Microphone accessories (135 results)
- +3
Shure Windbreak A100WS- Compatible with KSM137 and KSM141
- Microphone foam windscreen
- Reduces unwanted breathing and wind noise
- +1
Shure Windbreak A58WS-GRN- Compatible with PGA48/58, SM48/58, Beta58 and 565
- Microphone foam windscreen
- Reduces unwanted breathing and wind noise
Also available in: - +20
Vonyx Acoustic screen MRF30- Isolation filter as a compact solution for microphone isolation
- 5-piece perforated metal screen
- Adjustable side panels for different insulation
- Pyramid shaped acoustic foam front
- Absorbs unwanted room noise and reflections
- For mounting on a microphone stand or as a table stand
- +3
Rode Windbreak WS11- Windscreen for VideoMic NTG
- Reduces wind noise without degrading sound quality
- From faux fur
- Diameter: 85 mm
- Length: 125 mm
- Weight: 21 g
- +2
Rode Cable SC15- High-quality Lightning cable for connecting MFi-certified USB-C microphones
- Length: 30 cm
- Not suitable for charging - can only be used as a connection cable
- Ideal cable management
- +4
Shure Windbreak A58WS-BLK- Compatible with PGA48/58, SM48/58, Beta58 and 565
- Microphone foam windscreen
- Reduces unwanted breathing and wind noise
Also available in: - +3
sE Electronics Reflection filter X 4-layer design black- Patented multi-layer technology to reduce room influences
- Four acoustic layers made of composite material, wool and foam
- Lightweight, ventilated housing for easy mounting on tripods
- Almost sound-neutral recording thanks to uniform frequency filtering
- Ideal for vocal and instrument recordings in home studios
- Including mounting bracket and thread adapter
- +7
Shure Replacement basket RK143G- Spare basket for SM58
- Also for SM58 wireless microphone head (RPW112)
- +3
Shure Windbreak A58WS-GRA- Compatible with PGA48/58, SM48/58, Beta58 and 565
- Microphone foam windscreen
- Reduces unwanted breathing and wind noise
Also available in: - +6
Rode Windbreak WS12- Professional windscreen for Rode microphone Videomic GO II
- Open cell foam covered with synthetic fur
- Reduces wind and other annoying background noise
- Includes synthetic rubber wind seal to protect unused interfaces
- Also suitable for strong wind
- Easy to attach and remove
- +1
Speedlink VOLITY Streaming Accessories Set- Perfect complement for streaming microphones
- Pop filter with practical goose-neck for clear speech transmission
- Shock mount as a secure hold for the microphone
- Dimensions microphone arm: 700mm (total length)
- Adjustable and swiveling microphone arm with table mounting device
- +5
Shure Microphone clip A25D- Microphone clamp
- For all Shure microphones with a thicker shaft (approx. 25 mm - 30 mm)
- Color: Black
- +1
Gravity Bracket MS STB 01 PRO- Stereo array bar for 2 microphones
- Adjustable microphone spacing 6 - 29 cm
- Microphone swivel range +/- 90°
- +/- 90° tilt range
- Easy-to-read markings for precise adjustment
- ORTF markings
- +2
Shure Windbreak A58WS-BLU- Compatible with PGA48/58, SM48/58, Beta58 and 565
- Microphone foam windscreen
- Reduces unwanted breathing and wind noise
Also available in: - +12
Shure Bag – Shure SM58- Compatible with Shure SM 58, Beta58 and SM 57 microphones
- Dimensions: 250 x 110 mm
- Color: black
- Shure logo on the front
- Material: Nylon
- +2
Shure Windbreak A58WS-RED- Compatible with PGA48/58, SM48/58, Beta58 and 565
- Microphone foam windscreen
- Reduces unwanted breathing and wind noise
Also available in: - +4
sE Electronics V7 MC2 Microphone capsule for Sennheiser, black- Dynamic DMC7 capsule with supercardioid polar pattern for excellent feedback suppression
- Innovative aluminum voice coil for a natural and open sound
- Robust, all-metal housing and durable spring steel grill for high reliability
- Integrated patented shock absorber mount efficiently minimizes handling noise
- Compatible with Sennheiser handheld transmitters via lossless gold-plated contacts
- Includes two internal windscreen options in red and black
- +4
Gravity GMAVARIARML38 Articulated arm- Swivel arm for free arrangement of equipment
- Sturdy steel construction
- One main adjustment screw for loosening and tightening all joints
- 2 x 3/8" thread
- Solid mounting clamp with a large clamping range (15-35 mm)
- Incl. 1/4" reduction thread
- +10
Shure Windbreak RK345- Small snap-in foam windscreen
- Compatible with SM7, SM7A and SM7B models
- Reduces wind and other disturbing background noise
- +2
sE Electronics V Clamp Metal, thermoplastic, elastic- Compact microphone holder system especially for snare and tom drums
- Robust and elastic clamp for installation in seconds
- Vertically adjustable boom for flexible microphone placement
- Three axes of movement for maximum flexibility
- Durable construction made of metal and high-quality thermoplastic
- Suitable for all microphones with 3/8 inch thread
- +1
Warm Audio Case WA-47- Customized foam insert for microphone and accessories
- Padded lid
- Sturdy aluminum frame
- Black plywood exterior
- Dimensions: 43 x 20.5 x 23 cm
- Weight: 3 kg
- +1
Radial HotShot DM1- Passive switch for dynamic microphones enables communication on stage
- One XLR input and two XLR outputs for signal distribution and monitoring
- Robust construction made of 14-gauge steel with powder coating for everyday touring
- Momentary footswitch for silent switching and mute function
- Switchable ground lift on output 2 to avoid ground loops
- Fully passive design requires no external power supply
- +1
Gator Case for 7 Shure wireless microphones and accessories- Suitable for up to 7 wireless microphones with storage space for receiver, beltpack transmitter and accessories
- TSA-approved locking bar Ideal for air travel
- Protective, foam-lined interior with 2 removable compartments and 4 adjustable dividers
- Heavy-duty polyethylene construction
- Dimensions for each microphone ejector (L x D): 260 mm x 57 mm
- External dimensions (L x W x H): 432 x 229 x 305 mm
- +4
Gator Bracket GFW-MICACCTRAY- Accessory tray for microphone stand
- Integrated cup holder
- Holder for guitar picks
- +4
sE Electronics Reflexion Filter Pro Multilayer aluminum black- Patented multi-layer technology for even absorption
- Reduces room reflections and background noise
- Special matt black acoustic fabric and aluminum back panel
- Suitable for vocal and guitar microphones
- Includes flexible microphone stand mount with screw clamp
- Enables pure recordings without sound coloration
- +2
Gator Cable holder for microphone stand- Cable holder for microphone stands
- Practical organization of audio cables
- Compact dimensions 21.0 x 21.0 x 3.0 cm
- Low weight of 1.0 kg
- +5
Shure Cable AMV-LTG15- Replacement Micro-B cable with Lightning connector for MV7 and MV88+ microphones
- Cable length: 38 cm
- Color: Black
- +1
Shure Replacement basket RK265G- Replacement basket for Beta 58A
- Also for Beta 58A wireless microphone head (RPW118)
- +2
sE Electronics RF-X Red Black- Mobile absorber with multi-layer technology for dry recordings
- Reduces unwanted room influences and reflections during microphone recordings
- Four-layer design made of composite panel, wool, air gap and acoustic foam
- Lightweight and ventilated housing for maximum flexibility
- Easy mounting on standard microphone stands thanks to efficient clamp
- Uniform frequency filtering across the entire spectrum for discoloration-free recordings
- +6
sE Electronics V7 MC2 Dynamic, supercardioid, gray- Dynamic DMC7 capsule with supercardioid characteristic
- Frequency response from 40 Hz to 19 kHz for natural sound
- Robust all-metal construction made of zinc alloy
- Patented integrated vibration damping against noise
- Compatible with all Sennheiser handheld transmitters
- Includes integrated windscreen and replacement windscreen
- +2
sE Electronics SE8 Capsule Omnidirectional, small diaphragm, pair- Handcrafted gold-plated small-diaphragm condenser capsules
- Omnidirectional characteristic for natural and transparent sound
- Frequency range from 20 Hz to 20.000 Hz for precise recordings
- High sound pressure level up to 161 dB SPL with attenuators
- Extremely low self-noise of only 13 dB to 15 dB
- Compatible with sE Electronics sE8 microphones
- +2
SaleShure Microphone spider A27SM- Compatible with Shure microphones BETA 27 / PG27USB / PG42USB / PGA27
- Microphone spider in black
- +4
sE Electronics RF-X White metal- Reduces room influences and background noise for clean recordings
- Four-layer acoustic filter design for even frequency filtering
- Lightweight and ventilated housing made of robust metal
- Quick and easy mounting on most microphone stands
- Ideal for home recording projects and vocal booths
- Including mounting bracket and tripod thread adapter
- +2
sE Electronics GuitaRF Reflective filter- Four-layer acoustic filter design for optimum absorption and insulation
- Integrated holder for two microphones simultaneously
- Includes height-adjustable stand for precise positioning
- Specially designed for miking guitar and bass amplifiers
- Triaxially adjustable mounting hardware for large diaphragm microphones
- Compact design with high acoustic efficiency
- +2
Rode Bracket Interview GO- Turns any Wireless GO transmitter into a handheld microphone
- Includes handle and removable high density windscreen
- Compatible with the Wireless GO and Wireless GO II
- Stable attachment for the Wireless GO cold shoe clip
- +2
Rode Hinge Boompole Pro- Ultra-lightweight 5-segment telescopic fishing rod
- Low weight of 535 g
- Made from carbon
- Size adjustable from 81-300 cm
- Designed for use with shotgun microphones
- +2
Rode Bracket DCS-1 Hot shoe- Double hot shoe mount
- Robust construction
- Lightweight and inconspicuous
- Stable base with 1/4 inch thread
- +2
Rode Microphone spider SM6- Suitable for Rode K2, NTK, NT2000, NT2-A, NT1000, NT1-A, NT1-A Matched Pair, Procaster, Podcaster, DS1
