Nuts & washers (171 results)
- +7500
NewOK-LINE Lock Nuts A2 DIN 985- Stainless Steel A2 Locknut
- Thread size M 6
- Drive SW 10
- Height: 6 mm
- DIN 985 Standard
- Tensile strength 700 N/mm²
- +700
NewOK-LINE Hex nuts with flange, A2 stainless steel, M 10- A2 stainless steel flange nut
- Thread size M 10
- Drive SW 15
- Height: 21.8 mm
- Tensile strength 500 N/mm²
- Package contents: 100 pieces
- +3000
NewOK-LINE Wedge Washer DIN 6798- Fan-shaped washer made of high-quality A2 stainless steel
- Complies with the DIN 6798 standard for reliable fastenings
- Outer diameter of 10 mm and inner diameter of 5.3 mm
- 1.8 mm material thickness for a secure hold
- The package contains 1.000 pieces
- Ideal for tools and fastening technology
- +3000
NewOK-LINE Washers DIN 433 A2 Stainless Steel 5.3 mm x 9 mm x 1 mm- Made of high-quality A2 stainless steel
- DIN 433 Standard for Narrow Washers
- Inner diameter of 5.3 mm
- Outer diameter of 9 mm
- Material thickness of 1 mm
- Bulk package containing 1.000 pieces
- +600
NewOK-LINE Cap nut DIN 917 low, A2 stainless steel- Low-profile cap nut
- Made of high-quality A2 stainless steel
- Thread size M 5
- SW 8 wrench size for secure tightening
- 7 mm high
- The package contains 200 pieces
- +12000
NewOK-LINE Washers DIN 9021 A2 B Stainless Steel- Made of A2 stainless steel for high corrosion resistance
- Suitable for hexagonal wood screws
- DIN 9021 B standard with a large outer diameter
- Thickness with a tolerance of +/- 0.2 mm
- Outer diameter 18 mm and inner diameter 6.4 mm
- Pack of 1.000
- +3928
NewOK-LINE Hex Nuts DIN 934 A2 stainless steel- Hex nut made of A2 stainless steel
- Thread size M 6
- Height: 5 mm
- Package contents: 100 pieces
- DIN 934 Standard
- Weight: 2.200 g
- +15
NewOK-LINE Long nuts A2 Stainless Steel DIN 6334- Long nut made of A2 stainless steel
- M 20 thread
- Drive SW 30
- Height 60 mm
- DIN 6334 Standard
- Tensile strength 500 N/mm²
- +4
NewOK-LINE Spacer block- Flat design with a 12.5 mm slot width
- Precise installation with a minimum distance of 0.5 mm from the base
- High ball-indentation hardness of 358 N/mm²
- Thermal resistance up to 70 °C HDT
- Flammability Class HB and 650 °C glow-wire test
- Dielectric strength of 16 kV/mm
- +150NewOK-LINE Washers DIN 9021 A2 Stainless Steel
- Made of A2 stainless steel
- Complies with the DIN 9021 B standard
- Outer diameter of 56 mm
- Inner diameter of 20 mm
- Thickness of 4 mm with a tolerance of +/- 0.2 mm
- Pack of 50
- +45
OfferSaleFTM Ring nuts steel galvanized M16, 2 piece- Nut type: Ring nut
- Thread type: M16
- Material: Steel, Surface: Galvanised
- Packaging unit: 2
- +778
NewOK-LINE Washers A2 stainless steel without chamfer, DIN 125 A- Made of high-quality A2 stainless steel
- Suitable for hex screws and nuts
- Complies with DIN 125, Form A
- Made without a bevel
- Pack contains 200 pieces
- Sturdy 3-mm-thick material
- +8000NewOK-LINE Washers DIN 9021 A2 stainless steel, 1 mm
- Made of A2 stainless steel
- Complies with the DIN 9021 B standard
- Suitable for hexagonal wood screws
- Outer diameter of 12 mm
- Inner diameter of 4.3 mm
- 1 mm thick, with a tolerance of +/- 0.2 mm
- +53
NewOK-LINE Spacer / Wedge Gray Polystyrene 45 x 30 mm- Made of polystyrene
- Dimensions: 45 x 30 mm
- Flammability Class HB and 650 °C glow-wire test
- Bending temperature under load: 70 °C
- Dielectric strength: 16 kV/mm
- Can be mounted on a VARIO180 spacer block
- +4605NewOK-LINE Washers DIN 125 A A2 stainless steel, without a bevel
- Made of high-quality A2 stainless steel
- Complies with the DIN 125 Form A standard
- Without a chamfer for precise fastening
- Suitable for hex screws and nuts
- Outer diameter of 20 mm and inner diameter of 10.5 mm
- Material thickness of 2 mm
- +2143NewOK-LINE Hex nut DIN 934, A2 stainless steel
- Hex nut made of A2 stainless steel
- Thread size M 10
- Height: 8 mm
- Complies with the DIN 934 standard
- Pack of 200
- High-quality stainless steel for corrosion resistance
- +700
NewOK-LINE Drive-in nuts A2 Stainless Steel, M 8, 11 mm- A2 Stainless Steel Drive-In Nut
- M 8 thread
- Drill bit diameter: 10 mm
- Height: 11 mm
- Diameter 22.2 mm
- Pack of 100
- +3469NewOK-LINE Hex nuts A2 Stainless Steel DIN 934
- Hex nut made of A2 stainless steel
- M 8 thread
- Height: 6.5 mm
- DIN 934 Standard
- Package contents: 500 pieces
- High-Quality Fastening Technology
- +300NewOK-LINE Drive-in nuts A2 Stainless Steel, M5, 8 mm, 17 mm
- A2 Stainless Steel Drive-In Nut
- M 5 thread
- Drill bit diameter: 6.2 mm
- Height: 8 mm
- Diameter 17 mm
- Pack of 100
- +800NewOK-LINE Drive-in nuts A2 Stainless Steel
- A2 Stainless Steel Drive-In Nut
- M 6 thread
- Drill bit diameter: 7.5 mm
- Height: 9 mm
- Diameter 19 mm
- Pack of 100
- +64
NewOK-LINE VARIO180 Spacer Block U-Shaped Polystyrene, Gray- Slot width: 12.5 mm
- Stackable for flexible height adjustment
- Can be inserted into a mating part to form a washer
- Polystyrene material with flammability class HB
- High ball-indentation hardness of 358 N/mm²
- Temperature-resistant up to 70 degrees Celsius
- +1001NewOK-LINE Washers DIN 433 A2 Stainless Steel 20 mm 13 mm 2 mm
- Made of high-quality A2 stainless steel
- Complies with the DIN 433 standard
- Outer diameter of 20 mm
- Inner diameter of 13 mm
- Material thickness of 2 mm
- The package contains 200 pieces
- +6000
NewOK-LINE Lock Nuts, Hexagonal, DIN 985 A2 stainless steel- Stainless Steel A2 Locknut
- Thread size M 8
- Drive SW 13
- Height: 8 mm
- Tensile strength 700 N/mm²
- Complies with the DIN 985 standard
- +3000NewOK-LINE Washers DIN 433
- Made of high-quality A2 stainless steel
- DIN 433 Standard for Narrow Washers
- Outer diameter of 15 mm
- Inner diameter of 8.4 mm
- Material thickness of 1.6 mm
- The package contains 500 pieces
- +800NewOK-LINE Washers DIN 9021
- Made of A2 stainless steel
- Suitable for hexagonal wood screws
- Complies with the DIN 9021 B standard
- Outer diameter of 37 mm
- Inner diameter of 13 mm
- 3 mm thick with a tolerance of +/- 0.2 mm
- +5899NewOK-LINE Washers DIN 9021 A2 stainless steel 24 mm 8.4 mm 2 mm
- Made of A2 stainless steel
- Complies with the DIN 9021 B standard
- The outer diameter is 24 mm
- The inner diameter is 8.4 mm
- 2 mm thick with a tolerance of +/- 0.2 mm
- Suitable for hexagonal wood screws
- +2350NewOK-LINE Washers DIN 9021
- Made of high-quality A2 stainless steel
- Complies with the DIN 9021 B standard
- Suitable for hexagonal wood screws
- Outer diameter of 30 mm and inner diameter of 10.5 mm
- Material thickness of 2.5 mm with a tolerance of +/- 0.2 mm
- Bulk package containing 500 pieces
- +800NewOK-LINE Cap nut DIN 917 low, A2 stainless steel
- Low-profile cap nut
- Made of A2 stainless steel
- Thread size M 8
- Wrench size SW 13
- 12 mm high
- Tensile strength 500 N/mm²
- +2000
NewOK-LINE Hex Nuts DIN 439 narrow A2 stainless steel M 4- Narrow hex nut
- Material: A2 stainless steel
- DIN 439 Standard
- M 4 thread
- Drive SW 7
- Package contents: 1.000 pieces
- +2500NewOK-LINE Washers DIN 433 A2 Stainless Steel 18 mm 10.5 mm 1.6 mm
- Made of high-quality A2 stainless steel
- Design in accordance with DIN 433
- Outer diameter of 18 mm
- Inner diameter of 10.5 mm
- Material thickness of 1.6 mm
- Bulk package containing 500 pieces
- +2000
NewOK-LINE Wedge Washer DIN 6798- Fan-shaped washer made of high-quality A2 stainless steel
- Complies with DIN 6798
- Outer diameter of 11 mm
- Inner diameter of 6.4 mm
- The thickness of the disc is 2.1 mm
- The package contains 1.000 pieces
- +3000NewOK-LINE DIN 433
- Made of high-quality A2 stainless steel
- Complies with the DIN 433 standard
- Outer diameter of 11 mm
- Inner diameter of 6.4 mm
- Material thickness of 1.6 mm
- The package contains 1.000 pieces
- +17NewOK-LINE Spacer block U-shaped polystyrene, gray, 45 x 30 x 4 mm
- Flat design with a 12.5 mm slot width
- Precise installation with a minimum distance of 0.5 mm from the base
- Gray polystyrene material
- Flammability Class HB and 650 °C glow-wire test
- High ball-indentation hardness of 358 N/mm²
- Dimensions: 45 mm long and 30 mm wide
- +200NewOK-LINE Drive-in nuts A2 M 12 13 mm, 27 mm diameter
- A2 Stainless Steel Drive-In Nut
- M 12 thread
- Height: 13 mm
- Diameter 27 mm
- Drill bit diameter: 14.5 mm
- Pack of 100
- +200NewOK-LINE Drive-in nuts A2 M 10
- A2 Stainless Steel Drive-In Nut
- M 10 thread
- Drill bit diameter: 11.5 mm
- Height: 12 mm
- Ø 25 mm
- Pack of 100
- +8000NewOK-LINE Washers DIN 9021 A2 stainless steel 15 mm 5.3 mm 1.2 mm
- Made of high-quality A2 stainless steel
- Complies with the DIN 9021 B standard
- Outer diameter of 15 mm
- Inner diameter of 5.3 mm
- Material thickness of 1.2 mm with a tolerance of +/- 0.2 mm
- Suitable for hexagonal wood screws
- +30
NewOK-LINE Spacer / Wedge Gray Polystyrene 45 x 30 mm- Made of polystyrene
- Dimensions: 45 x 30 mm with a 13 mm slot
- Heat Deflection Temperature (HDT) under load: 70 °C
- Flammability Class HB and 650 °C glow-wire test
- Dielectric strength: 16 kV/mm
- Ball indentation hardness of 358 N/mm² and yield strength of 24 MPa
- +4800NewOK-LINE Hex Nuts with Flange, DIN 6923
- A2 stainless steel flange nut
- Thread size M 6
- Drive SW 10
- Height: 14.2 mm
- Tensile strength 500 N/mm²
- Package contents: 200 pieces
- +400NewOK-LINE Hex Nuts DIN 934 A2 stainless steel
- Hex nut made of A2 stainless steel
- Thread size M 16
- 13 mm high
- DIN 934 Standard
- Pack of 100
- Weight per unit: 31.200 g
- +199NewOK-LINE Hex Nuts DIN 934 A2 stainless steel
- Hex nut made of A2 stainless steel
- Thread size M 20
- Height: 16 mm
- Stainless Steel Quality
- Pack of 50
- +390NewOK-LINE Washers DIN 9021 A2 stainless steel
- Made of A2 stainless steel
- Standard according to DIN 9021 B
- Outer diameter of 50 mm
- Inner diameter of 17 mm
- Thickness of 3 mm with a tolerance of +/- 0.2 mm
- Suitable for hexagonal wood screws
- +800NewOK-LINE Wedge Washer DIN 6798 A2 stainless steel
- Made of high-quality A2 stainless steel
- Complies with the DIN 6798 standard
- Outer diameter of 33 mm
- Inner diameter of 21 mm
- The thickness of the disc is 4.2 mm
- The package contains 200 pieces
- +800NewOK-LINE Cap nut DIN 917 down, A2
- Low-profile cap nut
- Made of A2 stainless steel
- Thread size M 6
- Wrench size SW 10
- Height: 9 mm
- Tensile strength 500 N/mm²
- +9NewOK-LINE Spacer / Wedge Gray Polystyrene 45 x 30 mm
- Made of polystyrene
- Dimensions: 45 x 30 mm, thickness: 5–10 mm
- Heat Deflection Temperature (HDT) under load: 70 °C
- Dielectric strength: 16 kV/mm
- Flammability Class HB
- Can be attached to the VARIO180 without a retaining clip or slot
- +1000NewOK-LINE Washers DIN 433 A2 stainless steel, 2.5 mm
- Made of high-quality A2 stainless steel
- Complies with the DIN 433 standard
- Outer diameter of 28 mm
- Inner diameter of 17 mm
- The material thickness is 2.5 mm
- The package contains 200 pieces
- +11000NewOK-LINE Hex Nuts DIN 439 narrow, A2 stainless steel, M 5
- A2 stainless steel flat nut
- Thread size M 5
- Drive SW 8
- Height: 2.7 mm
- DIN 439 Standard
- Package contents: 1.000 pieces
- +98NewOK-LINE Spacer block U-shaped polystyrene, gray, 45 x 30 x 10 mm
- Flat design with a slot width of 12.5 mm
- Precise installation is possible using spacers with a distance of 0.5 mm or more
- Made of gray polystyrene
- Dimensions: 45 mm long and 30 mm wide
- High ball-indentation hardness of 358 N/mm²
- Flammability Class HB and Glow-Wire Test at 650 °C
- +1000NewOK-LINE Cap nut A2 stainless steel, DIN 917
- Loosen the cap nut
- Material: A2 stainless steel
- M 4 thread
- Drive SW 7
- Height: 5.5 mm
- Tensile strength 500 N/mm²