pro or RodeCaster Pro II
- For safe storage of microphones, holders, cables and other accessories
- Special padded laptop compartment for laptops up to 16".
- Modular and padded equipment compartments for safe organization of equipment
- Made of rugged, durable and luxurious materials, including water resistant exterior, ballistic nylon and alcantara carrying handle
- Lightweight design with ergonomic shoulder straps, back support and chest strap
Allen & Heath AR2412 AudioRack- 48kHz AudioRack with 24 XLR inputs and 12 XLR outputs
- Compatible with Allen and Heath Qu, Avantis, and SQ mixing consoles and the AHM-64 Audiomatrix processor.
- Expander Ethercon connector for connection to an Allen and Heath AR84 or AB168
- Placement of some or all I/Os at a distance of up to 100 m from the mixing console via Cat5 cable with dSNAKE protocol
- Dedicated port for ME Personal Mixing System
- Rack-mountable
Allen & Heath DX168 AudioRack- 16 microphone preamps with LED indicators and 8 XLR line outputs
- Compatible with dLive, Avantis, SQ and AHM-64
- DX A connector with lockable Ethercon port
- DX B connector with lockable Ethercon port for cascading/redundancy
- Robust design with rubber buffers for placing on the stage floor
- Weighs only 4.8 kg and is equipped with a carrying handle, making it convenient and easy to transport
Behringer Expansion card X-Dante- 32 channels, 48 kHz, bi-directional audio interface
- High-speed signal transmission with 24-bit
- Full remote control of the X32 and use of Ethernet circuitry
- Low latency
Yamaha Rack adapter RK-MG12- Rack Mount Kit for MG12 and MG12XU Mixers from Yamaha
- Assembly kit is composed on 2 parts - one part per side
Allen & Heath AR84 AudioRack- Suitable for SQ, Qu, Avantis, AHM-64, GLD from Allen and Heath
- 8 microphone preamps on XLR
- 4 XLR line outputs
- Placement of some or all I/Os at a distance of up to 100 m from the mixing console via Cat5 cable with dSNAKE protocol
- Can be connected directly to the mixer or cascaded from an AR2412 or AB168
- Rack-mountable
Allen & Heath GX4816 AudioRack- 48 dLive microphone preamps with phantom power LED indicators and 16 XLR line outputs
- 96 kHz audio expander providing remote inputs for various mixers and audio matrix processors
- 2 DX ports to which up to 4 DX expanders can be connected for more I/O expansion
- Can be connected to an ME Personal Mixing System with SQ or Avantis via the DX2 socket
- Flexible and powerful device that offers high audio quality and easy installation
- Rack-mountable
Yamaha Adapter BMS-10A- For mounting a lighter mixer on a microphone stand
- Suitable for: MG10XU, MG10, MG06X, MG06, AG06, AG03, EMX2, S15, MSP3A, MSP3, MS101III, Stagepas 600i, Stagepas 400i, Stagepas 600BT, Stagepas 400BT
- Load capacity: 5 kg
- Net weight: 0.24 kg
Allen & Heath AB168 AudioRack- Compatible with Allen and Heath Qu, Avantis, and SQ mixing consoles and AHM-64 audio matrix processor
- 16 microphone preamps with phantom power indicators and 8 XLR line outs
- Expander connection for daisy-chaining 2 AB168 expanders or for connecting ME mixers
- Compatible with CAT5e (or higher) cables up to 100m
- Robust construction of the rack, including rubber bumpers
- Rack-mountable
Yamaha Rack mounting kit RK-DM3 – Yamaha DM3 and DM3 Standard
SaleSolid State Logic Rack adapter UF8
SaleSolid State Logic Rack adapter UC1
Yamaha Rack adapter RKEMX 7
